Reinstalling Windows on the laptop. How to reinstall Windows on a laptop - step-by-step instructions Reinstalling windows 7 from a disk on a laptop

For the correct operation of your compact laptop PC, you need to know exactly how to reinstall Windows on a laptop. Many users often encounter the problem of reinstalling the OS and prefer to solve problems on their own. We will describe step-by-step brief instructions on how to reinstall Windows on a laptop from scratch.

Preparing to reinstall the OS

First of all, you need to make a copy of the necessary information from drive C, since the reinstallation process involves the destruction of all information from this drive. If there is an emergency reinstallation, this step is skipped. It should be noted that if you have no idea how to reinstall Windows on a laptop or are doing it for the first time, then it is better to invite a specialist. If you do not have this option, please use the information below.

Selecting drivers for reinstalling the OS

So, you will need a bootable operating system disk for your laptop. Modern laptop manufacturers equip PCs with operating systems such as Windows 7, Windows 8. However, earlier versions of this OS, such as Windows XP, are also in demand among users, so the question is: “How to reinstall Windows XP on a laptop ?" is still relevant today. It should be noted here that to reinstall Windows XP you need SATA drivers, which can be included in the Windows XP distribution or added by you yourself. Later versions of the OS already have built-in drivers. For those users who know how to reboot the system on desktop computers, the question is: “How to reinstall Windows on a laptop?” will not be difficult, they will easily understand all the points.

Start reinstalling the OS

Insert the disk into the drive and turn on the laptop. By pressing del we go into the BIOS. In different laptop models, entering the BIOS can be done differently: by pressing the F10, F1 or F2 keys. Next, we need the Boot tab, in which we select the order in which the laptop will boot from the CDROM. Go to the Exit tab, click on Exit Saving Changes. Next, the process of starting the laptop will occur from the boot disk that you inserted into the CDROM.

Installing the system from disk

Let's move on to installing the system from disk. First you need to select or create a partition for installing Windows and specify its size. By clicking on it, we proceed to formatting. The system will offer you two formatting options - fast NTFS and full FAT32. The most common option is NTFS, select and press Enter. Having completed formatting, the system begins the operation of copying its installation files to the hard drive. After the system reboots, Windows starts.

Data setup

Let's move on to setting up basic data, such as input language, your name, license key, computer name (any), administrator password, which you need to write down in the windows offered by the system. Then the time and date data is configured, and you should select the time zone of your region. The penultimate stage of installation ends with setting up network parameters, where we select the “Regular Settings” tab.

Completing the installation

To complete the system installation process, you must restart the laptop. We hope that you now understand how to reinstall Windows on a laptop. Good luck to you!

14.01.2016

Before installing Windows 7 on a laptop, you need to make sure that all important data has been copied to a USB drive, another hard drive partition, or to another hard drive. Surely, on any computer there is information that can be useful in the future, so we save it to avoid loss.

If you bought a laptop with licensed Windows 7 installed and do not want to lose your license, then instead of reinstalling, you can restore the system to factory settings. The manufacturer reserves the system's hard drive memory (on some models a separate logical drive can be used for this) of several gigabytes, which is where all the files needed to restore Windows are located.

Unlike reinstalling the OS, we will need to run not the Windows Installer, but the recovery utility. To launch it, you need to press the key shown in the computer startup window next to the manufacturer’s logo.

To launch the recovery utility on some Sony VAIO models, for example, there is an ASSIST button.

ASSIST key on a Sony Vaio laptop

To launch the recovery utility, press the corresponding key on the laptop:

• Samsung - F4
• Lenovo-F11
• HP - F11
• LG-F11
• ACER – alt+F10
• ASUS – as soon as the splash screen appears, press F9
• DELL – as soon as the splash screen appears, press F9
• Sony Vaio – F10 (in rare cases you need to press the ASSIST button)
• Rover – when you turn on the laptop, you need to hold down ALT.
• Fujitsu - F8

For more detailed information on running the recovery utility for your laptop, you can look in the instructions or on the manufacturer’s website.

Now, using an HP laptop as an example, I will show you how to restore the system to factory settings.

To launch the system recovery utility, after pressing the power button, press the Esc button several times. After this we see the following window.

To launch the recovery utility, press the F11 key.

We launch the recovery program and select the item “Restore the system to its original state when supplied from the manufacturer.”

If all important data is saved, then we continue recovery without creating a backup copy of the files. Click Next.

We disconnect all connected devices from the laptop: flash drives, printers, modems.
Click “Next”.

Then the Windows recovery procedure starts. It will take approximately 15-20 minutes, this time is several times shorter than a complete reinstallation of the system. The progress of the operation can be seen on the display.

After the recovery is complete, click on the Finish button and reboot. Licensed Windows 7 with factory settings and all pre-installed programs is ready for use.

However, this logical partition on the disk on which the files necessary to restore Windows are stored can be easily deleted, for example, when installing a pirated copy of Windows by “professionals” to increase the hard drive memory by several gigabytes. If this is your case, then read on.

Installing Windows 7 from a USB flash drive

The main steps that need to be performed to install Windows 7 on a laptop are setting up the BIOS firmware and directly installing the operating system itself.
Then everything is even simpler. To reinstall Windows 7 on a laptop, simply follow the installation instructions, watching the installation process step by step. Below are screenshots with a short explanation of the actions performed.

If you want to keep your license

Now we are looking for this sticker on our laptop with the key and the name of the version of licensed Windows 7. If you had licensed Windows 7 installed when you bought your laptop, then you will definitely find this sticker.

Now download the OS distribution kit, the key of which is indicated on the sticker. If it says Windows 7 Home Premium, then you need to download the image of this particular version of the OS and install it. For other distributions, the license key will not work.

We continue installing Windows 7 on the laptop

The reinstallation process described below is suitable for any laptop or computer.

Now we will need to write the downloaded Windows 7 distribution onto a flash drive or disk and start installing the system through the BIOS. To record Windows, you can use one of the following programs:

• Ultra ISO
• WinSetupFromUSB
• Windows 7 USB/DVD Download Tool 1.0
• WinToFlash

You can read more about each of them, the advantages and methods of recording a disk image for each program in.

To run USB on your computer, you must first set the drive to first place in the BIOS boot priority. To do this, go to the BIOS by pressing the appropriate key.

Depending on the BIOS version, setting bootloader priorities may vary, but in general it comes down to several steps in all cases: entering the BIOS - Finding the option responsible for device boot priority - Setting boot priorities.

Go to BIOS

Login to download section

Setting download priorities

In our case, we select boot from USB or boot from CD-ROM if Windows needs to be installed from disk. Don't forget to save the changed parameters before exiting.

Read more about the Bios firmware, its types and settings.

If all the settings in the BIOS were made correctly, then a window like this will appear with the inscription “Press any key to boot from CD or DVD,” which means “Press any key to boot from a CD or DVD.”

Click “Install” to begin installing Windows.

Here we need to select the version of Windows for which we have the key. You will need to enter it not now, but at the end of the installation. Also, if you do not enter the key at all, then within 30 days the installed OS can be used without any restrictions. The only thing that will appear is constant security messages about entering the key.

We agree to the terms of the license agreement. Click Next.

Select the full installation.

Select a partition to install Windows 7. To format the partition, click Disk Setup. If you do not have any created partitions, and the system defines the disk as an unallocated area, we also use the Disk Settings utility to create a new partition.

This is where there may be a section in which files for automatic recovery of the laptop are saved. This method of automatically installing Windows was described a little higher.

The installer warns us that the disk will be completely cleaned and all files on the disk will be erased. If you have important data on your hard drive, be sure to copy it to another disk partition or to a flash drive. By clicking OK we agree.

We wait until the installation of the system is completed. Our participation is not required here, we are just waiting.

After installation, enter the computer user name.

Enter the key if required.

Set the security mode. Here you can turn on or off automatic updates and the firewall.

If your computer has network connections and does not need to install a driver, the system will prompt you to select a connection type.

This completes the Windows installation. To make your computer a full-fledged assistant, you can proceed to installing drivers and necessary programs.

That's all for me. The instructions turned out to be quite detailed and large. But this shouldn't scare you. It is designed primarily for beginners, for those who have not installed Windows 7 on a laptop before.

The need to reinstall Windows 7 can be caused by various reasons: the consequences of a virus, crookedly installed drivers or programs, or simply a desire to return the laptop to the state it was at the time of sale. Currently, almost all commercially available devices allow you to reinstall Windows 7 in two ways: use the system's built-in recovery tools supplied by each manufacturer, or install Windows 7 over the existing operating system, overwriting all the data stored there.

The first method allows you to return the laptop to pre-sale condition, preserving the system license, which is usually included in the price of the device, and also relieves the user of the need to reinstall the utilities included with the device. The second method allows you to write a “clean” system onto the device without programs provided by the manufacturer that are unnecessary for some users, but deprives it of the ability to use the paid licensed Windows 7.

Starting a licensed Windows 7 recovery on a laptop

If you have never reinstalled the system since purchasing a laptop, you can use the built-in tool to return the device to its factory state, which is the same as reinstalling the operating system. This is possible due to the fact that the manufacturer creates a recovery image in a hidden partition of the hard drive, which takes up only a few gigabytes.

To start Windows 7 recovery, press a special key several times when the system starts to boot, when the manufacturer's logo appears on the screen. You can usually find out which button or combination of buttons to press from the information at the bottom of the screen, where it should say something like Press F2 for Recovery.

The main laptop manufacturers have the following system recovery keys: MSI – F3, Samsung – F4 (you can also use the built-in Samsung Recovery Solution III utility), Fujitsu Siemens and Toshiba – A8, ASUS – F9, Sony VAIO and Packard Bell – F10, HP Pavilion, LG and Lenovo ThinkPad - F11, Acer - Alt+F10. You can get more specific information about each device on the manufacturer’s website.

Restoring a laptop to factory condition

Reinstalling the operating system using a boot image created by the manufacturer is quite simple. Let's consider this operation using an Acer laptop as an example.

When the manufacturer's logo appears, press the Alt + F10 keys simultaneously. Press it several times to make sure it works.

A window of the standard Acer eRecovery Management utility, designed to restore the system, will appear on the display. If the program asks for a password, and you are sure that you have not changed anything from the standard settings, try the factory passwords 000000, 00000000 or AIM1R8.

You need the “Full recovery...” item. Please note that when using this utility, all information on the system drive C: will be deleted, so copy the necessary files to another medium in advance.

A warning will appear in the next window that must be read to avoid any surprises.

The file recovery process takes approximately 15-20 minutes. This is much less than a complete reinstallation of the system would require.

After the operation is completed, all that remains is to click OK to reboot the device.

Windows 7 initial setup utility

After the computer reboots, the system recovery utility will be launched, in the first window of which you should select the keyboard layout language and click Next.

After this, you should enter your username and computer name, and in the next window agree to the license agreement.

You should choose the automatic update method based on your preferences. Most often, it is best to use the recommended settings.

Enter the time, date and time zone.

After this, a desktop will appear in front of you, at the bottom of which the progress of installing drivers and utilities will be shown. This usually takes about 20 minutes. Typically, the device comes standard with an antivirus, which from time to time will make a request to enter information into the registry. Click OK.

After the process of installing drivers and programs is completed, the utility will delete temporary files and reboot the system.

Usually, after this, a pre-installed antivirus (most often McAfee or Symantec) request for activation appears. The optimal solution would be to remove this software and install a better antivirus instead (for example, Eset Nod32 Smart Security or Kaspersky Internet Security).

Please note that in some cases the system image on the hidden partition may be damaged, which will make it impossible to reinstall Windows 7 on the laptop while retaining the license. To avoid this, you should create a recovery disk in advance using the Acer eRecovery Management utility. To do this you will need two DVD-R discs.

Restoring factory settings on laptops from another manufacturer is no different from the procedure described above.

Some users prefer to stop using the licensed Windows 7 included with the laptop, replacing it with another system. This may be due to several reasons. Firstly, not all users like the factory configuration of the device, which includes programs and utilities that take up space on the hard drive; secondly, some prefer to replace Windows 7 with another version of the system, for example, change the 32-bit version to a 64-bit one or Starter on Home Basic or Professional. In addition, some users even prefer to use all kinds of “assemblies” that include many programs.

In this case, there will be no difference from the standard installation of the operating system. Initially, you need to prepare a boot disk with Windows 7 recorded on it or, if the device is not equipped with a DVD-ROM, a bootable USB flash drive.

The first step is to download Windows 7 from the Internet. If you want to use the system according to your license, you should download exactly the version for which the key is indicated on the laptop. Usually the inscription looks something like this: windows 7 basic OEM 32-bit(x86). Accordingly, you should download a similar version of Windows 7, since the key indicated on the bottom of the laptop is only suitable for it. If you are going to use a pirated copy of the system, you can choose any OS version you are interested in.

Creating a boot disk

After you have downloaded the system image, you should burn it to DVD, for which you can use the free ImgBurn program. Insert a blank disc into the DVD-ROM and run ImgBurn. In the window that appears, click the Browse button and specify the path to the Windows 7 image.

In the program settings, specify the minimum speed.

After the DVD burning process is completed, a small window will appear. Click OK, after which the disc with Windows 7 recorded on it will be automatically ejected from the DVD-ROM.

Preparing to install windows 7

Now you need to set the BIOS to boot the device from disk, otherwise the computer will continue to run Windows installed on the HDD. To open settings

BIOS, repeatedly press the key indicated at the bottom of the screen while the system boots.

In the BIOS settings, you should find the First Boot Device item, where you can change the settings so that the DVD-ROM comes first. Please note that while the BIOS is running, the mouse buttons will not work, so you will have to perform all the necessary actions using the arrow buttons on the keyboard.

To save the settings and exit the BIOS, press the F10 key.

Reinstalling windows 7

After that, all that remains is to insert the Windows 7 disc into the DVD-ROM and restart the computer. After a while, a black screen will appear in front of you with the words Press any key to boot from Cd. Press any key. The installation of Windows 7 will begin.

In the next window, click on the Install button.

Ten minutes later, a window with a license will appear in front of us. Check the box to accept its terms and click Next.

In the next window, select Full installation.

After this, you will see a list of partitions, including the system disk. Select it and click on the Format button. The system will delete all information available there from the partition.

Once the drive is formatted, click Next. The process of unpacking the files will begin, which usually takes about 20 minutes.

You need to wait for a window with fields to enter your name and computer name (can be anything).

Password fields can be left blank.

Enter the product code, which can be found on the bottom of your laptop or on a sticker on your laptop.

In the next window, select Use recommended settings.

Set your time zone.

In a few minutes, the Windows 7 desktop will appear in front of you.

Now you know how to reinstall Windows on a laptop by simply returning the laptop to factory settings or installing a new clean system on it.

it-dix.ru

How to reinstall windows 7 on a laptop in different ways

Most laptop users are faced with situations where they need to reinstall the operating system, often while keeping the licensed Windows. This publication discusses several methods of how to reinstall Windows 7 on a laptop, and also talks about the nuances of the process of installing the OS on laptops from different manufacturers.

Restoring the system using a Windows 7 backup

Most mobile computer manufacturers create backup storage for 7 distributions or any other OS. Reinstalling Windows 7 on a laptop from these memory areas is done using built-in utilities.

To start the reinstallation, reboot your laptop and press:

• for windows on an hp laptop on F11;
• on an ASUS laptop on F9, boot immediately when you start;
• for windows 7 on a Lenovo laptop on F11;
• on an acer laptop, the key combination Alt + F10 is suitable;
• for windows 7 on a SAMSUNG laptop on F4.

After pressing the desired key, instead of the standard Windows 7 boot, the OS recovery interface will open:

After downloading the program, follow the instructions to restore Windows.

But remember that all settings will be reset, and data from the previous copy of the system may be deleted.

Reinstalling from disk

When reinstalling from disk, remember that to restore the license you need to use a distribution kit with exactly the same OS as was installed previously. You can find out the version of the installed system on a sticker, which is usually located on the back of the laptop. By the way, the license key for your copy of Windows is also located there.

Remember that when you reinstall, a new operating system is deployed from the disk, and to avoid problems in the future, you should delete the data from the previous Windows.

This is accomplished by formatting the system partition, so take care in advance to transfer all the necessary data from the selected hard drive volume to install Windows. It is not advisable to transfer installed programs, since this will lose connection with the registry, and many of them may not start. Don't be lazy, install them again after replacing the OS.

The installation disk distribution does not include drivers for all laptops, so download the drivers for your device in advance from the manufacturer’s official resource. If this is not done, then after installation there is a high probability of the following problems occurring:

• The network card does not work;
• Wi-Fi does not work;
• Applications do not launch.

If you reinstalled the OS without this, then to troubleshoot network equipment you will have to download the driver distribution using another computer and transfer them using removable media, so before reinstalling, do not forget to play it safe and download drivers for the network card and Wi-Fi module.

To begin the installation process, insert the disc into the drive and restart your laptop. After your computer starts, open the boot menu and select boot from DVD.

This dialog is called up on most laptops using the F12 key, and on HP devices the combination F9 + Esc is used.

Often on older computers this function is missing, so you will need to open the BIOS and edit the boot priority yourself. To go to the BIOS on laptops, manufacturers use the following keys:

• Acer, Asus, Samsung, Lenovo - F2;
• hp - F10 + Esc.

If the brand of your device is not in this list, then find out the actual key for it on the window that loads when you turn on the PC.

The BIOS interface from different manufacturers is not similar in appearance, but the sequence of actions for changing the boot priority is almost identical. Navigation through the windows of a running BIOS of all versions is carried out using the arrows on the keyboard and the Enter, Esc, +, - keys.

Sequence of actions for BIOS AMI:

Sequence of action for BIOS Phoenix-Award:

Windows installation

After making a change to the BIOS and rebooting, a dialog will appear with the message: “Press any key to boot from CD or DVD.”

Further installation of Windows 7 is not difficult, do the following:

Reinstalled Windows is ready to go. If you changed the boot priorities in the BIOS, return the hard drive to first place in the list, otherwise the computer will constantly try to start from the DVD.

Reinstallation from a flash drive

Many compact PCs, such as netbooks, do not have a DVD drive. Therefore, the question arises of how to properly reinstall Windows 7 on them. The answer is simple - use removable media.

To reinstall from a flash drive, you need to download the Windows 7 distribution image in ISO format and write it to this media using a special utility. Remember, in order to correctly reinstall a licensed Windows system, you need to download a container with the same OS version. The flash drive itself must have a capacity of at least four gigabytes.

Burning Windows to media using the most popular UltraISO utility among its analogues is performed according to the following algorithm:

The installation flash drive is ready, but to start the installation, you need to select “USB-HDD” in the BIOS as the priority device for starting the laptop. How to set up the BIOS is described above, all steps are similar, you just need to select another entry from the available list. Further installation is no different from installing Windows 7 from DVD.

Often after reinstalling Windows does not work. To solve this problem, take another OS distribution and repeat the installation process. In addition, many users ignore the need to format the partition and reinstall the seven on a disk that already has an installed copy of the system. Avoid this as it can also cause problems.

Conclusion

This article covered reinstalling Windows 7 in several ways. If there is no backup copy, then this procedure should be carried out from a disk on which exactly the same version of the OS is recorded. Some laptops do not have a CD-ROM, so reinstallation can only be done using external media, for example, a flash drive.

Video on the topic

Good publicity:

UstanovkaOS.ru

How to reinstall Windows 7 on a laptop without a disk?

In this article I will talk about the features of how to reinstall Windows 7 on a laptop, and also describe step by step all the steps involved in performing this procedure. This problem is especially relevant for laptop owners whose machines do not have a CD drive. Let's look at the situation using an example: Windows 7 OS installed on a laptop does not boot, there is either no installation disk, or for some reason we cannot use it, but we need to restore the licensed system.

How to reinstall Windows 7 on a laptop?

Before you reinstall Windows 7 on your laptop, first consider the option you need.

There are two ways to solve this problem:

1. The first option is suitable for those who have a work machine - a laptop. In this case, you can try to resuscitate the system by using the boot backup area of ​​the laptop.

As a rule, most manufacturers create a special partition on the laptop hard drive through which the user can restore systems. But each manufacturer has its own hotkeys, by clicking on which you can activate a special section.

We click on reboot the system and just before booting we press the key, depending on the brand of the laptop. This must be done to enter the BIOS, so I recommend that you read the article where I told you how to enter the BIOS on a laptop.

• Samsung - F4
• Lenovo-F11
• HP - F11
• LG-F11
• ACER – alt+F10
• ASUS – F In this case, you should press the button when the splash screen appears.
• DELL – F9 In this case, you should press the button when the splash screen appears.
• Sony Vaio - F10, but it may also be that the ASSIST button is responsible for this function

Window of the required recovery utility. The picture shows an ACER laptop.

After this, a reinstallation wizard will appear in front of you, whose instructions you need to follow.

Advice. When reinstalling, a complete reset of settings and data loss occurs. If your laptop does not have important information, then you can start reinstalling without hesitation.

Note to everyone! For owners of Beeline operators, I wrote an article where I talked about the Beeline speed auto-renewal service, as well as how to read someone else’s correspondence in contact. Also on the topic, I told you how to write Windows to a flash drive and how to borrow on a Beeline.

1. Second option. Reinstalling the system using a flash drive (flash drive). The essence of the method is the same as in the case of a disk. First of all, find out which edition of Windows 7 is installed on your PC and the key number. This is necessary to maintain your license.

For example, the cover says “windows pro” - this means that the image is called windows 7 professional. And if the edition is not important to you, then you can download any one. The image index is .iso.

Let's say you managed to download the image, now you need to transfer it to a flash drive. It is best to use a flash drive about 8GB in size.

You can use the UltraiSO utility to record the image.

• Connect the flash drive to the PC
• Launch UltraiSO.
• Already in the program we select the path to our image with Windows 7 OS.

Then go to the boot menu, indicate the desired image and click on “Burn”.

After successfully recording the image, the last step remains to be done, but it is also the most important. We need to insert the USB flash drive into the PC and enable it to boot into the BIOS of the computer being restored.

You can enter the BIOS through the Del button, but, as you know, the same operations may differ for all manufacturers.

1. F1 - LENOVO, HP, Dell laptops.
2. F2 - Acer, Asus, Samsung.
3. F10 - Toshiba.
4. F12 - Lenovo.
5. Ctrl+F2 - Asus.
6. Ctrl+Alt+Esc - some Acer and others.

And to make it even easier, when loading, an entry will appear on the screen, it will say where and what button to press to enter the BIOS.

In the BIOS we make the following settings:

We reboot the PC and follow the instructions of the Windows 7 installation wizard. I will note only one thing: the design in the BIOS may be different, but you can figure it out logically and easily reinstall Windows 7 without a disk.

That's all I have for today! I hope now you know how to reinstall Windows 7 on a laptop. Well, if something doesn’t work out, you can write about it in the comments and I will be happy to help you. If the article was useful to you, vote and like) Good luck and health to you!

With UV. Evgeny Kryzhanovsky

24PK.ru

How to reinstall windows 7 on a laptop in an hour

More and more people around the world are accustomed to using laptops, and according to our research, most users prefer Windows 7, the modern and improved “eight”. But sooner or later, everyone has a question: “How can I reinstall windows 7 on a laptop?” We are ready to help you with this using simple and straightforward examples that are reflected in everyday life. So, you should start with the basics, that is, with preparation for reinstallation.

Start of reinstallation

Preparation is important everywhere, even if we have to install Windows 7 on a laptop. Of course, you can do without this and simply demolish the old system without saving data and without preparing information. But we still advise you not to neglect our advice, since there is a big difference between the words “I can” and “I can.”

If you have a new laptop, then you should be curious about how much system storage is installed on it. As a rule, laptop sellers install both the system and general information on one medium. This is not entirely correct, since now you will not be able to save all the data that is necessary, for example, photos or browser bookmarks. But if your laptop has two storages, then you are in luck. But again, look at the volume they have.

If this volume does not suit you, then you will have to remove two disks at once. If you install Windows, it would be more correct to immediately divide the disk into two media. Moreover, the system will be stored on one, and your personal data on the second. If everything is mixed together, it can often damage the operation of the computer.

But it happens that due to system damage, you cannot even boot your computer. But at the same time, it is vital for you to get your information back from your hard drive. There is definitely a way out. You can connect the hard drive to someone else's computer and transfer all the information. Or just go to a specialist who will help you.

BIOS setup

It is this point that can scare most users who are afraid that they will be able to configure the BIOS correctly. But in fact, there is nothing difficult here. The Bios call button depends on the specific model of your laptop. We'll talk about this a little later. Then, when you see that coveted blue BIOS screen, you need to find the Boot tab, which distributes information about which media the system will be installed from.

That is, it is either a disk or a flash drive. That is, you push the desired media forward. Since many laptops do not have a disk drive at all, below we will talk about how you can reinstall the system without a disk.

Installation without disk

So, as already mentioned, each laptop manufacturer has provided a different choice of software for its equipment. For example, to enter Bios from a Lenovo laptop, you need to press F11, and to do the same only from a Samsung laptop, you need to press F4. Starting the installation requires loading Windows. Only during it you need to press exactly the key that is provided for a specific computer model. As soon as the system has detected your signal, the installation and recovery window will appear.

To begin the reinstallation, you must already have a system image available. It can be easily found on the Internet, but it is more correct to use a license, since no one is responsible for materials downloaded from the Internet. You will need exactly the version of Windows that was already installed on your computer. This can be found on the back of the computer on a sticker. There is also a key that the installer will require.

As soon as you have a disk image, you need to transfer it to a flash drive. Its size must be at least 4 GB. To recognize the disk image, you should download the program in advance. There are a lot of them, but we use Ultra ISO.

It is more convenient and understandable. Through it we find our flash drive and begin to burn the disk image. After this, the standard procedure for logging into Bios follows, which we already discussed above.

Installation this way does not take much time and does not require any special computer knowledge. Therefore, even an insecure computer user can perform it.

windowsTune.ru

Reinstalling windows 7 on a laptop

• home
• We repair it ourselves
• Reinstalling windows 7 on a laptop

Reinstalling windows 7 on a laptop

It is important for every user to know what reinstalling Windows 7 on a laptop is like. Since at a certain point in time, any of us has to deal with the “uneven” operation of the system. That is, failures begin to occur periodically. In this case, the usual system settings no longer help.

The main reason for this is that the laptop operating system is clogged with various unnecessary files or “remnants” of incorrectly deleted programs. In addition, we should not forget about viruses and their “compatriots” in the form of spyware, worms, and so on.

The problem can be solved by using a special program to clean the registry, however, if it does not help, the best solution to the issue is to reinstall the system. In our article, we will tell you what a step-by-step reinstallation of Windows 7 is like on a laptop or computer, and we will briefly describe its main stages.

Don't be surprised if you have to search for and install all the necessary drivers after you decide to reinstall Windows 7 on your laptop. After all, they most likely will not be on the installation disk. Therefore, in order for your ACER or Asus laptop, or any other to fully function, you will have to manually install the missing drivers (for the sound card, graphics editor, motherboard, etc.).

And if you decide to install Windows 7 on your laptop for the first time, be prepared for the fact that this version of Windows consumes much more resources than, for example, XP. That is, if the laptop previously ran under xp, then before installing seven you should compare the system requirements of this version of the operating system and the resources that your laptop has.

We start reinstalling Windows 7 from under the laptop operating system

Now let's talk specifically about the reinstallation process itself.

How to step by step reinstall windows 7 on a laptop? So, if you are the lucky owner of a licensed "seven", then you just need to insert the disc into the CD-DVD drive and run the installation program from it. When a license key is required during the process, we find it on the box of the CD or DVD with the operating system and enter it. And now we have a licensed version of the OS.

License key for reinstalling Windows 7

But what will we do if we don’t have an installation disk? Should I continue to use Windows that is old and cluttered with various “garbage”, unnecessary files and viruses? Naturally not!

There is a way out of this situation. you just need to find and download the required version of the operating system from the Internet. It should be an image of the boot disk. It, in turn, should be launched using a CD/DVD drive emulator program. It is not difficult to find it on the Internet.

After that, insert a blank disc into the optical drive. Using an emulator program, we write the image obtained on the Internet to disk. When the recording is complete, you will have your own installation disk for reinstalling Windows 7 not only on your laptop, but also on your computer.

All this can only be done if your laptop is working properly and has not yet been completely “killed” by virus attacks. If you cannot download the disk image or Windows does not boot at all, then there is another solution to the problem - reinstallation via BIOS.

How to reinstall windows 7 on a laptop using BIOS

How to reinstall Windows 7 on a laptop in this case? Here you should already make some BIOS settings to boot from the installation disk. Next - everything according to the instructions.

Press the power button on the laptop and insert the disc into the drive. In this case, press the DELETE or F2 button several times in a row. If you do everything correctly, a blue Bios window should appear in front of you.

There we find the inscription Advanced Bios Features, go to this menu. Next, opposite First Boot Device, place the CD-ROM. Thus, we select the device in the system that will boot first when the computer is turned on.

Setting up a laptop's Bios before reinstalling Windows 7

That is, now, instead of the computer’s hard drive, the CD-ROM, or rather our boot disk located in it, will be loaded first. Save the settings and press the exit button. Then, after pressing any key, the process of booting the system from the CD-DVD drive will begin. This will be the beginning of reinstalling Windows 7 on the laptop.

After some time, the program will prompt you to select a language. Select, click “Next” and “Install”. In the window that appears, agree to the license terms and select the installation type.

You should be extremely careful here. If you need to do a complete reinstallation of Windows 7 on your laptop, then select the appropriate item in the installation menu. However, it is important to remember that in this case the local disk where Windows will be installed will be formatted. Those. all information on it will be deleted.

After completing the reinstallation process, do not forget about the necessary drivers and software so that the laptop works properly.

Restoring a laptop system from Windows 7 without reinstalling

If you do not want to lose data, then there is an alternative way - without losing the information saved on the disk. Here you should select the “Update” item. This will clear and update the registry and Windows data. Personal information and installed programs will remain intact. Thus, the Windows 7 system on the laptop will be restored, and not reinstalled.

Updating Windows 7 on a laptop without reinstalling

After selecting any of the installation types, the process itself will proceed independently. During this time, the laptop will reboot several times, and the process itself will take about 45 minutes. The desktop will load as evidence that the reinstallation is complete.

On our website you will find answers to many questions related to setting up computers and laptops, setting up a wifi router, tips on how to get rid of a virus, how to connect a network printer, how to install a theme or how to set up a firewall, installing fonts and many others.

We hope that our small instructional article will help you independently understand such an issue as reinstalling Windows 7 on a laptop. If necessary, you can order urgent computer help at home. You can find out how much a certain type of service costs from the price list posted on our page.

In this article I will talk about how to independently install the Windows 7 operating system from a disk onto your computer or laptop.

I offer detailed and step-by-step instructions with a visual demonstration of screenshots of installing the Windows operating system.

If you think that installing an operating system is something complicated and incomprehensible that only a specialist can handle, then I will disappoint you: this is not true. Now you can see for yourself.

All you need to install Windows 7 (or Windows 8) is a computer or laptop, a disk with the operating system (since in this article we will install Windows from a disk), detailed instructions, which I will now provide you with, and, perhaps, attentiveness! Hopefully after installation you won't look like . 🙂

After installation, I recommend installing it immediately. You understand that in our time of electronic payments this is very important. Also now (yet) nowhere without Adobe Flash Player. What's his name Right install read . You may also be very interested in not bad. If you store it on your computer private information, create a .

Important: The majority of all possible problems that arise when installing Windows 7 are associated with an incorrectly prepared installation disk and (or) the quality of the “OS build” recorded on it. You can read the article on how to correctly burn an operating system image to disk.

Remember: if this disc is not out of the box, that is, purchased in a store, then you need to use only original images from Microsoft MSDN. It is the original image, which is just as accessible on the Internet as various assemblies, that is the key to the successful installation of Windows and its normal functioning.

Do not use assemblies of unknown origin. You install all third-party fixes, corrections, and homemade assemblies at your own peril and risk. The consequences may be irreversible.

Before installing Windows 7:

Remember two basic things to do before installing Windows.

First- this is to decide in advance on which partition of the hard drive the system will be installed. As a rule, in most cases this is the C:\ drive. You should remember (or create) the volume label and size.

Remember, your desktop is entirely located on the C:\ drive, or rather, here: C:\Documents and Settings\ Username\Desktop. Think in advance about the integrity and safety of files that are important to you, copy them from your desktop, that is, from drive C, to another drive or flash drive.

All programs installed on the C:\ drive will also be deleted, but this is not a reason to drag the entire folder with programs to other drives. It is much easier to reinstall these programs on a clean system. Don't be lazy, it's not every day that you reinstall Windows.

Second moment - these are drivers for your computer or laptop. They need to be taken care of in advance. Most laptops come with them included, but if they are not available (or need to be updated), look for them on the manufacturer’s official website and download them in advance.

I recommend reading everything you need to know about installing drivers in the article “Installing Drivers or Five Iron Rules,” which is located.

If you skip this important point, then after installing Windows, you may be left without the Internet, because it is not a fact that the Windows distribution will initially contain drivers for your network card.

Installing Windows 7 from disk:

Insert the disk with the Windows operating system into the drive and restart the computer. By the way, if you don’t have a disk drive, you can install the Windows operating system using a regular one.

Let's continue. Our task is to configure the computer to boot from a DVD. This can be done in 2 ways:

• 1. select the device (DVD) in the special boot menu;
• 2. change the boot priority in the BIOS (from HDD to DVD).

The first method, selecting a device in the boot menu, is simpler and more convenient. After installing Windows, there is no need to return booting from the HDD (hard drive). However, on older computers this function is not available and in this case you will have to go into the BIOS and change the boot priority.

Start - reboot, wait until the screen goes dark and at the first sign of the system waking up (the logo appears), press and hold the Delete key on the keyboard. Why the Delete key? These can be the keys F1, F2, F3 + F2, F10, Ctrl + Alt + Esc, Ctrl + Alt + S, Esc.

There is no universal button for entering the boot menu or entering the BIOS, and it all depends on the computer manufacturer (motherboard). The surest way is to read the instructions from the computer or motherboard. The table below shows a clear example of such keys.

The boot menu looks something like this:

Press F10, agree and confirm the exit with saving (Save and Exit) by selecting “Ok”.

Phoenix Award

Let's consider the second interface option. To boot from disk, you need to change the priorities so that the first device is the DVD drive. Find the item “Advanced BIOS Features” and use the arrows to switch to the first device (First Boot Device), change to CDROM.

Press F10 and confirm Save and Exit.

If you have problems at this stage, I recommend watching this video.

Let's continue. If everything was done correctly, we will see the following window with the inscription: “Press any key to boot from CD or DVD.”

Here you need to press any key, for example, spacebar. This is only done 1 time and only at this stage of installation. We see the following window with the inscription “Windows is loading files”.

The files are being extracted, after which we will see the message "Starting Windows" and the Windows 7 installation window itself. Windows installation has begun!!

Select the desired language and click “Install”.

Next, we need to select the edition of Windows 7. Select the one for which you have a key or which you are going to activate. On laptops, it is usually indicated on a piece of paper with a key located on the bottom of the laptop. Entering the serial number itself will be a little later; it has been moved to the end of the installation.

A few words about the possibility of installing a 32-bit (x86) or 64-bit version of Windows. If you have more than 4 GB of RAM (also known as RAM, Memory), then install 64-bit, if not, then 32-bit (x86).

Let's read and agree to the license terms. Next, we need to select the installation type - select “Full installation”.

Now you need to select the partition on which Windows will be installed.

If you have this partition reserved by the system (note, it is still in megabytes (MB), not gigabytes), for example, as in the following screenshot, then select Disk 0 Partition 2.

To avoid such excruciating pain when choosing a partition, before installing Windows, look at how many gigabytes your C drive occupies.

If you have one partition on your hard drive and it is larger than 250 GB, then it would be more correct to create two local disks. One section is specifically for Windows (usually about 50-100 GB), and the other is for storing your personal information (how much will remain, XXX GB).

Note: The partitions you create should be named Disk 0 Partition 1, 2, 3..., not “Unallocated Disk Space”. Otherwise, the operating system simply will not see sections with such names.

If necessary, create a section or sections and click “Apply”:

Attention: At this stage, problems may arise - when Windows 7 asks for a driver for further installation or when the system does not see your hard drive to continue installation.

Or install (if prepared) hard disk controller drivers. If you already have two or more partitions on your hard drive, then you can skip the above point. So, we have selected the “System” section, and now we need to run formatting.

The installer warns that all our data will be deleted. This is what we need, because we are interested in a clean installation of Windows. We agree and wait. Usually the whole process takes a matter of seconds. After formatting, we see that there is more free space, calmly click “Next”.

And here is the beginning of the installation, the process has started. You can already exhale).

We're waiting... Usually it takes 15–25 minutes. When our system is installed, it will prompt you to enter your username and computer name. Let's enter.

If you wish, you can enter a password and a hint. Next, Windows will prompt you to enter your serial number. Enter (if available). If not, then skip this step and uncheck the “Automatically activate when connected to the Internet” checkbox.

Do you want to install Windows 7 on your computer or laptop, but don’t know how? It's not as difficult as it seems. Although the first time, of course, will be difficult. But, once you figure it out, you will become a real “IT master” and will be able to independently install Windows 7 on any computer or laptop.

Before installing Windows 7, print this page. This will make your task much easier. After all, during the installation of Windows 7 there will be no access to the Internet. The only exception is when you have a second PC, laptop or smartphone, from which you can, if necessary, access the site again and see what to do next.

1. You bought a new laptop or computer. Everything is clear here. In most cases, laptops or PCs either do not have any operating system at all, or do not have the one you need (for example, the ancient MS-DOS).
2. You didn’t like Windows 10 or 8, and you want to install the good old “seven”.
3. There was a malfunction, a virus or ransomware advertising banner was caught, the computer or laptop does not turn on, etc.

Let's dwell a little on the last point. If problems occur with your computer or laptop, do not rush to reinstall Windows. Firstly, reinstalling the operating system is done as a last resort when other methods have not helped.

Secondly, remember that after installing Windows, all data is erased, at least on local drive C. And these are all your programs: browsers, video players. And you will have to install everything again.

Thirdly, there are no guarantees that reinstalling Windows will help solve the problem. But the files on local drive C will be deleted permanently in any case.

Therefore, first, try to look for other solutions to restore your PC or laptop. For example, the following articles may help you:

You can also always look for other articles on this blog or through Google/Yandex.

Preparing to install Windows 7 OS

The first thing you need to do before installing Windows 7 on your laptop is to copy all important information. At least from local drive C. After formatting, all data on it will be erased.

If you bought a new computer or laptop, you can skip this step. In all other cases, this is a prerequisite!

Therefore, save all files, documents, pictures, audio tracks and videos from your desktop and from the “My Documents” folder. It is also recommended to look at the local drive C - important information is also written to it quite often. Where to save? On a disk or flash drive. Another option is to upload files to online services (Yandex.Disk, Google Drive, etc.).

By the way, sometimes you can copy some programs along with the settings. For example, bookmarks and passwords from the browser you used.

The second point that needs to be made is to determine what bitness of Windows 7 you need - x86 or x64. Everything is very simple here. If you have 4 GB of RAM (or more) installed on your laptop or computer, then you need to install Windows 7 x64, and if less, then x86.

Why is that? The fact is that the x86 version does not see 4 GB of RAM. The maximum that it shows is 3.25 GB.

How to find out the amount of RAM? If you have a new computer, look in the documentation. And if it’s a laptop, then the characteristics are indicated on its case (or on the box).

If you already have Windows installed, then the amount of RAM can be viewed as follows:

The third thing that needs to be done before installation is to burn a digital copy of Windows 7 to a disk or flash drive.

If you already have a boot disk (bought or given in a store along with your PC), then skip this step.

Burning a DVD is easy. After all, you've probably already recorded films, music, games? This can be done through Nero, Alcohol 120% and other programs.

As for the USB flash drive, there are some difficulties. Therefore, in this case, I recommend reading -.

Where can I get a Windows 7 image or installation disk? Can be purchased in store or online.

And the last thing you need to do before installing Windows 7 is to prepare drivers for your laptop or PC. Driver discs are usually included with your computer. If you have them, then you can skip this point.

Laptop owners are not provided with disks, so you need to install drivers from the manufacturer’s official website (search by the name of your model).

If you skip this step, you may be left without internet. After all, you need to install a driver for it. USB ports may also not work. That is, a mouse. And in the end you will have to go to a friend or acquaintances and download the drivers from them.

This completes the preparatory process. Check again that you have saved all the important data, then connect a USB flash drive or insert a DVD with the Windows 7 installation image and restart your laptop/computer.

Setting up BIOS for installing Windows 7

Perhaps setting up the BIOS is the most difficult stage for most users. Especially for beginners.

In addition, the difficulty here is that the BIOS versions may differ on different PCs and laptops. And the buttons to enter the BIOS too. As a result, some users cannot even enter the BIOS. Therefore, to avoid problems with this, let’s consider in detail what needs to be done and how.

So, when you have prepared everything, restart the computer, and immediately when the screen turns on, repeatedly press the Del button (for PCs) or F2 (for laptops). If you did everything correctly, you will see the BIOS screen. Something like this:

Or this:

There are 4 devices displayed here - First Boot Device (first), Second (second), etc. By default, the first one is the hard disk (Hard Disk or HDD). And you need to put the CD-ROM (disk) or USB-HDD (flash drive) on the first line - depending on which device the seven will be installed from.

How to do it? On a PC, you usually need to highlight the first item, press Enter and select the desired option from the drop-down list.

On laptops, the device boot priority can be changed using the arrows or F5-F6 buttons. Control keys are usually located on the right or at the very bottom of the BIOS screen.

When you select the desired device (CD-ROM or USB-HDD) in the first item First Boot Device, be sure to save the settings and then exit the BIOS. Which save button? This is also written at the bottom of the screen (usually F10).

If you have a BIOS UEFI (new version), then simply drag the desired icon (disk drive or flash drive) to the first place with the mouse and click “Exit” in the upper right corner.

After this, the laptop or computer will reboot and the installation of Windows 7 will begin.

If all this is too complicated for you, there is another option to configure booting from a disk or flash drive without going into the BIOS. For this you can. But this method only works on new PCs and laptops.

Step-by-step instructions for installing Windows 7

Immediately after rebooting, you will see a black screen with a single line.

Here you need to press any button - for example, Space.

If this message does not appear, it means that you did not save the BIOS settings. Check them again. If everything is fine there, then either you did not write the bootable USB flash drive correctly, or the disk is damaged and the computer/laptop does not see it (the disk drive may not be working).

After clicking the button, you will see a black screen with the inscription “Windows is downloading files...”.

Wait for the system to copy everything. After this, a new window will appear on the screen. Select Russian language and click “Next”.

In the new window, click the “Install” button.

If there are several versions of Windows 7 recorded on a disk or flash drive, you need to choose the appropriate one. We have already figured out the x86 and x64 bit depth, so decide for yourself here. As for the version, it is better to choose “Maximum”. Although there is almost no difference between it, “Home”, “Beginner” and “Professional”, so this is not so important. Select the desired item and click “Next”.

Agree to the license terms (check the box) and proceed further.

Choose the full installation.

A window will open asking you to select a partition for installing Windows 7. But here it’s worth going into more detail.

How to partition a disk during first installation?

If the installation is performed on a new computer or laptop (i.e. for the first time), then you will see only one line - “Unallocated disk space”.

And in this case, you need to split the hard drive into 2 partitions - local drive C and D (more is possible, but this is not necessary). To do this, select this line, click the “Create” button, indicate the disk size (in megabytes) and click the “Apply” button.

Don't know how much 50 GB is in megabytes? Write a number at random - for example, 50000. And then see what volume the system will show for the created partition. If it turns out too little, select it, click the “Delete” button, and try again, specifying a larger number.

For Windows 7 to work properly, you need to create a special partition with a capacity of 100 MB where boot files will be stored. So when the next window pops up, just click OK.

When you specify the required volume for local drive C and create it, “Partition 2” will appear. This is him.

After that, select the “Unallocated space” line again, click “Create”, and then the “Apply” button. After this, local disk D (“Partition 3”) will appear.

If you forget to do this, then after installing Windows 7 there will be only one local drive C. And partition D will “evaporate” into thin air. You'll have to reinstall Windows again. Therefore, before moving on, make sure that the “Unallocated Space” option is no longer there.

To install Windows on local drive C, select “Partition 2” and click “Next”.

If you reinstall Windows 7, then the following window will appear on the screen:

In this case, you need to select “Section 2” and click the “Format” button. This will delete all data on it. When the formatting process is complete, select this section again and click “Next”.

By the way, if you want to distribute the volume differently between local drive C and D, you can delete them and create them again, specifying a different size. How to do this is written in the previous paragraph. But remember: in this case, the information will be deleted on the local drive D too! As a result, your PC or laptop will be clean, as if you had just bought it. Therefore, perform this procedure only if you have saved all the necessary files.

Continue installing Windows 7

So, you were able to partition your hard drive or format it before installing Windows 7 and clicked the “Next” button. After this, the operating system will begin to install. Wait until the files are copied.

After this, the computer/laptop will reboot and you will again see the familiar black window with a single line.

Under no circumstances press anything on the keyboard, otherwise everything will start all over again.

After this, the computer or laptop will reboot a second time.

Well, the main thing is already behind us, all that remains is to fill in some fields:

1. Indicate the username and computer name (if you plan to play games, it is better to write in Latin).
   
2. You don’t have to set a password - in that case, just move on.
   
3. If you have a digital copy, you also don’t have to specify the activation key (usually Windows 7 is activated automatically when you connect to the Internet). To skip this step, click Next. And if you bought a disc, then enter here the code that is written on the sticker.
   
4. Here it is recommended to select the “Delay decision” option (you can change these settings later).
   
5. Select your time zone, specify the time and click “Next”.
   
6. If Windows automatically finds drivers for the Internet, then in the new window select “Home Network”.
7. Wait while the desktop setup is completed.
   
8. Congratulations – you have just been able to install Windows 7 on your laptop or computer yourself.
   

What to do after installing Windows 7?

First of all, reboot your laptop or computer, go into the BIOS and change the device boot priority back. That is, put the hard drive (Hard Disk or HDD) in first place, and lower the CD-ROM or USB-HDD to second or lower.

Also, after installing Windows 7, the Internet and USB connectors may not work. This is because there are no drivers. Therefore, at the next stage you install them.

This is precisely why you need to prepare all the necessary drivers in advance before installing Windows 7. Especially for the Internet. After all, how will you download them if you don’t have access to the network?

And one more nuance - when you turn on your computer or laptop, you may see two Windows 7 (during boot).

The first one was installed by you, and the second one was saved in a hidden section (“reserved by the system”). However, the extra line can be deleted. To do this, do the following:

Ready. After the reboot, the second Windows 7 will no longer exist, and you will not see the operating system selection menu.

If you have any questions, ask them in the comments.