How to get hooked in CS GO - don’t let anyone interfere with the game! How to hook up all players with one button in cs:go? Mut in ks.

Good day friends! Another introductory article on the topic how to hook up a player in CS:GO. It would seem a very simple question, but there are some nuances here that many may not be aware of. In addition to the usual mute in cs go, I will show you a way to quickly mute all players with one click.

How to hook up a player in CS GO?

The easiest way is to hook up a player using the standard method, which is available to everyone. During the game you need:
1. Press the TAB key. You will see a list of all players and their information
2. Left-click on the desired player
3. Select “Block all connections”

After blocking, you will not hear any messages from the player, neither in voice chat nor in regular chat.

How to hook up all players in CS GO?

This method will allow you to turn off everyone’s voice chat and turn it on with one bind. This bind will be very helpful, especially in competitive mode, when you are the only one alive, and your teammates are actively arguing about something.

For the bind we will use the commands:
voice_scale 0(0 – mute everyone, 1 – enable voice chat)
say_team (a message in your team's chat will serve as information)

The bind itself:
bind "0" "voice_scale 0; say_team voice chat off"
bind "9" "voice_scale 0; say_team voice chat off"

My bind is on buttons 0 and 9, but you can put it on buttons that are convenient for you.

And as usual, video:

Thank you for your attention! Good game!

Often when playing in a pub (Normal mode), squabbles, screams, songs, curse words, etc. begin in the general voice chat. And at these moments you want to turn it all off and enjoy only the sounds of the game. So how to hook everyone up in cs go? Of course, such situations happen not only in the pub, but also in MM mode.

Almost everyone knows how to hook up each player individually. To do this you need to press the button Tab and while holding it, left-click on the annoying player. Then select from the drop-down menu "Block all connections."

After which a red crossed out speaker will be drawn opposite the nickname on the player icon

But there are many of these, and every new map or new game you have to do it all over again!

How to hook everyone up in cs go at once?

To do this, you need to enter the command in the console voice_enable 0. That's all! You can't hear what other players are saying into the microphone, but they can hear you.

How to enable voices in csgo?

How to muddy/muddy up the voices of players in cs:go with one button?

The console command above certainly simplifies life, but you will have to enter something every time voice_enable 0, then again voice_enable 1. Over time it gets boring.

In order not to enter a command every time, you can bind it to a button!

Write it in the console bind BUTTON NAME "toggle voice_enable". And now, every time you press the selected button, you will turn on the voices if they are turned off and turn off the voices if they are on!

ATTENTION! Don't forget the phrase " BUTTON NAME" replace with the name of the button (only English names). For example, my command looks like this: bind m "toggle voice_enable". That is, I turn voices on/off with the "m" button.

Write your comments and questions below! Thank you

It often happens that chatter in headphones makes it difficult to concentrate properly on the game. It would be all right, but this could result in you not hearing the steps of the approaching enemy, simply being distracted and, as a result, losing the entire round. It’s such a shame to lose a victory when it was enough to muffle all unnecessary sounds and be completely immersed in a shooter!

Well, this problem can be solved very easily! To do this, you can turn off the sounds from all partners, and do this with just one button - there isteam to mute everyone in CS GO. You can also mute just one annoying player. Both methods are explained in this post.

There is a command to turn off sounds - you will not hear what your partners are saying. This is "voice_enable 0". To activate it very quickly, you need to bind a button convenient for you to it in the console. This is done by the team -bindyour button « voice_ enable 0″ .

Then you need to do the same for the “voice_enable 1” command to hear the guys from your team again. To do this, enter the command in the console -bindyour button « voice_ enable1" .

And so that this “miracle” does not raise questions at all, let’s seehow to hook up everyone in CS GO via the consoleusing the example of the “-” button to turn off sounds and the “+” button to turn on. So:

1. Open the console.
2. Enter - bind — « voice_ enable 0″ .
3. Enter - bind + « voice_ enable1" .

You can also bind only one button to mute/enable sounds. To do this you need to enter the commandbind your button "incrementvar voice_enable 0 1 1" . If you select the “-” button, then this is done like this:

1. Open the console.
2. Enter - bind — « incrementvarvoice_ enable0 1 1" .

Now you can play with maximum concentration and, of course, with maximum efficiency!

The same commands work for Dota 2.

How to enter console commands into CS:GO

You can make some small explanations for those new to the console command system. To enter them, you need to:

1. Go to Settings.
2. Select Game Options.

1. Set "Yes" to "Enable Developer Console".

After this, in the game you can press the tilde – “~” to open the console and start entering the command.

only one player

It happens that only one person creates problems with disturbing sounds. Why bother everyone then? You can mute only the irritating factor. To do this you need:

1. During the game, press the " Tab " A list of players will appear.
2. Right-click on the interfering partner.
3. Click the menu item “Block all communications”.

That's all - now this person will not pester you.

Using the "voice_enable 0" command and blocking sounds from one player does not mean muting your microphone - do not talk too much!

Happy, focused gaming sessions to you guys!

To bind a button in cs go, you need the bind command. Practical example:

bind x "noclip" – means to bind the noclip to the x key.

I think everything is clear here.

How to remove bind in cs go

To unbind (delete), use the unbind command. Example:

unbind x – unbind the x key.

Useful binds in cs go

Here are the most popular binds:

Table 1. Frequently used binds in cs go

How to bind a button in cs go to issue weapons

Look, we have three situations:

• We want to give ourselves weapons on the server
• We want to buy weapons
• We want to choose a weapon

Each action has its own command + you need to know the names of the weapons. Next in the table I will show you everything clearly.

Table 2. Weapon bindings in cs go

Table 3. Binds for pistols in cs go

Table 4. Bins for grenades in cs go:

Table 5. Other:

Binding buttons via config

To avoid having to register new binds every time you log into cs go, it’s useful to immediately add them to the config. Read about how to find it. When you find it, open it and write all the commands you need (just as you would write in the console). Click save.

How to bind a 180 degree turn

In order to create a reversal, we need the following command:

bind x +right – bind itself (turn right);

How to bind on numpad

In order to assign numpad buttons on the keyboard, you need to know their names. They are convenient to use for quick purchases before starting to play on the map. I’ll give an example of such a bind so you don’t get confused, and below are the notations themselves:

bind kp_letfarrow "buy defuser"

Table 6. Designations of buttons on numpad

How to bind mouse buttons

It's the 21st century, so many of you have gaming mice. Naturally, there are side buttons that would be useful for bindings. Well, you already know how to do it. It remains to introduce you to the necessary phrases:

Table 7. How to put binds on the side mouse buttons

Bind to change hands in cs go

To quickly change your right hand to your left or vice versa, you need to use this command:

bind "c" "toggle cl_righthand"

Useful binds

The first is grenade binds. Thanks to them, you can switch much faster to the grenade that you need. This saves time and therefore gives an advantage. Examples:

bind "mouse5" use weapon_knife; use weapon_flashbang - flash drive bind "x" use weapon_smokegrenade - smoke bind "c" use weapon_molotov; use weapon_incgrenade - molotov bind "v" use weapon_hegrenade - fragmentation

The second is a bomb drop.

bind "z" "use weapon_c4; drop;"

Third, turn on the display of what teammates bought. It shows what weapons and what grenades your allies have purchased.

bind "mouse3" "+cl_show_team_equipment"