What are the settings for a comfortable game in wot. Setting up graphics in WOT

In version 9.0, new graphic effects have been introduced into the game, designed to make tank battles even more beautiful and spectacular.

However, it is important to understand that these innovations will also affect the performance of the game. For this reason, the first time you launch the game after installing update 9.0, the graphics settings will be automatically determined on each account.

In most cases, this is enough for a comfortable game, but if after installing the update you experience a drop in performance, we recommend taking a few minutes to fine-tune the client manually.

1. Select the graphics quality from those offered in the drop-down menu or use the “Recommended” button - the system will automatically select the most suitable graphics quality for the game, based on the parameters of your computer. Graphics Quality settings affect the settings in the Advanced tab. Select a value in the Graphics Quality field if you do not want to configure every option on the Advanced tab.
2. 3D render resolution. Decreasing the parameter value can improve game performance on computers with a weak video card.
3. Selecting the size of the game window. If “Full Screen Mode” is enabled, the field name changes to “Screen Resolution”. If the set resolution in full screen mode does not match the current monitor resolution, the image may be distorted. Increasing the parameter increases the load on the video card and can reduce the performance of the game. You can reduce the load on the video card by adjusting the 3D rendering resolution.
4. Enabling full screen mode expands the game onto your entire computer monitor.
5. Limit frame rate to 60 frames per second. Used when the image on the bottom of the screen is shaking or lags relative to the top.
6. When this setting is enabled, the edges and edges of objects become smoother.
7. Vision angle. The normal viewing angle for humans is about 95°. The smaller the angle, the closer objects become, but the peripheral view is reduced. Does not affect game performance.
8. A mechanism for adapting the color palette for people with color blindness.
9. Monitor refresh rate. You can view your monitor's refresh rate in the settings of your monitor or its driver. Please note that the displayed values ​​depend on the current monitor resolution. Install monitor drivers to display supported values.
10. If the set aspect ratio does not match the current aspect ratio of the monitor, the image may stretch or shrink horizontally. The setting allows you to equalize the proportions on monitors with non-square pixels.
11. Here you can select a monitor for the game if you have several connected to your computer.
12. Change the brightness of the image. Works only in full screen mode. Windowed mode uses the current operating system settings.
13. The color filter allows you to choose the visual design of the game from the proposed options.
14. Moving the slider changes the visibility of the selected color filter in the interface. The picture above shows the changes.

If you need more advanced graphics settings, go to the "Advanced" tab. Please note: Most of the settings below are only available for the Enhanced Graphics renderer.

Some settings and their values ​​are not available for standard graphics.

Settings that significantly affect the performance/performance of the game are placed in a separate block “Significantly affecting performance”. In the image they are indicated by numbers 3–7 and 12–16.

Lowering or disabling these settings can significantly improve game performance.

It is important to pay attention to some points here:

1. By choosing from the two proposed graphics quality options, you predetermine the choice in the remaining categories in this tab.
2. The quality of textures does not depend on the performance of the card, but it is demanding on video memory.
3. Game performance with this setting depends on the power of the video card.
4. Shadow quality is highly dependent on overall system performance, affecting both the video card and the CPU.
5. It is recommended to disable this option if performance decreases in sniper mode.

1. Here you can adjust the display of smoke, dust, sparks, flames, explosions, etc. All these objects depend not so much on the video card, but on the central processor.

1. Various additional graphic effects: air refraction, bloom effect, etc. Strongly depends on the performance of the video card and moderately on the amount of video memory.

Points 8–19, 21 slightly affect the performance of the game, which means that when setting values, you should be guided by your own wishes for the quality of each element (water, trees, landscape, etc.).

Many users will find it useful in paragraph 20 “Dynamically changing the quality of effects” - automatic simplification of effects when system performance drops.

Enabling the option will allow the game to adapt to the speed of your computer.

World of Tanks is introducing new graphic effects designed to make tank battles even more spectacular. However, it is important to understand that these innovations will also impact productivity. For this reason, when starting the game for the first time after installing update 9.0, the player will be asked to leave the current graphics settings or run auto-detection.

If you experience a performance hit after installing the update, we recommend taking a few minutes to fine-tune the client manually.

1. Select the graphics quality from those offered in the drop-down menu or use the “Recommended” button - the system will automatically select the most suitable graphics quality for the game, based on the parameters of your computer. Graphics Quality settings affect the settings in the Advanced tab. Select a value in the Graphics Quality field if you do not want to configure every option on the Advanced tab.
2. 3D render resolution. Decreasing the parameter value can improve game performance on computers with a weak video card.
3. Selecting the size of the game window. If “Full Screen Mode” is enabled, the field name changes to “Screen Resolution”. If the set resolution in full screen mode does not match the current monitor resolution, the image may be distorted. Increasing the parameter increases the load on the video card and can reduce the performance of the game. You can reduce the load on the video card by adjusting the 3D rendering resolution.
4. Enabling full screen mode expands the game onto your entire computer monitor.
5. Limit frame rate to 60 frames per second. Used when the image on the bottom of the screen is shaking or lags relative to the top.
6. When this setting is enabled, the edges and edges of objects become smoother.
7. Vision angle. The normal viewing angle for humans is about 95°. The smaller the angle, the closer objects become, but the peripheral view is reduced. Does not affect game performance.
8. A mechanism for adapting the color palette for people with color blindness.
9. Monitor refresh rate. You can view your monitor's refresh rate in the settings of your monitor or its driver. Please note that the displayed values ​​depend on the current monitor resolution. Install monitor drivers to display supported values.
10. If the set aspect ratio does not match the current aspect ratio of the monitor, the image may stretch or shrink horizontally. The setting allows you to equalize the proportions on monitors with non-square pixels.
11. Here you can select a monitor for the game if you have several connected to your computer.
12. Change the brightness of the image. Works only in full screen mode. Windowed mode uses the current operating system settings.
13. The color filter allows you to choose the visual design of the game from the proposed options.
14. Moving the slider changes the visibility of the selected color filter in the interface. The picture above shows the changes.

If you need more advanced graphics settings, go to the "Advanced" tab. Please note: Most of the settings below are only available for the Enhanced Graphics renderer.

Some settings and their values ​​are not available for standard graphics.

Settings that significantly affect the performance/performance of the game are placed in a separate block “Significantly affecting performance”. In the image they are indicated by numbers 3-7 and 12-16.

Lowering or disabling these settings can significantly improve game performance.

It is important to pay attention to some points here:

3. By choosing from the two proposed graphics quality options, you predetermine the choice in the remaining categories in this tab.

4. The quality of textures does not depend on the performance of the card, but it is demanding on video memory.

5. Game performance with this setting depends on the power of the video card.

6. The quality of shadows is highly dependent on the overall system performance, affecting both the video card and the central processor.

12. Here you can adjust the display of smoke, dust, sparks, flames, explosions, etc. All these objects depend not so much on the video card, but on the central processor.

15. Various additional graphic effects: air refraction, bloom effect, etc. Strongly depends on the performance of the video card and moderately on the amount of video memory.

Points 8-19, 21 slightly affect the performance of the game, which means that when setting values, you should be guided by your own wishes for the quality of each element (water, trees, landscape, etc.).

Many users will find it useful in paragraph 20 “Dynamically changing the quality of effects” - automatic simplification of effects when system performance drops. Enabling the option will allow the game to adapt to the speed of your computer.

How frustrating it can sometimes be to miss a frag because the game is frozen and the enemy has disappeared. At such moments, you really want to kick the system unit or hit the laptop with your fist. There will be very little benefit from this; it’s wiser to just set up the computer once so that the tanks don’t lag and enjoy the process. Read below on how to set up your computer for playing World of Tanks.

Computer settings

Setting up a computer for the game World of Tanks can be divided into two parts: setting up the hardware and working with the operating system. Let's take a look at each of the parts in detail.

• Setting up hardware for World of Tanks

Quite often, good computers show poor performance. The components seem to be an order of magnitude higher than required, but the FPS stubbornly does not want to jump over the 40 mark. There may be several reasons for this.

Firstly, the case may be dirty. If a computer or laptop is not cleaned of dust, it accumulates inside, settling on the cooler and some contact boards. Because of this, the processor cools worse, parts interact more slowly, and the computer heats up.

To increase FPS in World of Tanks you need to properly clean the case. You can do this at home by unscrewing a few screws. The main thing is to remember: the rags should not be wet, and it is even better to use a special vacuum cleaner.

Secondly, some components could simply be outdated. The computer requirements in World of Tanks are not very high (see the table), but perhaps it’s time to replace the video card or RAM stick. Read more about selecting parts for a computer for playing tanks in .

• Setting up the operating system for World of Tanks

Often the problem lies not only in outdated hardware, but also in software that requires updating. To improve performance, you can take a whole range of methods:

1. Update video card drivers.

Drivers are special programs that are responsible for the interaction between computer components and the operating system. The newer the video card drivers, the better performance it can provide. New versions for NVIDIA and Radeon are released monthly and are available for free on the official websites.

1. Clean the system from unnecessary files.

Gigabytes of unused information are stored on almost every computer. 20 seasons of your favorite TV series, completed games, old work documents - all this takes up space, loading the hard drive. Because of this, the system cannot adequately process data, which in turn leads to a decrease in FPS. The factor is certainly not key, but if you remove everything unnecessary, the game will produce 2-3 FPS more.

1. Remove everything from startup.

Startup is a system compartment responsible for launching applications when the computer is turned on. The more applications are turned on, the more RAM will be occupied. This, again, is a drop in productivity. You can remove unnecessary elements from there by launching the control panel and selecting Startup in it (see the pictures).

1. Close everything except the tanks.

This point refers to radical measures for those who want to direct all the power of their computer exclusively to World of Tanks. By closing the browser and turning off Skype, you can gain a few more frames, especially since the necessary things, like radio, have long been .

In-game settings

Even if you set up your computer as correctly as possible, you can only get adequate results from it by setting up the graphics correctly. In order to start this, you must first open the “Advanced” item in the “Settings” column.

There are two ways to go here:

• Immediately set everything to minimum and turn it off.

This is a radical method for owners of very weak computers. The game will not look pretty at all, but there will be fewer lags.

• Selectively disable effects.

Some graphic effects in the game are too much. They add very little, but at the same time “eat up” most of the resources. What should I turn off?

1. Shadows. They consume the largest amount of RAM.
2. Dense grass and foliage. Only a powerful video card can draw all the small details. Owners of medium-sized ones are better off avoiding this.
3. Tracks of caterpillars. They are simply useless.

Installing additional software

Even if the above methods did not help, do not despair. Especially for owners of very bad computers, programs have been developed that completely disable even more effects.

Wot Tweaker

A comprehensive program that simultaneously removes effects and compresses textures. As a result, the graphics drop to the level of 2000, but the performance rises sharply. Download .

Tundra

The Tundra modification for World of Tanks completely removes foliage and grass on the map, in addition, it replaces the standard sky texture with a black one. This was designed as a mod to make aiming and tracking enemies easier, but it also worked well to lighten the load on the system. Download the mod.

Did the article help? Or maybe there is another way to configure a computer with weak parameters for the game World of Tanks? Share in the comments!

How to adjust graphics and not lose FPS?

The World of Tanks 9.0 update has given many users problems with lower frames per second. Even owners of strong computers (let alone weak ones) complain about decreased performance when playing. Let's try to figure out what settings to set so that the game is not only beautiful, but also comfortable.

Standard settings

1. Select the graphics quality from those offered in the drop-down menu, or use the “Recommended” button - the system will automatically select the most suitable graphics quality for the game, based on the parameters of your PC.
2. 3D render resolution. Decreasing the parameter value can improve game performance on computers with a weak video card.
3. Selecting the size of the game window. If “Full Screen Mode” is enabled, the field name changes to “Screen Resolution”. If the set resolution in full screen mode does not match the current monitor resolution, the image may be distorted. Increasing the parameter increases the load on the video card and can reduce the performance of the game.
4. Enabling full screen mode expands the game to the entire monitor of your computer.
5. Limit frame rate to 60 frames per second. Used when the image on the bottom of the screen is shaking or lags relative to the top.
6. When you enable this setting, the edges and edges of objects will become smoother.
7. or at goal of vision. The normal viewing angle for humans is about 95°. The smaller the angle, the closer objects become, but the peripheral view is reduced.
8. A mechanism for adapting the color palette for people suffering from color blindness.
9. The monitor refresh rate does not affect gameplay; it is recommended to set it to the latest suggested value.
10. The setting allows you to equalize the proportions on monitors with non-square pixels.
11. If several monitors are connected to your computer, this column helps you choose which monitor to apply the settings to.
12. Change the brightness of the image. Works only in full screen mode. Windowed mode uses the current operating system settings.
13. Visual filter for game display.
14. Effectiveness of the visual filter.

Advanced settings

Below are the points that especially affect the performance of the game.

3. Predetermines the selection of other categories of settings.
4. Texture quality is demanding on video memory.
5. Game performance with this setting depends on the power of the video card.
6. The quality of shadows affects both the video card and the central processor.
7. It is recommended to disable it to increase FPS.
12. Here you can adjust the display of smoke, dust, sparks, flames, explosions, etc. All these objects are dependent on the CPU.
15. Various additional graphic effects: air refraction, bloom effect, etc. Strongly depends on the performance of the video card and moderately on the amount of video memory.

Points 8-19, 21 slightly affect the performance of the game, therefore, you should adjust the values ​​based on your own wishes for the quality of water, trees, landscape, etc.

Many will find it useful in paragraph 20 “Dynamic change in the quality of effects” - automatic simplification of effects when system performance drops. Enabling the option will prevent the game from requiring more than your computer is capable of.

More detailed and clear information about settings and increasing FPS in the video:

World of Tanks is one of the most popular online games all over the world. Tanks allow millions of people to fight on the best “war chariots” of the middle of the last century, take part in large-scale battles in various locations, and improve their tactical and team fighting skills.

Like any other game, World of Tanks has computer requirements. This means that a successful launch and full-fledged gameplay are possible on computers with a certain power. The minimum system requirements of World of Tanks allow you to run the game on almost any computer, including the old one. But for those who want to play WOT HD, the system requirements will be slightly higher.

What are system requirements

First, let's look at the question of what does the term “minimum requirements for tanks” mean? The system requirements of the World of Tanks game are the optimal parameters under which the game will function normally - without crashes or crashes.

Below we will look at the characteristics of World of Tanks, which you can compare with the parameters of your computer. It is worth noting that the requirements vary from the minimally necessary to the optimal, that is, desirable. Therefore, those who want to fully enjoy the gameplay should still think about upgrading their iron friend.

Minimum settings

The minimum system requirements of WOT are quite flexible, so the tanks will run even on ancient “calculators”. With minimal system requirements, World of Tanks will not surprise users with its graphics, but the application still promises to be stable, and, perhaps, nothing more is needed for bending.

Minimum requirements for World of Tanks

These are the minimum requirements for World of Tanks in order for the game to work stably with the most modest graphics settings. However, this is far from the limit, and if you want to check out all the delights of this game, try to get enough hardware to provide at least an average level of settings.

Medium settings (optimal)

The recommended system requirements for World of Tanks are those requirements at which the game will run stably at medium graphics settings. Optimal settings are a balance between quality and performance.

The optimal system requirements for World of Tanks are now used by most PC users. Of course, these World of Tanks system requirements for a laptop are also suitable, especially if we are talking about relatively new models.

Optimal WOT requirements

Even the average World of Tanks system requirements for a computer are not excessive for most users. At the same time, the picture quality at these settings is already close to ideal.

Maximum settings

The maximum system requirements of World of Tanks can only be achieved by powerful gaming computers, which cost a lot of money. But the quality of graphics will be as realistic and detailed as possible.

World of Tanks HD system requirements

HD are high-resolution textures that will delight players with a very high-quality picture.

As you can see, the technical specifications of World of Tanks are very flexible. Thanks to variable graphics settings, you can run the game both on old low-power computers, sacrificing image quality, and on modern machines - enjoying the excellent detail of tanks and surrounding landscapes.

You should carefully configure the system requirements for the game Tanks so as not to overload the system unit or laptop. Otherwise, the game will not only run poorly, but the hardware will also suffer. Do you think stories about burned-out video cards are just jokes?

Before running tanks at a certain graphical level, look at your stats and the three tables that were presented above. Compare the parameters and only then go into the settings.

The minimum system requirements for online Tanks are suitable for work computers, because many players are not averse to tanking in their office. Please note that for normal operation you must set at least 30 FPS - this is the minimum threshold.

It should be taken into account that the wider the monitor screen, the greater the load on the video card. Therefore, if you have a weak PC, you do not need to run tanks on a large monitor.

The requirements for a World of Tanks computer do not always correspond to the stated ones, because the developers are not yet able to bring the technical part of the game to ideal, although with each new update they are getting closer to this value.

World of Tanks system requirements for PCs are somewhat lower than for laptops. Therefore, if you have a choice of what to buy for computer games, always choose a desktop computer.

System requirements for Android

Above we looked at the system requirements for online Tanks on PC, but don’t forget about the mobile version, which is becoming increasingly popular.

Characteristics of WOT Blitz for Android

The presented technical requirements of World of Tanks Blitz are minimal and will ensure stable operation only at the lowest settings. Therefore, to play with better graphics, you will need more powerful gadgets.

Laptop settings

Let us immediately note that the WOT system requirements for a laptop will always be somewhat higher than those of conventional PCs. Therefore, even with exactly the same characteristics as a PC, the laptop will always produce fewer frames per second (FPS).

The average system requirements of World of Tanks X64 for a laptop are not a problem. A good model will allow you to produce 60+ FPS, and maybe even a hundred, which guarantees the normal operation of the application.

In addition, it should be borne in mind that laptops heat up much more than regular PCs. Therefore, it is worth carefully monitoring the temperature of the modules to avoid problems with the hardware. To keep overheating to a minimum, it is advisable to buy a laptop stand or at least not run the game at maximum settings.

Why do system requirements differ between versions?

WOT computer requirements may differ on different versions of Windows. The fact is that Windows itself, depending on the version, “eats” a certain amount of computer resources.

So, for example, installing Windows 10 on a rather old computer, and then tanks, you will not get a stable running game. In this case, they will work better on Windows XP.

By the way, for those who wondered: will tanks run on Windows XP? For now they will go. However, you should not delay the reinstallation to version 7 and higher.

Video

From our video you will learn many important details about the system requirements of the World of Tanks HD client.