Windows 7 disk management program. Hard disk partitioning program

Nowadays, many modern PC users have no idea how often any program for formatting a hard drive has helped in the past. .

After all, hard drives had to be formatted regularly.

This is all due to the imperfection of software products - both those that were used for basic user purposes and those that were used to perform maintenance operations on installed systems.

Background

Another aspect of the need for the once frequent use of programs to format hard drives is problems with the hardware. Small media volume, frequent hardware errors and the like.

But oddly enough, over time, the need to format disks still remained, even with the advent of modern solid-state drives. At the same time, the formatting operation has ceased to be an everyday norm, and if it is necessary to format a hard drive, many users are at a loss as to how and in what way it can be done.

Fortunately, over time, both the quality of software products designed for formatting hard drives and their number have increased noticeably. And now the user is not limited to built-in system utilities, but has access not just to third-party software products, but to entire sets of software tools that allow you to perform not only formatting, but also several other useful operations, in particular, improving the condition of the hard drive and the lifespan its operation.

Some of these tools are classified as shareware, some come with a free license, and the rest are only available upon purchase. Each of them has its own advantages and we propose to consider several of the most commonly used and popular tools with sufficient functionality.

Paragon Partition Manager Free Edition

A program for formatting a hard drive called Paragon Partition Manager Free Edition stands out from other similar software products in its ability to perform operations on virtual storage media. In addition, for those who still cannot give up using Windows XP, it will provide the ability to support high-capacity disks of the order of 2 TB or more. But it also works on modern Windows 7 and 8 operating systems.

An additional advantage of this complex is its support for multi-boot management functions. This option will be useful for those who use several operating systems in test mode or simply require their parallel use.

The program interface is quite simple and understandable, and in some cases it is simply irreplaceable. An example of this is the function of merging partitions without losing data, which is especially important when formatting partitions. In this case, the user is given the opportunity to even convert partitions.

As for file systems, the number of them supported is quite large. They can be converted from one to another using this program, in particular, NTFS to HFS.

Among other functionality, there is copying and restoring disks, merging them, moving them and resizing them. And all this in the presence of a Russified shell.

Some may find the defragmentation function superfluous, but absolutely everyone will like protection against system failures and detection of bad sectors.

Rice. 1 – Paragon Partition Manager window fragment

EASEUS Partition Master

This program for formatting a hard drive has the advantage of having several versions with different functionality. Some of them are free, but the Home Edition and Master Free versions deserve special attention from ordinary users.

The program has excellent functionality, accessible through the Russian-language software shell. It can run under the Windows operating system family, in particular, versions 7, 8 and 10, both 32-bit and 64-bit, and some versions allow you to work through Linux.

The software product provides work with a wide range of heterogeneous drives, the most important of which are:

HDDs;
SSD solid state drives;
USB flash drives;
memory cards in various designs.

You can not only format them, but also create or change sections, for example, merging, deleting, copying and resizing.

The program has access to work with RAID arrays and provides user interaction with MBR and GPT. Some operations can be performed using built-in wizards, which greatly facilitates the user’s work.

It is worth paying attention to the fact that each version of the product has its own restrictions, in particular, on the maximum storage size. For example, in the Home Edition it is 8 TB, and in Master Free it is only 4 TB. The user is also recommended to pay attention to the installation process, since unnecessary utilities can be installed along the way.

Rice. 2 – EASEUS Partition Master window fragment

Aomei Partition Assistant

A program for formatting a hard drive called Aomei Partition Assistant is a product that is distributed free of charge, but has decent functionality. It provides a number of functions that are not available in other free products and therefore belongs to a completely different class.

This software package, like the previous product, has a Russian-language shell and supports modern operating systems of the Windows and Linux families and, accordingly, file systems running under their control: FAT 12/16/32, NTFS, Ext2/3/4, exFAT/ReFS.

In parallel with work on physical media, the program also performs operations on virtual disks.

As for the special functionality, it is implemented in the form of access to disks invisible to other software. The program allows you to check them, test them and a number of other useful operations. All this against the backdrop of minimum system requirements, ranging from the processor version to the amount of available disk memory.

This software product is able to work even under such conditions when the device has 128 disks installed and the volume size is 16 TB. It is also one of the few products that can work with SSHD, flash drives and flash cards. Is it worth mentioning that it supports UEFI Boot, and all operations performed are performed without damaging user information, according to the creators?

Rice. 3 – Aomei Partition Assistant Window

MiniTool Partition Wizard

This program for formatting a hard drive is more modest, but much more popular, not only in the domestic space, but throughout the world. It is free and provides interaction under operating systems of the Windows family, including the latest versions of various bits, while also processing EXT disk partitions, as well as Linux Swap.

The software interface has a Russified shell and provides work with partitions with a capacity of more than 2 TB. It is quite simple and will be understandable even for a novice user. The functionality of the interface is quite wide and even includes the new-fangled migration from HDD to SSD.

The software product also performs a number of basic operations with disks and their partitions, including their cloning, creation and modification. An additional operation can be considered the conversion of FAT/FAT32 file systems to NTFS while maintaining the integrity of user data, which is complemented by the functionality of backing up stored information and a data recovery utility after failures. If desired, the user can test their disks by testing their performance.

Like some of the programs described above, this one can convert disks from MBR to GPT, and this is important when a frequently used system partition is worn out. In parallel with this, it is possible to assign active sections and interact with them.

Rice. 4 – MiniTool Partition Wizard Window

HDD Low Level Format Tool

This hard drive formatting program falls into a different category than the software tools discussed above. Therefore, it deserves special attention. This is not a large software package with wide functionality, but a small program that only has the ability to low-level formatting in its set of functions.

This option provides, with the given settings, the ability to restore the functionality of storage media. Moreover, this functionality applies to both hard drives and flash drives. The only problem for the user in this case is the complete destruction of the data on the media without the possibility of further recovery.

Unfortunately, there are no other operations that this product can perform with media.

Rice. 5 – HDD Low Level Format Tool window

Acronis Disk Director

This program for formatting a hard drive is also quite interesting. Its peculiarity is that it can be launched from any media. So, you can install it on a boot disk or flash drive and even without a full-fledged operating system be able to work with disk partitions.

This functionality is especially important in emergency situations, when it is more important for the user to restore the system’s functionality, and not just create an additional partition for more convenient storage of data or installation of a game. The program's functionality is suitable for working with disks running both Windows and Linux. However, this product has one significant drawback, which is noticeable when compared with the above programs - its cost.

In fact, this application belongs to the category of shareware products. After the specified trial period has expired, the user is offered two options - purchase a license or remove the software product. Therefore, it can be safely used and compared with other programs on a free basis, but for a limited period.

Otherwise, this is a full-fledged tool for working with disks and their partitions with wide functionality. It includes all the basic operations for working with partitions, including formatting, and also allows the PC owner to view the information stored on these partitions in a general way.

Rice. 6 – Acronis Disk Director window

Standard Windows OS Tools

When describing programs for formatting disks, one cannot fail to mention standard operating system tools that are available to users without downloading third-party software products. This can be done using the example of operating systems of the Windows family. A special feature of these systems is that they have several tools for working with hard drives and their partitions.

The first tool is quite simple and this utility is available to the user from the Explorer program. In order to use it, you can call up the context menu for the logical partition of the hard drive, and select “Format” from it. After this, a form will become available in which you can specify the desired parameters of the formatting operation.

This functionality will be available for all logical disk partitions, with the exception of the active system disk. In this case, you need to use a slightly different tool, accessible exclusively from the command line. Working with it requires special skills that are only available to experienced users.

Important! To have access to them, you need to have a boot disk, as well as settings in the BIOS that force the PC to boot from removable media, and not from the hard drive, in order to provide the functionality the system needs. This is provided by a small utility called diskpart. But its main problem is that the user does not receive high-quality visualization of the actions being performed, and any error in their execution can cost the functionality of the system.

This state of affairs forces users to resort to using third-party software products.

Rice. 7 – Formatting utility window

Formatting your hard drive before installing Windows

In the video I will show you how to format a hard drive. This may come in handy when you reinstall the Windows operating system.

The reasons why you need to divide your hard drive into several partitions are different for everyone. For some, this is an opportunity to systematize the necessary information and store it correctly; someone using several partitions uses several operating systems on their computer or laptop. Finally, if the hard drive is divided into several parts, then separately.

Standard PC equipment: the simpler the better

This program is rightfully considered one of the best or even the best hard drive partitioning program.

This is the simplest program that will help you effectively manage multiple systems and different programs.

Its main advantages are eliminating partition errors, converting file systems and protecting data. Another advantage is that this utility is very popular, because there is a lot of reference information on it on the Internet.

2. Disk management in Windows

Any version of Windows has the Disk Management function: this is the simplest, most accessible and quite effective tool that allows you to change partitions.

Each version of Windows OS has its own differences, but in the most popular ones (Windows Vista, Windows 7 and 8) there are no fundamental differences. Let's take a closer look at how to partition a Windows hard drive using this utility.

The program opens through the Start menu, and in the “Disk Management” item, even a novice user with the help of three main points (Expand, Shrink and Delete volume) performs all the necessary actions in real time. No special knowledge is required for this - just give affirmative or negative answers and click the desired menu items.

There is only one drawback of the standard program - there are risks of failures that lead to the loss of certain sections. A risk exists if there is a mass of unnecessary programs on the disk, or when trying to partition the partition of the hard drive in which Windows is running: the processor does not always react unambiguously to an attempt to “experiment” with the system partition.

Free software for everyone

Two programs that can be downloaded absolutely free from the Internet - EaseUS Partition Master Home Edition and Paragon Partition Manager 11 Free - are also easy to learn and use, but require certain knowledge.

1. EaseUS Partition Master Home Edition

The program helps not only to partition a hard drive, but also to create, copy, resize or completely delete partitions; and also restore deleted partitions.

The disadvantage that affects the popularity of the program is that it is only available in English. But if you know English, you can appreciate the excellent functionality and predictability of the program, stability of operation and the ability to carry out all procedures in virtual mode - at any time you can correct a settings error, cancel the disk partition procedure and restore the original data.

2. Paragon Partition Manager 11 Free

The program again has an English-language interface, but for a beginner it is more interesting than the previous one - the main windows are quite clear and make it easier to navigate the functions. The disadvantages of the program include low speed and unpredictability.

If funds allow, you can purchase a Russian-language version of this program for money, but it also retains the main disadvantages of the English-language product.

Programs for advanced users

These programs have advanced functionality - support for various disks and flash drives, the ability to convert file systems, create bootable media and much more. The fundamental differences lie in speed, functionality and special features.

5. Active@ Partition Manager

This program is a free manager that simplifies working with logical drives: a system reboot is not required when creating, formatting or deleting disk partitions.

Even if you accidentally delete important partition data, the program will help you restore it!

But the inability to change disk sizes (the partition must first be deleted and then another created in the same place) leaves no chance of recovering lost information.

6. MiniTool Partition Wizard Home Edition

Experienced users can use the equally simple and accessible MiniTool Partition Wizard Home Edition manager. The most important advantage of the program is the ability to work with both a separate hard drive and RAID arrays created on the basis of two or more disks.

Often the standard tools offered by the system are not enough to work with the hard drive. And therefore we have to resort to more effective solutions that allow us to obtain detailed information about the HDD and its partitions. The solutions discussed in this article will allow you to familiarize yourself with the operations applied to the drive and its volumes.

Thanks to its tools, AOMEI Partition Assistant is one of the best programs of its kind. Wide functionality will allow you to effectively configure hard disk volumes. In addition, the program makes it possible to check a specific section for errors. One of the interesting features is the ability to transfer the OS with all installed software to another hard drive or SSD.

Writing an image file to a USB device is also supported. The interface is endowed with a pleasant graphical shell. Despite the large number of useful functions, the program is available for free use, which makes it even more popular. At the same time, it is possible to download the Russian version.

MiniTool Partition Wizard

This software has powerful functionality that allows you to merge, split, copy partitions, and a number of other functions. MiniTool Partition Wizard is completely free and available for non-commercial use only. The program provides the ability to change the disk label, and when creating a partition, the cluster size.

The surface test operation allows you to detect bad sectors on the HDD. The ability to convert is limited to only two formats: FAT and NTFS. All tools for working with disk volumes are placed in a very convenient way, so even an inexperienced user will not get confused.

EaseUS Partition Master

A program that opens up many possibilities when working with a hard drive. Among the main ones: disk cloning and importing the OS from HDD to SSD or vice versa. Partition Master allows you to copy an entire partition - this function is suitable if you need to create a backup copy of one partition to another.

The program has a convenient interface in which all operations are located in the left block - this allows you to quickly find the function you need. The peculiarity of EaseUS Partition Master is that it can be used to hide a specific volume by deleting a letter on it. Creating a bootable OS is another interesting and useful tool.

Eassos PartitionGuru

Convenience of working with Eassos PartitionGuru is achieved primarily due to its simple design. All tools are located on the top panel. A distinctive feature is the ability to build a virtual RAID array. To do this, the user just needs to connect drives to the PC, from which the program itself will construct a RAID.

The available sector editor allows you to search for the desired sectors, and hexadecimal values are displayed in the right block of the panel. Unfortunately, the software is supplied in an English trial version.

Macrorit Disk Partition Expert

A pleasant interface displays functionality, which is divided into sections. The program allows you to scan your PC for bad sectors, and you can configure the disk space to be scanned. Conversion of NTFS and FAT formats is available.

Macrorit Disk Partition Expert is free to use, but only in the English version. The software is suitable for people who need to quickly set up a hard drive, but for more efficient work it is recommended to use analogues.

WonderShare Disk Manager

A program for performing various operations with a hard drive, allowing high-quality data recovery. Compared to other similar software, Macrorit Disk Partition Expert allows you to deeply scan partitions for lost information.

You can trim and merge hard disk volumes without losing files stored on it. Other tools will allow you to hide the partition if necessary or convert the file system.

Acronis Disk Director

Acronis Disk Director is one of the most powerful programs with a set of functions and operations for managing hard disk partitions and more. Thanks to the capabilities of this software from Acronis, users can recover lost or deleted data. Among other things, it is possible to defragment the volume and also check it for file system errors.

Using mirror technology allows you to save a backup copy of a partition selected by the user. Acronis Disk Director offers the use of a disk editor, which makes it possible to find a lost cluster, taking into account the fact that the execution environment for this operation displays hexadecimal values. The program can be safely used to carry out the most efficient work with the HDD.

Partition Magic

A program that allows you to perform basic operations with a hard drive. The interface is largely reminiscent of the standard Windows Explorer application. At the same time, among the tools located in the graphical shell, it is easy to find what you need. The advantageous feature of Partition Magic is that it allows you to select multiple active partitions, each of which has its own separate OS.

You can also use file system conversion services, two of which are supported: NTFS and FAT. You can resize the volume and merge partitions without losing data.

Paragon Partition Manager

Paragon Partition Manager pleases users with an interesting set of functions and purposes for their use. One of them is connecting a virtual disk image. Among them, image files of VirtualBox, VMware and other virtual machines are supported.

A noteworthy feature is that it allows you to convert HFS+ file system formats to NTFS and vice versa. Other operations are basic for partitions: trimming and expanding. A large number of settings provided by the program will allow you to customize all the functionality to your liking.

The software solutions considered have unique potential, each in its own way. The powerful tools of the developed software make it possible to save disk space and prolong the life of the hard drive. And the function of checking the HDD for errors allows you to prevent critical errors in the operation of the drive.

The performance and ease of use of the system depend on the condition of the hard drive. Cluttered media reduces performance, slows down the system and is more susceptible to errors and failures. Adequate disk management and the use of custom partitions improve its performance, increase comfort and have a positive impact on the security of data and equipment. There are many tools and programs for working with a hard drive. Some of them differ only in graphical interface and price.

Selecting a program for working with hard disk partitions.

GParted is an advanced program for working with hard disk partitions that does not interfere with the operating system. After downloading, the program is offered as an ISO disk image, which must be burned to a CD/DVD. After recording, restart your computer and select to run from CD/DVD. The program allows you to create, delete and resize an existing partition. A big advantage of the program is the ability to change the size of the partition on which the system is installed. The program supports most known file types, including fat16, fat32, ntfs, ext2, ext3 and ext4. Before any operations on partitions, it is recommended to first defragment them and back up the most important files. Resizing partitions can take anywhere from a few minutes to several hours.

How to use the program:

Back up your important files!
Download the GParted program and burn it to disk.
Insert the disc into the drive and restart the computer.
When the motherboard manufacturer splash screen appears, press the F8 key (sometimes it can be the F9, F10, F11, F12 key, depending on the manufacturer) and select boot from CD/DVD.
Once downloaded, select GParted Live from the list.
Click "Don't touch keymap".
Select a language (Russian – 24).
“Which mode do you prefer?” – 0 and confirm with ENTER.
A search will begin for all available hard drives and partitions that have already been created on them. This may take a few minutes.

If you need to repartition the disk, first delete any previously created partitions. To do this, delete them one by one (the “Delete” trash can icon). If you don't have any sections yet, skip this step.
In the list of partitions, click on the space with unallocated space. Then click on the white sheet icon (“New”).
In the window that opens, you need to set the parameters for the new partition: size, partition type (primary, extended or logical) and its file system, partition name. Then confirm adding the section with the “Add” button.
After creating the section, confirm the actions by selecting the green “tick” icon. The program will begin creating partitions. This may take a few minutes.
The next step is to close the main window and double click on the “Exit” icon.
Restart your computer.

After the reboot, the new disk partitions will be ready for use.

One of the most convenient programs for working with disks, EaseUS Partition Master, supports RAID devices. The application is equipped with a Wipe module, thanks to which the user can permanently erase files so that their recovery is impossible (especially useful before selling a hard drive). Each operation requires additional confirmation and comes first in the queue, so the risk of error is minimal. Let's see how to use this program to organize a disk that contains too many or too few partitions:

Download the program and run the installation.

IMPORTANT. During installation, do not download additional tools.

Once the application is installed, launch partition management to proceed to management.
Select the drive you want to format, right-click on it and select the “Erase data” option.
Set the number of times to repeat disk cleaning to 1, and click OK.

IMPORTANT. Formatting the drive means that all data will be deleted permanently.

The task will be added to the list of pending operations in the window on the left.
Next, select the “Create partition” option.
Then you need to set up a new partition, select its size, enter a name and select a letter. After entering all the data, click "OK".

You can create multiple partitions on a disk, but remember that if you create a partition on a USB drive, Windows will only be able to read the primary partition.

To complete all tasks in the Pending Operations list, simply click Apply Changes.

How to create a new partition:

Select the system partition.
The Actions panel displays the available functions.
If you are using a hard drive, we recommend defragmenting the partition first. Select Defragment, then click OK.
After defragmentation, select Resize/Move Partition.

In the next window, use the pointer to drag the borders to the left - this will reduce the size of the system disk.

If you are performing SSD partitioning operations, check the "Optimize SSD" checkbox.
Click "OK" to confirm the operation.
In the Apply Changes window, click Yes. A message appears asking you to restart your computer. Click Yes. The disk will be partitioned and the computer will reboot.
Launch EaseUS again. Click on the free space and in the Actions panel, select Create Partitions.
If it is an SSD, then check the "Optimize SSD" checkbox. Click OK. The unallocated space will be formatted as a new disk.

Merging sections:

In EASEUS Partition Master, select the partition on drive C. In the Actions panel, select Merge Partitions.
Select the second section, it should be the adjacent section. Select the target drive from the list. Files from the second partition will be placed in a separate folder. Click OK, then Yes. Sections will be merged.

The program also has a diagnostic module that allows you to search for damaged sectors and manage the structure of the hard drive. An important feature is the pre-splitting before approving changes, which gives the user full control over the planned actions. The rest of the programs in the review work on the same principles as those described above.

One of the best programs for working with a hard drive, supporting hard drives with a capacity of more than 2 TB. Each partition can be archived as a backup, allowing you to restore data after a possible failure. The user can also change the file system from FAT to NTFS, and after each change in the size of the NFTS partition, there is no need to reboot the system. The application is equipped with interesting modules, including a disk map, which shows a graphical view of the partitions on the disk, Disk Surface Test, which offers basic disk diagnostics, and the Partition Surfece Test, which analyzes a specific partition.

Free utility for Windows 7 and later Microsoft operating systems. Created on the Visual Operating System (ViOpSys) environment and runs from a boot CD/DVD when the system starts. Allows you to create new sections, divide, move and delete existing ones and copy their contents. In addition, the user has modules for defragmenting and formatting partitions. The program has low system requirements, so it can be used on older hardware (Pentium-class x86 processor, 32 MB of RAM or 16 MB in text mode).

A powerful and functional disk and partition management tool, equipped with diagnostic and repair modules for working in Windows 10 and earlier versions. In addition to the basic functions of creating, copying and deleting partitions, you can back up and restore data lost due to, for example, a hard drive failure. The application is equipped with a “tomofinder” that allows you to find and restore deleted data. The program supports the most popular file systems, such as FAT12, FAT16, FAT32, NTFS, EXT2 and EXT3, as well as media with DE, SCSI, SATA interfaces. Allows you to manage virtual storage media and RAID. The built-in diagnostic module allows you to analyze the state of the disk, find and correct any errors (including restoring a damaged MBR).

A program designed to create copies of Windows system partitions. Allows you to quickly clone a partition to a new drive, so you can work on new media without having to go through the operating system installation process. When moving a partition, you can change its size or leave it at its original size. The program supports files in FAT and NTFS, IDE, SATA, SCSII, USB and FIREWIRE interfaces.

An application designed to manage USB storage devices (cards, pendrives, external drives), supporting FAT16, FAT 32 and NTFS file systems. Allows you to create, copy and delete partitions, format memory and create bootable media, for example, with an operating system or another program. The program is equipped with a diagnostic module that checks the performance of the hard drive and the size of the media.

Allows you to analyze disk resources, provides detailed data about files and displays them in graphical form. For example, their size and location. The user can determine what data will be displayed and in what form. The application generates reports from collected data in HTML, ASCII and XML formats.

Conclusion

Thus, we introduced you to the best programs for working with hard drive partitions. You just need to try them and decide which one suits you best. And if after reading this article you still have questions, feel free to ask them in the comments.

The hard drive in your computer and the drive icon in the My Computer window are different concepts. For example, a computer may have one hard drive installed, while there may be several of them in “My Computer”. The reason for this strange discrepancy is that the hard drive can be divided into so-called partitions. This is called logical disk layout.

I will talk about why such markup is needed, how to do it correctly (and whether it should be done at all), and also tell you about free programs for such a delicate procedure.

Why do you need to partition your hard drive?

There are several reasons to partition a hard drive:

Partitions on a hard drive are primarily needed for proper storage of information. For example, some users prefer the following division: operating system and programs on one disk (usually C), documents - on the second ( D), photo archive on the third ( E) and so on. In this case, there may well be only one hard drive.
If you have one hard drive, but want to have two or more operating systems, you will have to divide the hard drive into partitions, since Windows and other operating systems can only be installed on different partitions or hard drives.
Manufacturers of laptops (and some computers from famous manufacturers such as Acer) have their own reason for dividing hard drive partitions: on a section that is visible as a disk C, Windows installed, second ( D) is completely empty, and the third (which is not visible in the “My Computer” window) stores a compressed copy of the partition C. This hidden partition of the hard drive is called recovery partition. If something happened to the operating system (“Windows crashed” - as some users like to say), then when you turn on the laptop, just press a key combination (see which one - see the instructions for the laptop) and a special program will clean the disk C, then unpacks the contents of the hidden partition there. As a result, the user will receive a laptop with the programs that were originally on it at the time of purchase in the store. Disk D however, it will not be changed. The conclusion suggests itself: if you store all documents on a laptop with such a recovery system not on drive C, A only on D, you can restore damaged Windows with a new one at any time, without losing your important data. By the way, any advanced user can make such a recovery system for themselves, but I’ll tell you about it some other time.
The Windows 7 and Windows 8 operating systems, when installed on a blank, “unpartitioned” hard drive, create a hidden partition of 100-350 megabytes in size. This small partition stores a bootloader designed, oddly enough, to boot Windows. This partition will not exist or its contents will be damaged - and the computer will not start the operating system, displaying the message “Boot fail”, “Cannot find boot device”, “Boot error” or similar on a black screen, the meaning of which is the same - the boot disk with operating system. Actually, the bootloader can be stored on disk C:, and/or in hidden sectors of the hard drive (outside partitions), but the developers decided in Windows 7/8 to use a separate hidden partition in order to somehow protect the boot loader from damage by other programs, viruses or the user.
There are other reasons for partitioning a hard drive. For example, for the GNU/Linux operating systems to work correctly, several sections must be created, but this is the topic of a separate article; we will not consider them here.

So, The main reasons for partitioning a hard drive are: for the convenience of storing information, for installing several operating systems, for operating a recovery system, for storing the Windows 7/8 boot loader.

A little theory: file systems, partition types

Information about partitions (i.e. logical drives) is stored in a "partition table". Each logical drive can have its own file system. You can read more about all this in the Wikipedia articles: Disk partition, Logical disk, File system. A novice user only needs to know the bare minimum:

If you divide your hard drive into logical drives (partitions), Disk capacity will not increase- there’s simply nowhere to find free space! You can make partitions of any size, but in total they cannot be larger than the capacity of the real hard drive. Less please. Then you will have unallocated free space, not visible in My Computer, from which you can get one or more new partitions. This is a question I often get from newbies, so I put it first.
Exist primary (main) And extended (additional) sections. One hard drive cannot have more than four main partitions (see the links above for why this is so), so they came up with an extended partition - this is a primary partition that can include any number of partitions. As a result, thanks to the extended partition, the hard drive can have any number of partitions - tens, hundreds.
Each partition can have its own file system. At the moment, only NTFS can be used to install Windows Vista, 7 and 8, and the outdated Windows XP can be installed on disks with the FAT32 file system. However, I do not recommend doing this, as it imposes too many restrictions. Make all partitions in NTFS - everything will work as it should.
Any hard drive must be partitioned one way or another. In one or more logical drives - it's up to you. When purchased, the hard drive is usually already partitioned into one partition - this is what the manufacturer decided. If you are satisfied with this way of organizing information, leave it alone.
It is very undesirable to partition the disk in laptops - most of them have hidden recovery partitions that can be damaged (see point 3 of the previous chapter).
If you bought a 2 terabyte hard drive, but in “My Computer” it is “only” 1.86 terabytes (1860 gigabytes), then do not rush back to the store. It's all about how manufacturers and Windows calculate the volume. Read more about this in the Wikipedia article Hard Drive. The larger the size of the hard drive, the more clearly it is clear that there are fewer real gigabytes.
Sections can be delete, create, move(change their physical position on the disk), resize them, format them, convert them file systems on partitions from one to another. Moreover, many programs can do this while saving all the data. There are other operations, but novice users most often need the above.
If there is an error during the process of changing partitions (see point 7), information is almost always lost. Yes, it can be restored (or part of it) with special programs with the participation of specialists, but it is best to save all important information in advance on other drives (not logical drives, but real drives) or flash drives, so as not to pay money for data recovery.

Disk Management in Windows

Windows has a standard partition changer - " Disk management". Depending on the version of Windows, the capabilities of this program change slightly, but in general over the past years (if we talk about Windows Vista, 7, 8) there have been no major changes. Windows XP looks more modest in this regard - apart from formatting and changing the drive letter, there is little that can be done there.

As an example I’ll take “ Disk management» Windows 7. You can open this program in several ways:

The simplest one is to right-click on the line Computer on the menu Start- select an item Control- in a new window select Disk management.
Opening Control Panel - Administration - Computer management - Disk management.
Click Start - Execute(or the Win+R key combination) - enter in the window that opens diskmgmt.msc- press OK.

Disk management looks like that:

Here you can see both physical disks (including DVD drives, flash drives and other devices for storing information) and logical ones, i.e. virtual - hidden partition of the Windows 7 boot loader, disks C And D. The number of disks on your computer may vary.

Basic actions are available by right-clicking on the desired section:

The list of actions is quite meager:

Items Open, Conductor allow you to view the contents of disks
Make the section active- indicate on which disk (partition) the bootloader is located. In Windows 7 and 8, this is a system-reserved partition. You cannot make another partition active - the operating system will stop loading.
Change drive letter or drive path- you can change the drive letter displayed in the Computer window or display it as a folder. Yes, partitions can be displayed not only as disks, but also as folders on any disk.
Format- you can read about this in the Wikipedia Formatting article. The item opens a window with which you can start high-level formatting.
Extend volume- if there is space on the hard drive that is not marked as a partition, then you can expand the partition size using this free space.
Shrink Volume- this item allows you to reduce the size of the partition. The result will be the formation of unallocated space, which can be used to expand the volume of another section (see the previous paragraph).
Delete volume- delete the section. Don't click on an item without thoroughly considering the consequences. If you delete a partition, the information on it can only be saved with the help of special programs, and even then not always.
Properties- a properties window will open with information about the selected disk (partition).

Of course, this is not a complete list of possibilities. Disk Management. You can create dynamic disks, for example. However, this is of no use to novice users; this article is intended specifically for them.

So, to create, delete, resize partitions via Disk management, you only need three menu items: Expand Volume, Shrink Volume, Delete Volume.

All operations take place in real time, i.e. after clicking the desired item and answering the question in the affirmative - do we want to do this - the actual action occurs.

Do not forget that there is a risk of failure, due to which we could lose either one or all of the partitions. This applies primarily to computers with a large number of unnecessary programs - each of them may be the culprit in deleting all data. Moreover, the scenario is when you need to change the partition from which Windows is launched (usually this is the disk C), is the worst - most often users experience problems when they try to change the system partition.

To minimize the risk of failure, There are three methods:

Insert the hard drive into another computer and change partitions from it by running Disk management or any other program for changing partitions. Due to the fact that Windows will be launched from another drive, no programs will go onto the foreign drive, interfering with a critical operation.
Boot from a Live CD - the operating system and programs will be launched not from the hard drive, but from a CD or DVD, flash drive - again, nothing will interfere with changing partitions.
To change partitions, use a program that can work in Native mode. For example, disk check C always works in this mode - a black window with white text before loading the Desktop. In this mode, a minimum number of programs are launched and the risk of failure is minimal.

The third option is the simplest, because the user essentially does not need to do anything - just restart the computer and wait a few minutes. The following two review programs can do this.

A free hard drive partitioning program for home use.

By clicking on a section (it doesn’t matter - in the list at the top, on the picture below), you can see a menu (both a pop-up and in the left panel) with all the required actions:

Resize/Move partition- resize the partition and/or move its physical position on the disk. By the way, the official website says that EaseUS Partition Master version Home (free) does not support changing partitions. This is not true - everything works great.

Copy partition- copy the partition to another disk with all the information on it.

Merge partitions- merging two or more sections. Convenient if you need to save information on your hard drive, but reduce the number of partitions. Convert to logical/primary- conversion to logical (extended)/main (primary) partition.

Change label- change the disc label.

Change drive letter- change the drive letter.

Defragment- launch a standard Windows program to defragment the disk.

Check partition- checking the disk for errors using, again, a standard Windows program.

Hide partition- make sure that the partition is not visible in the “Computer” window.

Delete partition- deleting a section.

Format partition- partition formatting.

Wipe partition- clearing the contents of the section. All folders and files will be deleted, the partition will remain. Information deleted in this way cannot be restored.

Explore partition- view the contents of the section.

View properties- see how much space is occupied on the partition, what file system it has, and find out other technical information.

The list of actions changes depending on where you click. In the screenshot above, I clicked on the non-system section. By clicking on the system partition (where Windows is running), there will be no delete, hide, or cleanup options. If you click on the physical disk icon, the list of actions will be completely different:

I will list the points:

Copy disk- the contents of the entire disk are copied: partitions, information in them. To do this, you need a second disk of the same or larger capacity.

Upgrade disk- the function is primarily needed to transfer Windows to a new, larger hard drive. The partition is copied and increased in size in proportion to the size of the new hard drive.

Delete all partitions- delete all sections.

Wipe disk- the same as the previous paragraph, only with special deletion algorithms, making it impossible to restore the information.

Surface test- checking the disk surface (physical). Allows you to detect bad sectors (so-called “bads”, “bad blocks”).

View properties- display information about the disk.

Yes, knowledge of English is clearly required here, especially considering that almost every item opens a window with settings for the action being performed. After you have made the necessary manipulations, you need to apply the changes by pressing a button Apply(Apply):

Only then will the partition changes begin. This process may take some time - from a couple of minutes to several hours.

Depending on whether the system partition is affected or not, operations are carried out either immediately in the window, or you will need to restart the computer and start changing the partition in Native mode:

The program has so many functions that it is impossible to list them all. I recommend that you read the help for EaseUS Partition Master. It is in English, unfortunately, but you can use Google Translator. The translation is quite understandable.

Pros of EaseUS Partition Master Home Edition:

Lots of functions.
All actions are “virtual” until you click the Apply button. This means that you can cancel operations before this “point of no return” and try to do something else with the partitions. Or don’t do it at all if you change your mind.
Works stably and predictably. For example, during testing, while changing partitions, I started copying files to the partition that was to be changed. Result - a window appeared stating that it was not possible to lock the partition, all operations were interrupted, the data did not disappear anywhere.
The program is free for home use.

Cons of EaseUS Partition Master Home Edition:

The interface is in English only.
There are, perhaps, too many possibilities - this can confuse beginners.
A serious failure during the operation will lead to serious consequences.
For example, if you turn off the computer while changing a partition, the data on the partition will disappear. However, this is a minus of absolutely all programs for changing partitions.

Conclusion: the program is good. You can and should use it; there is no alternative among free programs.

Paragon Partition Manager 11 Free

Free program for changing partitions from a company based in Russia. Unfortunately, the program is in English. What made the developers take such a step is unclear. Moreover, the paid version of the program is Russian.

The main window of the program is no different from the window of the hero of the previous review, except that the buttons have changed their order:

Deserves special mention Express Mode(Simplified mode). By clicking on this button, we will get a window with a list of the most frequent actions:

One could say that this is an ideal mode for beginners, if not for one “but”: everything here is in English. Moreover, I had a suspicion that the English here was somehow incorrect, as if it was not a person who was translating, but a machine.

Pros of Paragon Partition Manager 11 Free:

Many windows are clear enough to understand the functions.
Some operations are carried out immediately in the program window, some (if required) in Native mode. That is, the program does everything to reduce the chance of data loss.
The program is free to use at home.

Cons of Paragon Partition Manager 11 Free:

English-language, and due to the strange construction of phrases it is quite difficult to understand.
The simplified Express Mode works exactly the opposite: firstly, the descriptions of operations and the operations themselves have more technical subtleties than is required; secondly, this mode is very capricious and does not really work, producing meaningless errors.
The program is too slow. For example, deleting a 38 GB hard drive partition took me about 5 minutes - quite long for such a simple operation.

Conclusion: The program works, but somehow it is unpredictable. I do not recommend using this program, fortunately there is an alternative in the form of EaseUS Partition Master Home.

Changing partitions during installation of Windows 7, 8, 10

This tool also deserves a mention.

Take any installation disk with Windows Vista, Windows 7, 8 or 10, start installing the disk, go to the partition selection and click Disk setup:

It seems that everything is simple: you need to click on a section in the list, then the action button. Unfortunately, there is little action here: deletion, formatting, partitioning and expansion.

You can, for example, delete a partition and, using the freed up space, increase the size of another partition or partitions (when selecting the desired partitions, you must press the Delete and Expand buttons in turn).

Alas, a very popular operation - reducing the size of partitions - is not here. You can delete the partition, then re-create a new one with a smaller partition, but, unfortunately, we will lose the data.

All operations take place in real time, i.e. after pressing the button the action occurs.

Result: editing partitions during Windows installation is an extremely primitive tool. It works, but performs only a limited list of actions, among which the only one that saves data is increasing (expanding) the size of the partition. If you need to install Windows and do not need to save data on partitions, then the tool will come in handy.

If you suddenly accidentally deleted a partition during Windows installation or through some program, do not despair - the partition recovery function is included in EaseUS Partition Master Home Edition.

In order to recover a deleted hard drive partition, don't touch the partitions, immediately boot into Windows (or insert the hard drive into another computer if you deleted the system partition and booting Windows is impossible), then run the above-mentioned program, click on the line with the word in the list Unallocated("Unallocated"), then click the button Partition recovery.

The rest, as they say, is a matter of technique - the action wizard will tell you where to click, where to check the boxes, and then restore your deleted disk.

Tip #2: Installing two or more Windows operating systems on one hard drive

All you need for this is several sections. If your hard drive already has a second partition that is visible in the " Computer" - make sure that there is at least 20 GB of free space (more is better), then during Windows installation simply specify this second (third, fourth, etc.) disk. Once installed, you will be able to select Windows using a menu that appears when you turn on your computer.

If you have one disk ( C), I suggest the simplest option: Through Disk management give it to the section first WITH team Compress, reducing it by at least 20 gigabytes (or better yet, more, because in addition to Windows you will also be installing programs):

Right click on drive C...

After pressing the button Compress disk size C decreases, unallocated (free) space appears in the partition map:

We indicate unallocated space. The installer will create the partition itself.

After installation, you will have two operating systems. You can create unallocated spaces or empty disks and indicate them for installation.

Thanks to reader Vladimir for raising this topic.

You may have noticed that in the screenshots of the Disk Management window, all partitions are marked with a blue stripe. You may have sections with green stripes. What is the difference between blue and green sections?

A green bar in Disk Management is a sign of an extended (additional) partition. As I wrote above, there may be “nested” sections inside, which from the user’s point of view are no different from the main (primary) ones. Nested partitions have one peculiarity - if you reduce their size, then due to the free space that appears, you will not be able to simply expand the main partition. You must first shrink the extended partition itself (which stores free space and the reduced partition) so that free space is created outside of any partitions, only then can you expand the disks.

Standard Disk Management does not work well with extended disks, so if you see green marks instead of blue ones, it is better to use the free programs above - they will reduce the extended partitions, move the free space where necessary and expand the main disk.