Entering keys into the orton x80 satellite tuner. Updating the Tiger X80 HD receiver from the USB menu

Entering BISS keys into the ORTON 4160cx plus, 4060cx plus receiver. BISS keys are required for some channels, otherwise the channels will not work without them. You can find the Biss keys yourself . You can read below how to enter them into the Orton 4060cx plus or 4160cx plus receiver.

First of all, you need to go to the channel for which you need to enter the BISS key. And press the “I” button, also known as “info”

Programs for this receiver

We will be thrown into an information window with statistics for this channel.

The next step is to press the red button on the remote control at the bottom left and get into the emulator window for editing the key.

Now let's enter the BISS key. Move the cursor to the right side of the screen under the zeros. And enter the key in the place of zeros, y on the key 11 11 11 11 11 11 11 11 We enter this key in numbers in place of zeros. And for some, even most biss keys, the keys come from a combination of numbers and letters. Below in the picture I showed you what buttons there are.

The next step is that after entering the key, press the OK button in the center of the remote control to save the key itself in the receiver’s memory. Then press the MENU button several times in a row until you exit the editor completely. Turn on any other channel and go back to the channel you edited and it should start showing. If this is not the case, then go back to the editor and check if the key is saved? is it entered correctly?

Thus, a key is inserted into this receiver!

Video on entering the biss key into the Orton 4060cx plus / 4160cx plus receiver

Satellite TV users sooner or later wonder how to enter or change keys to conditionally encoded channels. Below are step-by-step instructions for entering keys BISS to the receiver Orton X80.

1. Go to the menu, go to the “information” section.

2. Enter 9999 from the remote control, after which the “Change” item will appear in the “information” section. CAS keys" (for this your tuner must have firmware with an emulator), re-entering 9999 will hide this item.

3. Select the “Change” item that appears. CAS keys".

4. Select the “BISS” item. A list of entered keys will open.

5. To add a key, you must press the green button on the remote control. To change or delete - red or yellow, respectively. The blue button will delete all keys.

Consider entering the BISS key. After clicking the green button, a window will appear:

Purpose of fields:
CA ID - key identifier (BISS, Seca, CryptoWorks). For BISS it is 2600
Service ID - channel identification number.
Key Data - the key itself.
Video PID - video stream identifier.
Leave the remaining fields as shown in the figure.

After entering all the necessary information, press the yellow button.

Orton x80, the most affordable of budget tuners, with separate functions so you can choose exactly the one x80 the functions of which you need. The only difference is on the rear panel; otherwise the tuners are identical. Below I will provide photos of the types of tuners.

ORTON/GLOBO/OPTICUM X80 (RCA)

Receiver characteristics:

1. card receiver (coding system CONAX)
2. support SD (MPEG2), DVB-S
3. Availability S/PDIF coaxial digital audio output, in all modifications
4. standard SCART video output is present in all X80 modifications
5. HDMI video output (only in ORTON X80 HDMI and ORTON X80 PVR)
6. video output RCA (tulips) (only in ORTON X80 and ORTON X80 RF)
7. RF modulator (only in ORTON X80 RF)
8. Interface RS232(in all except ORTON X80 RF)
9. Availability of exit USB(only in ORTON X80 PVR)
10. 12V/50mA switch, present in all X80 modifications
11. Availability of electronic program guide - EPG
12. multilingual menu, including Russian
13. availability of games
14. blocking channels and menu for parental controls
15. ability to edit the channel list: move, block, skip, delete, rename

Technical characteristics of Orton (Globo) X80:

1. Input frequency range: 950-2150MHz
2. RF Input Connector: IEC169-24, Female (ORTON X80 RF)
3. Input impedance: 75Ω
4. Waveform: QPSK (SCPC, MCPC)
5. Image Decoding: MPEG2（MP@ML）
6. Image resolution: PAL 576, NTSC 480
7. Audio Decoding: ISO 11172-3
8. Sound track: Stereo, Left, Right
9. Video/Sound: SCART, Coaxial digital audio (S/PDIF), (HDMI and RF - depending on version)
10. Other connectors: 12V/50mA, (RS232 and USB - depending on version)
11. Voltage: ~230V，50Hz
12. Power consumption: 6 W
13. Consumption power In standby:< 1 W
14. Temperature: 5-40℃
15. Humidity:<95%
16. Weight: ~0.3 kg
17. Dimensions: 180 mm ×190 mm ×42 mm

The receiver can be used either horizontally or placed vertically, which gives the tuner a unique look. Apparently, it is for these reasons (miniature size plus the possibility of vertical installation) that the card reader is located on the side panel of the device. As it turned out in the future, this only simplifies working with the access card.

Receiver ORTON X80 has instructions in Russian. For Asian TV models - RCA (tulips), and for Europeans - ( SCART). And for those who plan to use this receiver as part of a home theater, there is a digital audio output (S/PDF). This receiver model is characterized by low power consumption, one watt in standby mode, and can even turn itself off, 3 hours after the last use.

The receiver's user interface has changed significantly for the better. The menu has become simpler and more attractive. It’s especially nice that the manufacturer took care to make it clear how to insert the access card? The inscription (Chip down) is printed on the receiver body. Naturally, this model can also be used to view regular FTA channels (open channels). And the RS 232 programming port and universal card reader make the receiver more versatile.

Antenna setup, orton x80 instructions. Allows you to select parameters for satellite, converter, DiSeqC and other equipment. I would like to draw your attention to a new type of satellite signal analyzer. Pseudo liquid indicators began to look more presentable. The ORTON X80's response to changing the antenna position is quite fast, which will make setting up a satellite dish much easier and faster.

Lists of television channels can be sorted and renamed.

TV guide. EPG on the Globo X80 receiver. Standard, very convenient. You can view several days in advance. An additional service includes a timer (activated by the blue button) that allows you to turn on the receiver at the right time on the selected channel.

Additional information about the satellite channel is activated by the (info) button on the remote control and consists of several screens. You can view the title of the program and the announcement. On the next screen (info) you can control the signal level and quality.

Internal structure of the Orton X80 receiver

Almost all modern models of Globo and ORTON receivers are assembled on ALI processors. Our orton X80 was no exception. It uses such a well-known processor as ALI 3329C. And to save space, the receiver and power supply were assembled on one board. The tuner here is also of a new modification, by the way, the sensitivity in this model is at a fairly good level, which allows you to use this model with remote antennas, despite its cheapness.

Also, one interesting design feature of the new receiver is the use in it of a new model of one of the most modern tuners WGCE5039. A distinctive feature of this tuner is its miniature size and, of course, good sensitivity.

Activating the emulator in x80 receivers

orton x80,ortonx80 RF, orton x80 hdmi, orton x80 pvr, orton x80 premium

1. Enter MENU

3. Press 9999, the BISS menu will appear in the Tools tab

Entering BISS keys into Orton x80

To activate the BISS emulator in X80
Press MENU
Become the cursor on TOOLS, but do not enter the section
Press 9999 in the section BISS will appear
To enter keys, go to the desired channel, press (info) 3 times, enter the key in the window that appears, numbers 2 and 3 are also used to enter letters, after entering the key, press the yellow button
the channel will open immediately, all keys will be displayed in the BISS section
the number of keys is unlimited
Software with keys can be transferred to other devices via rs-232 as on ordinary Globo 4100

For firmware versions _V54C, _V56C, _V59C.
And so, click Menu / Information / Change CAS keys / BISS / Add.
Enter the ident value and key. But the key consists of 16 pairs, so we enter it 2 times.
Further:
Video PID. Here we will need an engineering calculator, which is found in every computer operating system. We press the button (info) on the remote control, look at the value of Video PID and transfer it to the calculator, which is set to mode (programmer) / active button (Dec) / By pressing the button (Hex), we find out the value we need.
For example channel (NLO TV)

In Dec mode we have 6681, switch to Hex mode and get 1A19. These 1A19 are entered into the VPID field!

Tiger X80 HD is a super cheap receiver released by Tiger. This is a modern device with top-end characteristics that is not inferior to new models from other manufacturers on the television technology market. A distinctive feature of the Tiger X80 is its modest price and excellent functionality.
The Tiger X80 HD body contains: a single USB 2.0 output, an antenna input, HDMI, an RS232 connector, and analog outputs for audio/video. Everything listed is located on the back, and the power switch is also located there.
The Tiger X80 HD model is considered the younger brother of the Tiger 4050 HD model, although it was discovered a little later. The Tiger X80 HD differs from the Tiger 4050 HD in that it is made in a smaller plastic case (Tiger 4050 HD is made in an iron case) and has the latest GUOXIN GX6605 processor with a clock frequency of 600 MHz.

Characteristics of Tiger X80 HD:

GUOXIN GX6605
Standards supported: SD / HD (MPEG2 / MPEG4 H.264), DVB-S, DVB-S2
DiSEqC control version 1.0; 1.1; 1.2/USALS
Memory up to 10,000 channels (TV and radio)
LED display with channel number indication.
Quickly switch between channels
Convenient ability to create your own lists of favorite channels
Electronic guide - EPG
Multilingual menu
Child lock function
Software update via USB
PVR - for setup and recording/playback
Video recording and playback (when connecting a USB drive)
Supports playable file formats: jpg, bmp, gif, mp3, ogg, flac, wav, mpg, avi, 3gp, mkv, mp4, mov, ts, m2ts, dat, vob.
Support for external Wi-Fi adapters
Front panel "Tiger X80 HD"
VFD display
Menu control buttons
Rear panel "Tiger X80 HD"
NB IN, for connecting a cable from a satellite dish;
DV-OUT digital audio and video output (HD);
VIDEO, AUDIO L, AUDIO R, analog composite video and audio outputs, for connecting to analog TVs;
HDMI, a digital video and audio interface for connecting to a TV, provides maximum picture and sound quality;
USB 2.0 port, USB port(1 pcs)
RS-232, service port with serial data transmission, is intended for service by trained engineers and technical personnel and is not recommended for use by receiver owners;
ON/OFF switch for supplying power 90-240 V 50/60 Hz to the receiver.

Tiger X90HD- a follower of the popular Tiger X80HD receiver model, which was one of the first to show a low price for a “normal” HD format receiver. Tiger X90 HD, unlike the X80 HD, has a more solid metal body, received PowerVu support, but lost Dolby Digital. The new product supports all popular encodings when changing to custom software using a USB external drive. Tiger X 90 HD runs on a high-performance GUOXIN GX6605S processor, has a built-in power supply and plays all popular media formats from a USB drive.

Software

Updating Tiger X80 HD receiver from USB menu

Activating the patch menu (emulator)

Updating the list of channels and keys

Function keys

Receiver Tiger X80 HD / Tiger X90 HD - Settings, firmware, channel editors