In the car. Meanwhile, this is an old system that previously could only maintain the speed of the car, and the driver did not have to hold the gas pedal. This system provided additional convenience and comfort when driving on highways and highways. As a result of using cruise control, the driver becomes less tired behind the wheel. Also, in theory, this helps reduce fuel consumption, since the engine runs evenly when using the system, and its speed does not jump.
Why do you need cruise control in a car?
This system is needed to provide additional convenience when traveling long distances. For example, if a driver needs to get from one city to another, covering 500-600 kilometers, then in a car without this system he will have to hold the gas pedal for 5-6 hours (depending on the speed), which is actually equal to holding right foot in an awkward position. During the entire journey, you want to change the position of your leg, but you can’t do this. It seems like a small thing, but holding the gas pedal for 5-6 hours is actually very difficult.
By activating the cruise control function in the car, the driver can allow himself to release the gas pedal. The system will supply fuel to the combustion chambers not through the gas pedal, but through special pneumatic drives. The driver will be able to regulate the speed using buttons located on the steering wheel (usually there are 5 buttons).
System management
Now that we understand what it is - cruise control in a car, we can figure out how it works. Typically, to control this system there are 5 buttons on the steering wheel:
- On/Off button that activates and deactivates the system.
- Switch for fixing the speed mode and increasing the speed. That is, after accelerating to the required speed, the driver can use a switch to fix the current speed and release the gas pedal. Subsequent presses of this button will increase the speed by 1 km per hour.
- If, while using cruise control, the driver had to suddenly accelerate or brake by pressing the gas or brake pedal, the parameters of this system are reset. To quickly activate cruise control and return to the previously set speed, the driver needs to press the Resume button.
- Coast speed reduction button. Each press of the button reduces the speed by 1 km. In some models, the step of decreasing and increasing speed is 1.5 km.
- The Cancel button deactivates the system.
Depending on the car model, this system may be represented by other buttons; the speed increase and decrease steps may differ. But the principle looks exactly as described above.
Kinds
There are several types of cruise control in a car. What does passive or active type mean? In the first case, the driver can only set the speed of the car. However, the second type involves the use of complex electronic devices that scan the space in front of the car, which opens up additional possibilities for controlling the vehicle depending on driving conditions.
Passive type (PPC)
As we have already found out, passive cruise control allows you to maintain a given speed, which is convenient for long trips over long distances. Due to the constant speed of the engine, fuel savings are ensured.
The control is turned off when the driver lightly presses the gas pedal. The design of such a system has a special pneumatic drive that regulates the flow of air-fuel mixture into the combustion chamber through a throttle valve. This eliminates the need to use the gas pedal.
Active (or adaptive) type
Adaptive cruise control is an advanced version of the active type. In addition to the ability to maintain the speed limit without pressing the gas pedal, cars with adaptive cruise control can calculate the distance to the car in front, and also reduce or increase speed depending on the situation on the road. That is, if the system determines that the distance to the car in front is decreasing, then the system slows down the speed. The speed is reduced until the gap between the cars, in the opinion of the system, becomes optimal. If the sensor no longer sees an obstacle ahead, the car picks up speed and maintains this speed limit.
Safety
The adaptive cruise control system on the car is quite smart; it provides not only comfort when driving on highways and highways, but also the safety of the driver, who may be too relaxed on the road.
In addition, this system can perform not only emergency braking, but also evasive maneuvers. This greatly increases driving safety, and often such systems have saved people's lives and the integrity of the vehicle itself in various driving situations.
Note that adaptive (or active) cruise control is closely related to the operation of the ABS and ESP systems (stabilization and anti-traction systems), and if at least one of them stops working, then cruise control cannot be activated either.
Dynamic type
In addition to adaptive and passive cruise control, there is also dynamic cruise control. It is one of the varieties of the passive type. A special feature of this system is the control of engine operation, which saves fuel and engine life.
For example, when climbing a hill, the system slows down and slows down, which protects the motor from unnecessary loads. Also, the speed is reduced if any problems occur with the engine and when the car enters turns. After passing the turn, the previous speed is restored.
Now we have figured out what it is - cruise control in a car. Let's determine its main advantages and disadvantages.
pros
The advantages of this system are obvious to every driver. First of all, it is comfortable driving and reduces stress on the back due to the absence of the need to keep your foot on the gas pedal. Some drivers note fuel economy as an advantage of such a system. In theory, savings are achieved by ensuring uniform operation of the engine and the absence of differences in fuel injection. In addition, if adaptive cruise control is installed, it also provides additional safety for the vehicle.
Flaws
The main disadvantage is the high cost of the system. Cars with cruise control systems are expensive and unaffordable for most consumers. However, cars with conventional passive systems are already available to the middle class of consumers.
If you believe the reviews of some drivers who actively use this system, there is no fuel economy at all, and in some cases there is even increased consumption. Another serious drawback is the unsafe use of the system due to the fact that the driver may become too relaxed while driving the car. Constantly keeping your foot on the gas pedal, you won’t be able to relax much.
The next disadvantage is the inability to use the system on roads with frequent descents and turns, as well as on highways with heavy traffic flow. There is no need to talk about using the system in the city at all.
Many drivers do not recommend using this system on the roads after or during rain, since the driver needs to feel the car when braking. Otherwise, it may lead to an accident. This system is suitable only for those drivers who often travel from city to city. In city driving, the function is practically useless, since in the city there are no long sections of the highway where it would be possible to maintain a stable speed for a long time.
Conclusion
Now we finally understand what it is in a car - cruise control. Such a system is really useful and necessary - it should be in every car. Gradually, such systems appear in middle-class and even budget-class cars, but so far these are just passive varieties. In addition, this system can be installed even on a car in which this technology is not provided by the manufacturer. Special installations are sold in car dealerships.
We can put an end to this. We figured out what it is - cruise control in a car. Technology is useful in a number of cases, but you should not get carried away with it, since the driver must not lose concentration on the road.
Cruise control on a manual may seem like something fantastic to many, but if you try, you can install such an additional function on your own car. The only thing you should think about right away is whether or not you need cruise control on your car? After all, although in general this additional function greatly simplifies the process of driving a car, it also has its drawbacks.
Is it possible to install cruise control on a manual transmission: let’s look at the technical nuances. Will cruise control work fully on a manual transmission? The process of connecting cruise control to a manual transmission when it is not provided by the manufacturer. What you will need for installation Installation process Is it worth using cruise control on a car: advantages and disadvantages of the function.
Is it possible to install cruise control on a manual transmission: let’s look at the technical nuances.
Those car enthusiasts who are wondering whether there is cruise control on a manual transmission have most likely encountered this function only on cars with an automatic transmission. Indeed, this additional function is mainly used only on cars with automatic transmission, which normally have the ability to install it.
In this case, the procedure for connecting the device will be practically no difficulty, since the car owner will only have to install it in the place provided by the manufacturer.
As for cars operating on a manual transmission and on which the possibility of installing cruise control was not provided, then a universal device can be manually installed on them.
IMPORTANT! When purchasing cruise control for a car with a manual transmission, give preference to German manufacturers whose devices are highly reliable. This will allow you to avoid unexpected breakdowns of the cruise control due to overloads, which may occur due to incomplete compatibility with the car.
Technically, a similar procedure involves the additional installation of a bracket and an additional cable to the accelerator pedal, with the help of which it will be possible to control the speed of the car. Cruise control on the mechanics also involves installing a device control button at the bottom of the deflector.
However, often this button turns off after each press on the pedal (for example, when overtaking), which is why you have to activate the cruise control again.
Will cruise control work fully on a manual transmission?
The operation of cruise control on a manual transmission is practically no different from its operation when installed on a car with an automatic transmission.
However, in this case, there may also be one drawback: when trying to go uphill with cruise control turned on, the driver will not be able to automatically switch to a lower gear.
Because of this, if the driver is driving in 5th gear of a manual transmission, then without additional pressing of the gas pedal he is unlikely to be able to completely overcome the entire climb.
In such a situation, another feature of cruise control appears - if the car’s speed decreases (which happens when it is impossible to drive onto a slope), the device automatically turns off at 40 km/h, so the driver in any case will have to resort to mechanical control of the gas pedal.
IT IS IMPORTANT! If there is a RES button on the cruise control device, you can reset the speed by pressing it twice. If it is absent, you can reduce the speed by pressing the gas pedal and fixing the new speed using the cruise control start button.
The process of connecting cruise control to a manual transmission when it is not provided by the manufacturer.
Before proceeding with the installation of cruise control, the car owner must make sure that all technical components of his “iron horse” are in working order, and also install good tires on the car. This is due to the fact that in the presence of such malfunctions it is very dangerous to allow the car to drive under automatic control. If everything is in order, the driver will not endanger himself by driving on cruise control.
What you will need for installation
To complete the work, it is important to prepare in advance:
curved screwdriver;
scissors or an awl (the main thing is that they are very sharp);
nut head;
wrench;
a set of self-tapping screws (screws can also be used);
a cable for connecting to the accelerator (it can also be included with the device);
universal cruise control.
IMPORTANT! If your car has an accelerator pedal position sensor, then you will need to purchase an additional bracket for it, which you will also have to install yourself.
Installation process
In general, the entire work of installing cruise control on the mechanics will take you no more than an hour, however, you should set aside time to check the operation, as well as eliminate possible malfunctions. In general, the work consists of the following sequential actions:
Choosing a location for the new device. Often, car enthusiasts attach it near the fuel filter, which also allows you to connect the cruise control to the brake hose. You can choose another place for it, the main thing is that it is dry, and the cable from the accelerator can be freely connected to it (if there are strong bends in the cable, you will not be able to control the speed).
IMPORTANT! If you cannot run the cable from the accelerator in such a way that there are no bends in it, you can use a regular fishing reel, along which it will bend freely without breaking or damaging other mechanisms of the car.
We connect the second cable to the accelerator, but do not rush to cut it. First, install the bracket on the gas pedal position control sensor, and only then measure the required length of the cable and cut it. After this, the second end of the cable can be connected to the cruise control device.
To connect cruise control to a car, you must first find the tachometer connection wires, to which you need to connect the new device. The green wire that comes from the cruise control control unit must be connected to the tachometer wire. The red wire of the device is intended for connection to the brake lights.
Install the cruise control activation/deactivation button. To connect it, we connect the gray double wire. For full operation of the button and device, be sure to stretch the ground that runs along the black wire.
The cruise control control knob must be installed on the steering wheel of the car, for which it will have to be disassembled. If your car has airbags, they will also have to be removed for a while. We install the handle on the steering wheel and put it back together, not forgetting about the airbags.
We check the operation of the cruise control. To do this, we recommend that you drive along an empty road where there is no traffic. It is rational to do a test activation of the device at low speed (but above 40 km/h), while being prepared for the need to control the accelerator pedal if the device suddenly does not work.
Is it worth using cruise control on a car: advantages and disadvantages of the function.
The principle of operation of the cruise control function is that the device system automatically maintains the speed set by the driver, without requiring mechanical action of the foot on the gas pedal.
To activate cruise control, the driver just needs to press a button on the device, and immediately after that he can take his foot off the pedal and enjoy the car’s smooth speed, which will not change even if the road terrain changes.
But this does not mean that the driver will not be able to use the pedals when overtaking or stopping is necessary. All this is quite possible, and even more - after forced acceleration or braking, the car will still return to the same speed that was set on the cruise control.
THIS IS INTERESTING! Modern cruise control systems are equipped with more than one function on/off button. In addition to it, a SET button can be installed, pressing it in pairs will allow the driver to double the speed of the car as quickly as possible, without touching the gas pedal with his foot.
In general, the advantages of this additional function on a car with a manual transmission include the ability to relieve stress from the leg during a long trip that does not require dynamic control of the car. Thus, when driving out onto a long and unloaded highway, the driver really gets the opportunity to rest.
However, the operation of manual cruise control is rational only if the car owner constantly travels out of town onto uncrowded roads. In urban conditions, there is practically no point in installing cruise control, since the driver will constantly press the pedals with his feet.
We hope you were able to answer the question for yourself whether it is worth installing this additional function on your car, and you can clearly explain to others what cruise control is on a manual and how to install it.
The Euro 2012 Championship left us with several good “autobahns”, on which cruise control should theoretically be in demand. But how convenient is such a “device”? We looked for the answer to this question on the Kyiv-Lviv highway in a test Renault Megane.
To test the effectiveness of cruise control, the Kyiv - Lviv route was not chosen by chance. The fact is that on the four-lane section Kyiv - Zhitomir there are no settlements with a speed limit of 60 km/h, between Zhitomir and Rivne there are villages with speed limits and traffic lights, and from Rivne to Lviv there are many two-lane sections with dense traffic and speed limits. That is, all the conditions to understand where you can completely trust the cruise control and relax a little, and where you need to be on guard or, perhaps, not activate this assistant at all.
.jpg) |
Free route
So, free route. This is the best option for using cruise control. The only negative is that boredom overcomes very quickly, which can imperceptibly induce a sleepy state, or a desire arises to find a related activity. It is these two factors that are the causes of a significant part of accidents on European autobahns, which, in fact, led to the emergence of active cruise control systems. Such a system monitors the situation in front of the car and, if there is danger, warns the driver or brakes independently. Of course, automatic systems are not yet common among us, so it is necessary to set yourself up for an active state. If this fails, turn off the cruise control and control the speed limit yourself. Exercising your legs will cause your blood to circulate better, which will reduce the likelihood of drowsiness. Talking with a passenger or eating food - for example, candy, sweet straws, chips, dried squid or anchovies, etc. - can also save you from such trouble while driving.
Busy track
With cruise control turned on, you should always be on alert on such roads so that in case of danger from neighbors downstream, you can lift your foot off the floor in time and press the brake pedal. If a car with a lower speed changes into your lane in front far enough from you, you can reduce your speed by pressing the “-” button without resorting to the brake pedal. But if the car changing lanes is not far from you, you need to slow down using the braking system, since the electronics react slowly and engine braking occurs with a delay. Well, if someone is supporting you from behind, you can accelerate as quickly as possible only with the help of the gas pedal. When you press the “+” button multiple times (one press - +2 km/h), dynamic acceleration begins with a delay and is not so active. It is also worth paying attention to the fact that with all these manipulations of the buttons, the driver is distracted from the road, because usually the legs are responsible for deceleration and acceleration, and the hands control the steering wheel. Therefore, with cruise control in dense and unstable traffic conditions, it is dangerous to functionally overload your hands.
.jpg) |
.jpg)
|
Renault models are convenient because, in addition to cruise control (photo on the left), there is a system for limiting the maximum speed (photo on the right). In the Megane III, these systems are activated by a single button on the console between the front seats. |
|
Settlements without restrictions
In these road conditions, regardless of traffic density, cruise control should be used with caution, since traffic speeds are high, and the likelihood of pedestrians, horse-drawn carriages or pets on the road is much greater than on the highway. The situation is aggravated by the fact that even despite the presence of separation barriers, fences and noise barriers along the highways, our compatriots manage to overcome these obstacles.
Settlements with restrictions
Cruise control paired with a limit of 60 km/h works perfectly. A low speed, even with a clearance of up to +20 km/h, eliminates surprises that could upset the balance of safety on the road - in the event of an obstacle, the time to stop at this speed will be quite enough even with cruise control turned on.
Verdict
The outcome of our trip was impressive on several levels. Firstly, during a one-day 1200-kilometer march to Lviv and back with one passenger, the average fuel consumption of the Renault Megane dCi (105 hp) at a speed limit of 120 km/h (on most highways) was 5.3 liters of diesel fuel per 100 km. And this is with the air conditioner on! Secondly, fatigue turned out to be much less than during normal driving, which is a plus for safety, and it’s easier to go to work the next day. Thirdly, transmission units operate under more even loads, which increases their service life. True, on mountain roads you should forget about cruise control even on an open road (especially with a manual transmission). Closed turns and different radii of the trajectory make driving at a constant speed impossible. Cruise control is dangerous on our roads even in winter, since suddenly appearing slippery areas require an instant response from the gas pedal, and in the push-button control mode it is almost impossible to control the torque transmitted to the wheels.
If there is no "cruise"
If your car does not have cruise control, it can be installed as an option. It will cost 1300-2500 UAH. The price depends on the type of car and cruise control (factory, non-original, with electronic or mechanical gas pedals). If your foreign car is offered with this system, then installing it is very simple.
Yuri Datsyk
Photo by Andrey Yatsulyak
If you find an error, please highlight a piece of text and click Ctrl+Enter.
Long trips behind the wheel can be quite tiring for drivers. A monotonous position of the legs can lead to muscle pain and sometimes cramps. You can reduce the load on your legs and give yourself a break from the pedals using the popular option – cruise control.
Automakers mainly provide their cars with this system when equipped with automatic transmissions. However, it is not uncommon to find cruise control on a manual transmission; you will learn from the article what this gives the driver.
The system automatically participates in ensuring the vehicle maintains a constant speed while driving. The set speed is maintained until the driver independently turns it off. This mode is most popular outside the city, since on this section of the road it is possible to make longer journeys at a constant speed.
Before using cruise control, you need to know that it has several levels of dependence on the car’s on-board computer. When it is running, other systems, such as ESP or ABS, must be in good condition.
The mode is activated using the steering wheel paddle shifter or buttons on the multifunction steering wheel. To start, just use the “on/off” button. On certain sections of the road, the driver, without leaving the cruise control mode, has the opportunity to add gas without pressing the accelerator pedal with his foot. This function is also carried out using a lever or buttons on the steering wheel.
To add speed, the driver presses the button or lever with the “+” sign; the speed decrease is done in the opposite direction to the “-” sign.
You need to know that if the driver presses the brake or gas pedal while the cruise mode is on, the system will automatically switch to manual control, disabling cruise control.
Information content is provided using a special light indicator on the car panel. If the light with the corresponding image is on, then the cruise control is on.
Using the system levers, you can adjust the desired speed of the car. It is stored in the memory of the car computer. When leaving this mode, and then entering again, the driver activates the last recorded speed of the car.
Multifunction steering wheel with cruise control
As a rule, moving the lever towards “plus” or “minus” adds 1-2 km/h to the car’s speed. The minimum possible speed for setting the cruise mode is 30 km/h.
If necessary, you can exit the mode by pressing the “on/off” button again. After this, the corresponding indicator on the panel should go out.
"Mechanics" and cruise
Most often, cars with automatic transmissions are equipped with this function, although you can independently install cruise control on a manual transmission if this option is not provided by the automaker. In this case, you will have to change gears yourself.
A specialized company will also help you with tuning to install the cruise. Some organizations have universal systems prepared for installation. It is also possible to independently purchase electrical equipment. In this case, the car owner selects the most comfortable option for his vehicle, taking into account ergonomic features.
Let's explain how cruise control works on a manual, because there is some difference here from working on an automatic. When you press the clutch or brake pedal, it switches off automatically. The driver must shift the transmission to the desired gear and then reactivate the cruise control if necessary. Also, the shutdown is performed when the ignition is turned off, as is the speed settings reset.
Self-installation of cruise control
Installation is carried out on the steering wheel. To do this, a three-position button or lever is installed to provide control. They make it possible to customize the system, but you need free access to work with them. An on/off element is also mounted.
Cruise control installation kit
All wires are hidden under the casing and are routed to the electronic control unit. Signals are sent to operate the throttle valve. This can only be done on machines equipped with electronic damper control. The installation procedure takes 1-1.5 hours.
In some cases, possible side complications are problems with the central locking. There is no key adaptation. To resume this function, you will need to contact the official service, since the issue cannot be resolved on your own.
Adaptive Cruise Control System
The most progressive service for cruise control is its adaptive version. It allows you to control the speed limit of the vehicle in front, and based on the data received, the speed parameters of your own car are adjusted. Such services are usually called active, in contrast to classic passive ones.
Adaptive cruise control
The ability to maintain a safe speed limit and a sufficient interval between the front cars is ensured by built-in small radars and an additional digital signal processor.
Modern service is capable of operating at speeds of 30-200 km/h. They are already equipped with certain middle-class and premium segment models. In some cases, such systems monitor not only the nearest vehicle, but also take into account road markings, ensuring movement in the required lane.
When the car begins to approach the front car, a signal is sent to the driver about a change in road conditions. Such actions help to quickly respond to a possible obstacle. More advanced cruise controls independently perform maneuvers involving braking or other actions on the car. Such services provide drivers and passengers with increased safety conditions.
Conclusion
With cruise control, it is easier for the driver to control the car, both with an automatic transmission and a manual transmission. You can install this system yourself if you have an electronic control unit. Modern cruise control improves safety on the road.
Cruise control is a special device that ensures the convenience of long trips, and short ones too. Thanks to it, the car maintains the same speed regardless of the quality of the road, and the driver doesn’t even need to pay special attention to it. In cities, due to the variable speed of cars, cruise control is, in general, useless. It can be very useful when traveling out of town or between cities. And in order for cruise control to be in demand and its importance to be appreciated, you need to travel a long distance. Of course, such a system is most important in countries like America - where the roads are long and of high quality.
When buying a used car, even a very luxurious one, you may not have information about all its functions. This is because when driving a car there is enough information about its main indicators, or because the documents for it are incomplete/lost.
Well, many people simply stop paying attention to the key device in the car steering wheel, after making a number of unsuccessful attempts to turn it on.
What does cruise control consist of, what are the principles of its operation?
Nowadays there are passive as well as adaptive cruise control systems. Passive ones consist of the following: control keys, auto controller, servo drive, as well as solenoid valves so that it can be controlled, and a drive for the throttle valve.
The manifold controls the servo valves, responding to differences in actual and target speeds. The servo drive uses the resulting vacuum, sending a signal from its membrane that controls the throttle valve, thereby correcting the fuel supply. This is how the set speed of the car is maintained regardless of changes in the route - descent or ascent.
For the sake of safety, the system is inactive if you drive slower than forty km/h, and cannot be turned on forcibly, and when you press the brake, it turns off.
Using and controlling cruise control
The location for the cruise control remote is either the multifunction lever, the middle of the steering wheel, or the front panel. In most cases it is marked "CRUISE".
You can control it using the buttons on the steering wheel: these are On, as well as Off (on and off), Coast (lower), Resume (restore), Set\Accel (set/increase). In addition to them, there is also a brake pedal - as soon as you press it, the system turns off.
Let's explain:
- The Off button turns the system off;
- On – turns it on. When you press here, the cruise control becomes active, but to set the required speed, you must first dial it on the accelerator, and then press Set, and then the car will go at the set speed, and “CRUISE ENGAGED” will light up on the control panel;
- By first pressing Set\Accel you will “remember” the current speed, by the next pressing you will increase it by two km/h;
- Having slowed down, you can quickly restore the speed to the “memorized” one by simply clicking on Resume;
- To reduce it, you need to hold down Coast.
There are two ways to shut down the system:
- Press the brake, and after turning it on again you will have to pick up the desired speed again;
- Press Off, then the programmed speed remains in the cruise control memory;
If the system is turned on, it is not at all necessary to keep your foot on the gas pedal.
Active cruise control - what is it?
Automotive companies are now developing adaptive cruise control that also monitors the speed of vehicles ahead, so they can change the speed of your car to maintain a safe distance. And the one that currently exists is called passive.
Here, for example, is how it works on a Mercedes car. You're tailgating another car and your cruise control is on. The system, using a video camera, reads the number plate of the car in front, and yours will follow it on its own until it changes lanes or the route looks like a mountain serpentine.
And when the cars have separated a distance that the system deems safe, your car will return to the speed you set.
This type can be used at thirty to two hundred km/h. During its operation, do not let go of the steering wheel for the device to work. There is also another type of adaptive cruise control: the car monitors the road markings while following the lane, instead of looking for a passing car.
When the car in front slows down, cruise control signals yours to slow down too. And when the highway is empty, the system signals that the speed should be restored.
Active cruise control is needed to help the driver prevent accidents that occur when the driver collides with the vehicle ahead. In cases where it has too little time to slow down, it signals the driver to apply the brakes or turn to the side. Well, more complex systems can stop the car themselves.
Systems equipped with lasers are less expensive than radar systems, but have a downside. In bad weather they do not notice obstacles. In addition, they don’t see dirty cars at all. Well, executive cars and very expensive sports cars are equipped with radar.
But even active cruise control can make mistakes, so it also does not eliminate the need to pay attention on the road.
If the system is active, the engine operates in the most economical mode.
How to use cruise control correctly?
With a lot of ups and downs on the road, it can be quite difficult to drive a car on it if it has cruise control. This can be influenced by the following: the steepness of the route, as well as the descents and ascents on it, the programmed speed.
If you go up, the car may slow down. If you are going down a steep descent, there may not be enough engine braking; sometimes you have to press the brake pedal, which will definitely disappoint you in cruise control.
WARNING: Never use cruise control if the road is wet, slippery or icy! Otherwise you may create an accident. Also, you should never turn it on in difficult road conditions, such as, for example: drizzle, precipitation, night, fog.
What else do those who use cruise control need to know?
How to check an inactive system
If the activated cruise control on your car does not function or works poorly, you must first check if there are any problems with it. In this case, you need to act like this:
- Turn on the ignition;
- Press the ON button, which is located on the cruise control remote control. Then the CRUISE ENGAGED indicator light will light up. If for any reason it burns out, you need to insert a new, working one in its place;
- Press and hold Resume, releasing after three seconds;
- Then the light will first flash for three seconds and go out for two. Then, if there are problems, the light will show you the codes of the detected errors. And in the absence of these same problems, you need to reset the self-diagnosis mode. This is done this way:
- Pick up speed sixteen km/h;
- Disable cruise control by pressing the OFF button;
- Make sure that the indicator light no longer flashes.
- How can I read the error codes displayed by the indicator?
When reading error codes, you must remember the following:
- The codes are separated by a long pause;
- The numbers in the two-number codes are separated by a short pause.
For example: code 12 is indicated by a long flash, followed by first a short pause, and then a pair of short flashes.
How to respond to indicator signals that mean certain error codes:
Code 01
Here you should inspect the wiring that connects the system control panel, check the operation of the brake light switch, and also how well the system brake pressure sensor functions.
Code 05
In this case, you should check the fuse, as well as the wiring that connects the cruise control to the fuse.
Code 07
It is necessary to check the brake light switch, as well as the sensor that determines whether the system brake is pressed.
Code 11
As you understand, cruise control is an extremely useful thing, helping the driver not to get too tired on the road and pay more attention to the road situation itself. It especially helps on the track. Use this system, if you have it, it will make your life much easier, especially since there is nothing more difficult to use.
It is necessary to check the system switch, as in the case of error code 12.
Video
