Reindeer meter from Jove for WoT. Reindeer meter from Jova for WoT Download deer meter for here 0.9 14

Updated (13-05-2019, 10:31): official version XVM-7.9.0 for WOT 1.5

XVM-7.9.0:
[GENERAL]
* World of Tanks 1.5.0.0

[THE BATTLE]
* adaptation for the battle mode "Front Line"
* sections updated:
"battleLabelsTemplates"/"hitLogHeader"
"battleLabelsTemplates"/"hitLogBody"
"battleLabelsTemplates"/"totalEfficiency"

[CAROUSEL]
* macros removed: ((v.rankCount)), ((v.rankSteps)), ((v.rankStepsTotal))

This addition is very relevant. With its help you can find out:

• Red - bad;
• Orange - below average;
• Yellow - medium;
• Green - good;
• Turquoise - very good;
• Purple is a master.

How are these ratings deciphered?

• Winrate - percentage of wins;
• EFF - efficiency rating;
• WN8 - one of the wot-news ratings;
• XVM - two-digit efficiency rating;
• WN6 is another type of rating from wot-news;
• WGR - personal player rating from Wargaming.

What else is included in the XVM mod kit?

• It indicates the places where enemy armored vehicles were last seen. Using this, you can arrange a hot pursuit, if, of course, your team wins.
• Names of equipment.
• The overview of your tank is indicated in the form of a circle.

In what cases is a reindeer meter useful?

If you chose a heavy tank, and "" threw you into the top, urgently look for allies from among the medium tanks and "petashki" for cover. In a couple of phrases, indicate your intended actions; to be safe, indicate the square where you are going to break through.

From gaming observations. Very often, players like to blame everyone but themselves. “Where has everyone gone? Why didn’t anyone cover for me?” Who asked for this at the beginning of the battle? Only wizards who live in “Allods” can read the thoughts of other people (but that’s another story).

How to install the Olenometer correctly

How to activate XVM deer meter?

XVM - Config from Ms_Ramis - this is not just a mod, it is a complex mod that changes the interface and is designed to be useful and functional in combat, but at the same time does not affect FPS

Hello guys! In this article we will tell everyone about the benefits that one single mod in the game World of Tanks, which received the unique name XVM, can bring. And it’s not for nothing that this modification is considered one of the best, because the development team did their best and created a simply excellent thing, which was called the “deer measurer”. What does this mean? Everything is very simple, thanks to the reindeer meter during the battle, each player can see what percentage of victories all gamers have and, moreover, find out whether their team will win or not. After all, even before the start of the battle, the addition shows what percentage of allied teams will win, and this helps a lot, because it shows what strategy is best to use in battle. In addition to this, the mod contains a lot of other cookies that everyone can’t help but try and want to install.

Modification Deer gauge

As for the operation of the modification itself, we cannot help but talk about the fact that its interface is quite pleasant and convenient, which not only does not interfere during combat, but all the necessary information is in plain sight. The indicators are colored in colors that directly depend on the victory rate, which helps to visually assess the situation in which you will have to play in a few seconds even before the start of the battle. It is impossible not to notice that the percentage showing the probability of victory in battle is quite accurate and can only be wrong in some cases. Therefore, if before the start of the battle it shows 30%, then it immediately becomes clear that everyone will have to pull and only in this case is victory possible.

In addition to the reindeer tracker, the mod also includes such useful things as various game markers above tanks. There are a very large number of them and each player will be able to choose what he likes. Very useful in battle is the log of damage dealt to opponents, which will show how effectively you play right in battle. Another useful bonus for everyone will be a log of the damage received, from which you can find out who hit you and by how many units of strength. In addition to this information, you can see the type of projectile that caused damage, which also gives an additional advantage in each battle. Players will definitely be happy with the new light bulbs, which can replace the already boring standard ones. Thus, the game will become more beautiful, attractive and pleasing to the human eye. And another useful, but not the last, feature in this mod will be the display of player markers on the map and the direction of each gun.

Mod "User Meter"– shows the statistics of players in battle with three indicators: the player’s win percentage and his rounded efficiency rating, the total number of player battles. The win percentage is displayed across all of the player's armored vehicles. Efficiency rating is a qualitative characteristic that determines the effectiveness of a player’s actions in battle. You can calculate your rating at. The data is displayed on the battle loading screen, when you press the Tab button, in the middle and long list of commands (“ears”). Table of performance rating values:

less than 600 - Bad player (~6%)
600 – 900 - Below average player (~25%)
900-1200 - Average player (~43%)
1200-1500 - Good player (~22%)
1500-1800 - Great player (~3%)
more than 1800 - Unicum (~0.5%)

In this material you will learn how to download, install and configure the reindeer meter mod from Jove, which is part of XVM.

Let's first understand the terminology. Jov is primarily a streamer and blogger, and his modpack is run by completely different hired people who simply collect various mods from other authors in one convenient installer. So saying " reindeer surveyor from Jova"we don't mean that Jove made this mod, but only that you can download and install the XVM configuration the same as Jove uses.

How to install the deer meter from Jove?

Before you start: It is best to perform these actions on a game client that is clean from mods. To do this, you need to clear the res_mods/1.6.0.0 folder from everything contents in it. Also, looking ahead, if you encounter glitches, try.

In order to use the Jove deer meter, you must complete the following steps:

1. Run the installer, follow the prompts, in one of the last steps you will be asked to select the mods you want to install. Towards the end you can see XVM - this is the deer meter:

Just check the boxes for the elements that you want to put into the game. Be careful, some mods can reduce performance, which will be especially noticeable on weak computers.

How to set up a reindeer meter?

Let's say you have installed everything, everything works, but you want to change something. To do this, there is no need to go into the configuration files, since it is enough to re-run the Jove modpack installer and disable/enable various functions. In this case, it is recommended to clean the mods (this function is in the installer itself, it will ask you this at the very beginning).

How to activate statistics and chances of winning?

It's very simple, exactly the same as for a regular XVM mod:

1. Go to the official website of the XVM mod - http://www.modxvm.com
2. In the upper right corner there is a “Login” link - log in to the site using your Wargaming ID.
3. After logging in to the menu, a menu will become available with which you can:
   • activate reindeer meter;
   • update your statistics;
   • in the settings, select whether to show the chance of winning, select the rating displayed (WN8, WG, xTe, etc.), select the flag displayed next to the nickname, etc.

XVM or “Deer Messenger” is the oldest, most complex and functional mod for World of Tanks. With its help, you can change any elements of the game interface, from inscriptions above tanks in battle to statistics in the hangar.

Composition of Olenemer

Markers above tanks

XVM allows you to add almost any information about the player and his combat vehicle to the marker above an ally or enemy tank. Thanks to the standard ability to enable advanced marker mode using the Alt button, the possibilities are doubled. For example, here is a screenshot of the marker in the custom configuration:

The marker, in addition to the Tiger I tank model, shows the current number of frags: “2”, WN8 rating: “525” and the player’s win percentage on this tank “52%”. Also visible is a separate mod not related to XVM.

At the same time, information on the same player in the pre-battle screen and allies information panel is displayed in a different format: tank model - number of battles on the account - Efficiency Rating (ER, Efficiency) - percentage of victories on the account.

Marker settings are located in the files:

• markersAliveNormal.xc - standard mode
• markersAliveExtended.xc — view of the marker with the Alt button pressed
• markersDeadNormal.xc - marker for a destroyed tank
• markersDeadExtended.xc - extended mode using the Alt button

Description of macros for displaying information in battle is in the file macros.txt

Damage log

Hitlog or hit log allows you to control the amount of damage dealt to enemy tanks. This feature can be useful for completing personal combat missions or earning Main Caliber medals. The damage counter is usually located under the score panel and can show both the total for all targets and for each target individually. Macros can also be widely used here, which allows you to find out in detail who you shot at, how many times and with what result. The configuration is in the hitLog.xc file

Replacing the “light bulb” of the sixth sense

The trigger icon for the commander’s “sixth sense” skill is replaced with an arbitrary picture using XVM, not just, but very simply. Just put a file in *.png format in the res_modsxvmres directory and name it SixthSense.png Then, instead of a standard light bulb, when illuminated, you will see your picture. For example, like this:

The screenshot also shows non-XVM mods: an improved standard sight and a minimal tank information panel in the sight (only viewing and reloading).

Customizable player panels, stats table and loading screen

Command Information Bars (Ears) Options

Found in the playersPanel.xc file. Here you can set the following settings:

• Transparency of the background of “ears” and tank icons
• Displaying clan and platoon icons
• Enemy Detection Status— allows you to configure indicators for unexposed enemies, for those who are exposed, and for those who have been detected but are not visible at the moment.
• Displaying information about allies and enemies in the “ears”. The most important part of this category of UI changes is allowing you to choose what you see in the medium and wide ear modes. Here you can also add various macros with ratings, number of frags, percentage of wins on the player’s tank, etc.

Statistics table

Displayed on the screen in battle using the Tab button. The settings are in the file statisticForm.xc. The information display capabilities are similar to the “ears”, plus, you can enable the calculation of the chances of winning.

Loading screen into battle

Or the pre-battle screen. Its settings are stored in battleLoading.xc and are also similar to the capabilities of the “ears” and the statistics table.

All three of these elements of the combat interface are designed to give you information about opponents and allies, which you can’t help but take advantage of. Try different combinations of settings and macros. Keep in mind, however, that all ear modes, stat tables and pre-battle screens can show different information as you choose.

Icons of clans and players

XVM by default includes icons for clans from the top 150, and also allows users of the mod to set their own icons for other clans and even for individual players. The latter feature gives you the ability to tag and spot friends or enemies in battle.

To customize your icon for a clan or player, you need to:

• Go to res_modsxvmresclanicons
• Select your game cluster, for example RU - if you are in Russia or Ukraine
• Select the clan or nick folder depending on whether you want to add your icon to a clan or a player
• Place a picture in *.png format and a name that repeats the lantag or player name, for example: ABLE.png or Jove.png

Please note that only you will see the added icon. To be among the clans for which icons are displayed by default in XVM, you need to be in the top 150 clans in your region. It is basically impossible for individual players to add their own icon for distribution along with the Olenemer.

Modified base capture strip

A well-known interface change for players. Instead of the abstract base capture points of the standard client, you will see the number of invaders and the time remaining until a successful capture.

The settings are in the file captureBar.xc

Smart minimap

Also an extremely popular mod, for which we even had to make an alternative - for players with weak computers. The minimap is configured using several XVM configuration files:

• minimap.xc - transparency and zoom in/out of the minimap
• minimapCircles.xc — setting viewing circles and artillery range
• minimapLabels.xc - allows you to change labels on the minimap, add icons, various text, vehicle signatures, etc.
• minimapLines.xc - direction of your tank's gun, direction of the hull, horizontal aiming angles, direction of the camera's field of view

It is also worth watching the video on setting up the minimap:

Hangar mods XVM

Allows you to customize various elements of the hangar and the game entry screen.

• login.xc - configures the World of Tanks login screen: allows you to skip the start video and watch the ping to the servers before logging into them
• hangar.xc — hangar parameters. Shows ping to game servers, calculates personal rating and other improvements on the “Achievements” tab
• battleResults.xc - battle results window or “post-battle screen”. Allows you to show net income in silver, experience, hit percentage, damage dealt and chances of winning

How to install the Deer Meter

There are two options for installing the Deer Gauge.

1. Manual installation

• Download the archive with a comprehensive XVM mod from the link below
• Unpack the res_mods folder from the archive into the root directory of World of Tanks
• The deer meter is installed in the default configuration and, after activation, is ready for use.

2. Installation using XVM Updater:

XVM Updater is a program for automatically downloading, installing and updating the Deer Measuring Tool. To automatically install the Deer Meter with a ready-made configuration:

• Download XVM Updater from the link below
• Run the executable file - the program does not require installation

• Select the XVM version to install. We recommend Stable if you are not a mod developer.
• Select a configuration. We recommend “Default with ER” - standard, displaying a 4-digit “Efficiency Rating” or “COP”.
• Click “Install/Update” and wait until it’s finished - Deer Meter is installed

How to activate Deer Meter XVM

After installation, Deer Meter must be activated, otherwise functions related to player statistics will not work.

• Go to the official XVM website
• Click “Login”, select your region and log in using your game username and password
• Click “Activate statistics” - the mod is ready for use

The operating time of the Deer Messenger after activation is limited, so we recommend that every time you enter the game, in the “notification center” you read a message about the status of XVM, the availability of network services and the availability of mod updates. If necessary, re-activate according to our instructions.

How to configure XVM config

You can configure the Deer Meter manually or using a special program.

1. Manual setting

• After installation, open the res_modsxvmconfigs folder
• Rename xvm.xc.sample to xvm.xc
• Open res_modsxvmconfigsdefault folder
• Edit the settings of the combat interface elements you need. The files are provided with hints for all parameters. Description of macros in battle and in the hangar is located in res_modsxvmdoc in the files macros-hangar.txt and macros.txt

2. Configuration using XCTuner

• Download XCTuner from the link below
• Unpack the archive and run the executable file - the program installer
• Select the installation folder, create a shortcut on your desktop, click “Install” and wait for the installation to complete
• Launch XCTuner; specify the path to your Olenemer configuration file, for example C:GamesWorld_of_Tanksres_modsxvmconfigsxvm.xc

• Make the necessary settings in each section; don't forget to click the "Save" button
• When finished, close the program. The Deer Meter configuration is configured.

How to update the Deer Meter

1. When updating manually:

• Go to res_modsxvmconfigs
• Find the main file with your configuration and the folder where all the settings are stored
• Copy the file and folder to any location on your computer
• Download the latest version of XVM, install using the instructions above
• Copy the saved config to the folder with the updated mod - Deer Meter updated

2. Using XVM Updater

• Download the program from the link below if you have not already done so
• Run XVM Updater
• Check the box "Keep old XVM config"
• Click "Install/Update" and wait for it to finish
• Reindeer meter has been updated, you can play