If you are the lucky owner of an iPhone, you can also use your gadget as a modem. It is also possible to connect to the network via Wi-Fi, where the device will be an access point, as well as via Wi-Fi.
In this material we will tell you how to enable modem mode on the iPhone 7. Let's see how to use an iPhone and distribute the Internet from it, working with different versions of the operating systems of a PC or laptop.
Note that sometimes telecom operators can block such a mechanism for accessing the network. This means using more than one device. But in Russia this occurs in isolated cases, and residents of our country do not have problems with how to distribute WiFi from an iPhone.
But if you can’t launch the modem function on your iOS gadget, despite all the steps, contact your communications company. Ask if a similar service is available. And our article will tell you how to solve such a problem as modem mode disappearing from the device settings after a system update.
To do this, you need to enter the cellular settings and check that the cellular data transfer option is turned on. If this option is not activated, the desired mode will not be shown in the settings.
If Wi-Fi and Bluetooth are not turned on during the startup process, the system will prompt you to do so. Then it will be possible to use the device as a modem through these channels. Below you can enter your password characters if you plan to use wireless networks.
Now you know how to access the Internet with Phone. In just a couple of simple steps, your device has turned into a device that distributes WiFi.
How to distribute Internet for Windows
Let's start with this “OS” for the reason that it is most often installed on PCs and laptops. In our example, we will use the Windows 10 version and an iOS device with the ninth version of the operating system. However, we note that on devices with other OS versions the steps will be little different.
Internet distributed via USB
To use an iOS gadget as a modem, you must have iTunes utility on your PC. It is important that the USB cord is not a Chinese counterfeit, but an original accessory. Let us remind you about the utility that it must be the most recent version. If these two simple conditions are not met, errors may appear during the process or the connection may not be established at all.
If everything is fine, you will need to activate the modem mode on the device and connect it to the PC via a USB cable. If a request to trust this PC pops up on the display, you need to give a positive answer. Otherwise, the mode will not work. A similar message usually always appears when the device is connected for the first time.
After a short period of time, a new connection will appear on the PC via the local network called “Apple Mobile Device Ethernet”. From now on, the network should be available. To evaluate the connection, you need to click on the corresponding picture in the taskbar. You need to go to the Network Control Center, to the item for changing adapter settings. Here you will find a list of all connections.
How to distribute Wi-Fi from an iOS device
If you have successfully activated modem mode and Wi-Fi on your OS gadget is also turned on, you can use it as an access point. To do this, you just need to connect to the network using the name Phone. You need to enter the password. Which is in the modem mode settings. You can also come up with your own set of characters.
Usually this type of connection is done without difficulty. The Internet instantly appears on your PC or laptop. But provided that the computer interacts with other access points without problems.
We use Bluetooth to connect
In this case, you will need to install pairing in the operating system of your PC or laptop. Of course, Bluetooth itself must be active on both the iOS gadget and the PC. Adding a device is possible using various methods:
- Click on the corresponding icon on the notification item and select the option to add a Bluetooth device.
- By entering the control panel, going to the devices and printers item, clicking on the adding devices section (located at the top).
- Enter the settings, then the devices section, and select Bluetooth. The search will start automatically.
When the iOS gadget is detected by the system, depending on the method used, click on its icon and “Link” or “Next”.
Select creating a pair in the corresponding request on the gadget display. A request will pop up on your PC or laptop to match the secret code with the same element on your mobile device. But you won’t find such a code on the gadget’s display. With all this, you need to answer in the affirmative, and precisely by following this order - first on the PC, and then on the iPhone.
Then go to Network Connections on your PC or laptop and select Bluetooth connection. It is possible that it already exists - then no action is required.
It turns out that not everyone knows that the iPhone 4 with firmware 4.3.x can turn into an elegant 3G/Wi-Fi router. In Apple parlance this is called Personal Hotspot.
There are many situations for its use, but the meaning is the same - to help other devices access the World Wide Web. So let's go to Settings -> Personal Hotspot(or look deeper Settings -> Basic -> Net -> Personal Hotspot).
We turn on the slider, in response we are offered a password, something like head7032. Each iPhone has its own.
From this moment on, the phone raises a Wi-Fi network around itself, to which other gadgets can connect - for example, my iPad (which, although 3G, does not have a SIM card). Call up the list of available Wi-Fi networks, find the one with two “donuts” next to the name of your iPhone, enter the password - and now you’re surfing Twitter, reading news feeds, etc.
I remind you that you must have iPhone 4 + iOS 4.3.x.
By the way, if I ever decide to get an iPad 2, it will be a simple model. Because an iPhone will give me 3G.
Update: Wi-Fi point range is more than 10 meters and 2 walls. While “Personal Hotspot” is enabled, the iPhone 4 only receives EDGE/3G, but Wi-Fi detection is not available.
@ Nikita Goryainov: When there is an incoming call, all devices connected to the point are often cut off from the network. And sometimes the point on the iPhone itself is disconnected from the call; this bug was not fixed in 4.3.1
The ability to transfer data without using wires in the modern world is not an innovation or a luxury. Wi-Fi has become a person’s everyday companion in almost all places wherever he is: at home, in the office, in the gym or in a store. But sometimes, according to the classical law of meanness, there is an urgent need for a source distributed Internet to connect a personal computer exactly in the place where there is no Wi-Fi. What to do? An excellent solution in such a situation would be to use an iPhone 6 smartphone. With simple settings, it can be turned into a mobile modem. So, how to distribute Internet using iPhone 6?
Data transfer methods
There are three ways to transfer data:
- using a cable;
- through creating a modem mode;
- using the Bluetooth function.
If using a cable does not require any special settings - you just need to install iTunes on your computer and connect it from your iPhone, then the other two methods can cause difficulties and require separate consideration.
Let's turn iPhone 6 into a modem, description of settings
So, to turn your iPhone 6 into a modem that can easily distribute wireless Internet around you, you need to:
- In the phone menu, find the “Settings” section and click on the “Cellular” item. In the window that appears, enable support for 3G or 4G networks. This will maximize the data transfer speed.
- In the same “Settings” section, look for the “Modem mode” item and activate its operation. From this point on, the iPhone 6 becomes a hotspot as a modem, providing distribution wireless Internet around you.
Click Settings 
In the window that appears, enable support for 3G or 4G networks 
Settings if there is no “Modem mode” item
If for some unknown reason there is no “Modem Mode” item on the iPhone in the “Settings” menu, then you should not be upset about this. There is another way that solves the issue: “ How to enable distribution Internet on an Apple smartphone?:
- In the “Settings” menu, find the “Cellular” item and click on it.
All basic information about cellular communications is reflected here. oniPhone 6 and its parameters. All this data can also be found on the official website of the cellular operator that is used to operate the phone.
- In the dialog box that opens, we find three sub-items: APN, “Username” and “Password”.
The values contained in these subparagraphs must be remembered or written down.
- Find the “Modem mode” sub-item below in the window that opens.
We copy into it the data from the previous paragraph that we remembered or wrote down.
- Go to the general “Settings” menu.
Here, after changes are made to the “Cellular Communications” item, the “Modem Mode” item we need will appear.
If you enter the item that appears, you will see that the activation slider will be in the disabled position by default. Below it there will be a window with instructions explaining how to distributeWi— Fi and the steps that need to be taken to achieve this.
How to set a security password
You can block outside connections using a password. In order to install it you need:
- In the “Modem Mode” item, find the “Wi-Fi Password” sub-item and click on it.
- In the window that appears, using the pop-up keyboard, enter a code word or number consisting of at least eight characters.
Now, in order to use the iPhone 6 modem on a computer, you will need to not only find the network, but also enter a secret word or number.
iPhone settings for data transfer via Bluetooth
Of course, this procedure is rarely used, but in some cases it can be useful. So, to connect to your phone modem via Bluetooth A special module and drivers must be installed on the computer. Next, enable modem mode on the phone and perform the following steps:
- On the computer, in the “Devices” tab of the control panel, find the “Bluetooth” item.
- In the list of appeared names of devices operating within the radius of the module, find the name iPhone 6 and press the communication button.
- We confirm the request to create a connection on the smartphone screen.
- Enter the password on the computer.
All. Internet access on the PC will be provided via Bluetooth.
Conclusion
Thus, with the help of easy and simple manipulations you can sixth Turn your iPhone into a mobile modem and solve the problem: how to distribute Wi-Fi from iPhone 6. The ability to access the World Wide Web via mobile Wi-Fi will indicate the correct implementation of all the necessary settings.
It is worth noting that working as an Internet access point drains the iPhone battery as quickly as possible. The battery charge will also be affected by the number of connected devices. The more there are, the more it will be discharged.
How many times does it happen that you have a computer, you need to connect to the Internet from your PC, but there is no way to log in via Wi-Fi. What to do then? Is it possible and how to distribute Wi-fi from an iPhone?
Apple iPhone 6 can be used not only as a phone, but at the same time as a modem, while distributing the Internet within the range of your network.
This process can be achieved quite quickly by following a number of simple steps. Apple smartphones for iPhones 4s, 5s, 6, 6 plus and 7 will also be able to distribute modem mode on the iPhone 6. You can also distribute the Internet to other Apple devices and to any phones, as well as tablets and computers. In turn, other devices such as iPad, Android phones, tablets and computers are also capable of distributing the Internet like a modem.
Having a SIM card for accessing the Internet at high speed from network operators such as MTS, Tele 2, Yota or Beeline, or other mobile operators, using your iPhone you will be able to activate a Wi-Fi access point. Of course, it’s good if you have unlimited Internet, otherwise the traffic will quickly be used up and all the money on your phone account will be spent.
You just need to know how to enable modem mode on the iPhone 6. You can connect your iPhone as a modem when you need to help friends if they have run out of traffic on their phone or connect a laptop to the Internet while on the road. The good news is that setting up an Internet access point will take just a couple of minutes, unlike stationary routers and removable modems.
You can distribute the Internet from your iPhone to any device in different ways: via wireless WI-FI mode, using the Bluetooth function, via a USB cable to a tablet device or PC. Of course, it is certainly more convenient and faster to transmit via Wi-Fi wireless mode.
Let's consider the option of how to distribute the Internet using WI-FI. In order to solve the issue of how to set up and connect modem mode, how to distribute wifi from iPhone 6, read the following connection procedure. Open the main menu of your smartphone screen and go to the “Settings” of the phone, then go to the “Cellular” section and select the “Cellular Data Network” function. Next, enable “Modem Mode” by first entering the secret password. It is necessary to indicate your possible access point for the connection network when the password has not been entered previously, otherwise the connection will occur automatically.
The name and connected access point from your smartphone will appear on the receiving devices. That is, a so-called virtual modem will appear in the connected device, through which you can additionally launch a PC or other device to the access point on the iPhone. In this case, you need to use the Wi-Fi password, where it is visible in the settings.
If your friends want to connect their smartphones to your iPhone 6 in order to receive Internet distribution from the iPhone in Wi-Fi mode, and your distributing iPhone 6 is already configured for a modem, they can set up a Wi-Fi access point in their smartphones, and you need enter the secret access password you created and confirm activation.
When you connect other devices to your smartphone, you will read a message about this on the status panel. By the way, please note that the mode of the connected Wi-Fi modem is not displayed on the screen. Therefore, the battery in the distributing smartphone can discharge very quickly.
Know that you can distribute high-speed Internet from one source and to several devices at once: iPhone, laptop, iPad and up to 5 more devices at the same time!
The rate of battery discharge will certainly be affected by the number of receiving instruments connected to the network. The more there are, the faster the distributing iPhone will run out.
If you need to change your Wi-Fi network password, go to Settings again, go to Modem Mode and set a new Wi-Fi password.
In this case, the selected Wi-Fi password code must contain at least eight ASCII characters. Other characters will not work, since other devices will not be able to connect to your access point in this modem mode. Characters that will not work are language characters from Japanese, Chinese or Russian. ASCII characters are:
- Upper and lower case letters of the English alphabet;
- Arabic numerals from 0 to 9;
- other punctuation marks.
Be aware that with future phone firmware updates, cellular data settings may be reset, so “Modem Mode” will again drop out of the menu settings.
Is it possible to do something if you were distributing the Internet and suddenly the modem mode on the iPhone began to disappear by disconnecting all additional smartphones from the network?
But it happens, on the contrary, that you updated the iPhone program to iOS 8.1 or 9 and the modem settings on the distributing iPhone failed, and the device reports that the modem mode is unavailable.
Sometimes the modem mode simply disappears and does not work, and sometimes the download does not occur and the modem constantly freezes when connected persistently.
Don't think that the dial-up service has disappeared or been deleted. When connecting, it is as if the six simply turned off the modem function by default, deciding that the owner of the device does not use this service. In fact, this function has ceased to be enabled in order to avoid the company’s liability for the operation of the modem connection service, taking into account the specific settings of various Internet companies, as well as operators in different countries.
Most users, without hesitation, constantly connect their iPhone 6 as a modem to different devices, so locking this function causes indignation among users due to the inability to solve current problems. This problem can also be resolved by restarting the modem.
Removing modem mode
A lost modem can be restored using the process of deactivating the modem mode in the iPhone 6 or iPhone 6S, which is quite possible if iOS 9 is installed. In this case, the subscriber must first turn on the modem mode, then manually enter the parameters of his immediate operator, for example, the Beeline operator must be written down - Beeline , Tele 2. In this case, the order of entering settings must be performed clearly in a certain sequence.
If, nevertheless, when connecting to your network, the message “Unable to connect to the network” appears on the screen, you need to eliminate the body of the problem that is preventing the connection. To do this, take the following steps step by step.
Not everyone knows that iPhone 4/4s with firmware 4.3.x or higher can turn into an elegant 3G/Wi-Fi router. In Apple parlance, this is called “Personal Hotspot” (you can learn about setting up 3G on iPad and iPhone in this article).
So, go to Settings -> General -> Network -> Personal Hotspot.
If you don't see the item "Personal Hotspot", go to Settings -> General -> Network -> Cellular data. In the window you need to fill in the column “Modem mode”. The settings can be obtained from your mobile operator.
We turn on the slider, in response we are offered a password, each iPhone has its own.
From this moment on, the phone raises a Wi-Fi network around itself, to which other gadgets, such as an iPad, can connect. Call up the list of available Wi-Fi networks, find the one with two “donuts” next to the name of your iPhone, enter the password - and now you’re surfing Twitter, reading news feeds, etc.
Modem Mode settings for K-Cell subscribers
APN: internet Username
For Tele2 subscribers
APN: internet.tele2.kz Username remains blank Password remains blank
