How to decode channels. How to open encrypted digital television channels

In this article you will learn how to decode the Tricolor receiver to gain access to watching paid channels.

The error occurs for many reasons:

• The installed new equipment is not registered with the provider and the keys have not been received;
• There is no activation of the subscription - the subscription has expired or the funds in the account have not been transferred to account for the renewal of the subscription;
• Activation keys are out of date due to prolonged shutdown of the receiver;
• Problems with the smart card (incorrect installation, faulty card reader, broken card chip, outdated receiver does not read the card);
• The software version is out of date;
• Software failure (power surge, updates installed incorrectly).

With an existing subscription to paid channels, the user must deposit funds into the account on time to enjoy watching their favorite channels. If the source of the problem is software problems, then you should look for another solution.

Independent channel decoding, its dangers

Independent decoding implies legal or illegal actions. If you take legal steps, you must deposit the required amount of funds to subscribe to paid channels. If funds have been deposited and there is no paid channel broadcasting, you should complete the decoding scheme by obtaining new activation keys or official software.

Illegal decoding involves the use of pirated software or other methods that allow access to paid channels. Some clients do not want to pay money and resort to using hacking programs that decode the paid channel. But the use of such files and programs can harm not only Tricolor equipment, but also the TV. Also, if there is a warranty, the free service period will be reset to zero.

Legal decoding of Tricolor channels

• Disconnect the device from the network for 5-10 minutes;
• Connect to the network and turn on the receiver to an encrypted channel;
• Leave the device turned on for 6-8 hours.

Another option is to perform a factory reset:

• Go to the device menu and select the “Settings” category;
• If a PIN code is required, enter the appropriate combination (or 0000) and point to the “Factory settings” position;
• When prompted to return to factory settings, click “Yes”;
• When finished, turn off the receiver from the network and turn it on after 5-10 minutes;
• Update the channel list with a new search;
• Save found channels.

If broadcasting does not resume, then you need to send activation keys yourself from your personal account (Tricolor website) or call customer service. After sending the keys, leave the receiver in the on state for 6-8 hours.

Independent channel decoding

If they want to watch paid channels for free, some users resort to illegal measures to solve the problem.

Pirated software

The user searches the Internet for special plugins that crack the encoding of a television signal. In this case, the decoding instruction represents a step-by-step execution of steps:

As a result, the broadcast restriction is lifted.

Cardsharing

The method involves using the Internet to obtain activation codes. The company's client purchases an official card and activates a subscription to paid channels. When using auxiliary equipment continuously operating on the network, it begins to distribute the received keys to users who have paid to receive identification keys.

The person who distributes is considered the cardsharing provider. Distribution takes place through a special server.

The recipient of the keys must, after paying for the service, configure the connection of his device to accept the necessary combinations via the Internet. But the TV signal still comes from the dish.

For such a service you need to pay less when compared with the possibility of connecting to a service package from Tricolor.

Re-flashing the receiver (smart card emulation)

There is a decoding method that involves flashing the device by entering a specific key into a special emulator. It is a software simulation of a smart card. The encoding emulator is not available to the average user to avoid widespread access.

To use this method, you need to know the model of your receiver. After this, you need to find the key to turn on and enter the emulator. These keys are searched on the Internet. Different receiver models have their own input scheme to the emulator.

Editing keys.

By pressing the required buttons in sequence and entering the required code, the user opens the emulator menu. There you need to find the tab with the encoding that you want to unlock.

Currently, several encodings are known for television broadcasting - Biss, Viaccess, Irdeto, etc. After selecting the encoding (Biss encoding is considered popular), the key combination is entered using the remote control. After time has passed, the channel is unblocked. Emulation allows you to decode multiple encodings and multiple cards.

Each Tricolor subscriber chooses the appropriate decoding method. But first it’s worth weighing the pros and cons.

There are three options for viewing scrambled channels. First, pay honestly. Then you can watch everything fearlessly and for sure. But not everyone has the desire to pay a monthly subscription fee. Therefore, there are two more viewing options: through an emulator and sharing. As for NTV+, the sale of pirated cards flourished for more than 2 years thanks to the sloppiness of NTV+ (according to rumors, the management, knowing about the change of owner, received money not so much from subscribers as from large sellers of satellite equipment). As a result, NTV workers chose the most effective way of fighting - technical. So you can forget about free viewing for a very long time. The problem, however, is not just pirates. The point is in the behavior of NTV people themselves. If in France the monthly fee is $60, then this is normal. But in Russia? So, in reality, the pirates were raised and nurtured by the short-sightedness and monopolism of the NTV+ management. They could have more than one million subscribers if the monthly fee were two or three times less. Then no one would want to turn to pirates, since it would be a waste of time and money.

What is a card for viewing encrypted channels? Official cards and unofficial Gold Wafer (gold wafer), Pic2, Fun, Opus, Cerebro, etc. similar to our telephone cards. There are also slightly different Pic cards (peak cards) and FUN cards. The card houses the processor and memory. We mainly use cards like telephone cards, since they have recently become quite cheaper (if a receiver like Humax or Samsung is used). A program for working with the tuner is loaded into the processor from a computer using a programmer, and firmware with codes for foreign providers is inserted into the memory. Each foreign provider (service provider) launches its own packages, consisting of a certain number of channels and opened with one or more codes. A maximum of 16 providers can be loaded into a Pic card. In a Fun card - up to 40. If the code is changed, the card stops opening these channels. This means that you need to reflash the card again. You can also embed several encodings onto the Fun card (if the tuner supports it). But now this is a thing of the past since all new brands of receivers come with emulators.

Updating Fun cards for 5 in 1 or 6 in 1 tuners is a thankless task. Everyone changes codes as they want and as they can. Therefore, if you want to look at a lot of encodings, buy a programmer, learn how to use it and find codes or ready-made firmware on the Internet.

But there are commercial cards whose manufacturers themselves are engaged in hacking official cards. Otherwise, why take 100 USD? for a card? Naturally, the card data is well protected. And, as a rule, they come with several packages that neither simple cards nor emulators have. Then the next “super card” appears, and so on. Therefore, the costs of such viewing are not small at all, and they are not widespread. By the way, you also need to buy a programmer for them (about 50 USD). Sharing is much simpler and cheaper.

Recently, there has been a process of replacing conventional tuners with tuners with the so-called emulator. That is, with a built-in map. It is clear that the capabilities of the receiver far exceed the capabilities of any card. Accordingly, on these tuners it is possible to both automatically update the keys for the Nagravision encoding, and enter the keys for all hacked encodings directly from the remote control. Neither a card nor a programmer is needed for this. But it is also very difficult to protect information in the receiver. More difficult than in the map. Therefore, if it appears on one, it will appear on the other. So there is almost no commercial hacking on the part of receiver manufacturers. In fact, receivers with emulators can already be characterized as having passed the stage.

Let's face it. The further you go, the fewer channels you can watch without a subscription fee. At one time, watching a large number of channels was caused primarily by a war between the owners of coding systems, who leaked information to everyone. Now hacking is commercial and pirates are releasing their own cards like Cerebro, Opus, etc. They are a lot to look at, but not cheap. The card costs about 100 plus the programmer about 50. Then the information can appear for everyone, but there is very little time left for viewing. Therefore, emulators themselves are simply not promising.

Currently, channel viewing via sharing is gaining increasing momentum. What is sharing? This is a package viewed by many receivers using one official card. This can involve both the Internet and just a home network. At the same time, the cost of the monthly fee will be small, since it is divided among all subscribers, and there can be a LOT of them. Moreover, any package is available for this viewing. What is needed for this? Appropriate equipment and a desire to learn new things, since many questions also arise in the technical plan of implementing the connection of the receiver to the server. It is possible for providers to combat this, but it is difficult.

Tricolor TV is one of the leading companies in the field of digital telecommunications. Numerous customers can enjoy high-quality digital television and a fairly extensive list of thematic packages. However, sometimes it happens that channel encoding unexpectedly occurs, and instead of the usual programs, the TV only shows the words “Encoded channel (DRE)” or “No access”.

What to do in this situation and how to decode Tricolor TV channels yourself

There are several reasons why encoding of a channel or all TV channels at once may occur. Having identified it and eliminated it, you can independently adjust the operation of the receiver without turning to a specialist for help.

Prices in 2019 for Tricolor TV service packages range from 6 to 12 thousand rubles. This is a considerable amount that not every user can afford. Therefore, they increasingly began to use specialized programs to decode channels that hack the receiver, which happens thanks to a virus.

But it is worth remembering that the virus can also negatively affect the entire system, including the TV.

Reasons and their solution

Reasons for channel encoding:

1. The first reason for encoding occurs is a late payment for Tricolor TV services. A bill not paid on time entails turning off television broadcasting and, as a consequence, channel encoding. After making the payment, this problem should disappear. It is important to remember that when paying, you must specify channel packages. Therefore, it is recommended to monitor your balance very carefully. The most convenient way to do this is in your personal account on the company’s website or through an online service.
2. When ordering a service that you have not used before, pay attention to whether your tuner can support the desired format. If not, then you will again encounter the coded channel problem. For example, the “Maximum” channel package can only be played with equipment that supports HD.
3. If there is no connection between the receiver and the satellite for a long time, the problem of inoperative channels may also arise. This may occur due to lack of power. In this case, the receiver will not receive activation keys for paid channels and simply will not be able to connect them. A similar situation may arise if, after payment, the tuner was not connected to the satellite dish. You can solve this problem by turning off the receiver for one minute, then turning it on and finding a free channel to make sure the equipment is working. After the picture appears on the screen, go to one of the paid channels and wait until it connects. In some cases, the period for obtaining activation keys reaches eight hours.
4. It is not uncommon for your favorite channels to disappear due to unfavorable weather conditions. Unfortunately, it will be possible to improve this situation only by waiting until the elements calm down.
5. An outdated receiver model can also cause channel encoding.

The easiest way is .

Or connect

Satellite television has long and firmly entered our lives. This is especially true in places where there is no access to cable TV. As for terrestrial television, not everyone is satisfied with the small number of channels, and the quality of reception is not high enough everywhere.

Some satellite channels are transmitted by their creators in encrypted form. In this regard, many users wonder whether how to decode satellite channels? The easiest and most legal way is to purchase a special access card from your provider. But this option does not suit everyone. It is especially unacceptable for lovers of freebies, which can safely include the majority of the population of our country.

This category of users thinks about how to decode satellite channels for free. It must be said that most of the encrypted channels are transmitted to the territory of the Russian Federation illegally. Therefore, the question of the legality or illegality of their illegal decryption is controversial.

The easiest way decode satellite TV channels when viewing them on a computer. To do this you will need a DVB board and software for it - ProgDVB. The MD Yanksee and s2emu plugins are installed in the ProgDVB root folder. With their help you can decode satellite channelsBISS and Cryptworks formats. New keys for each channel are downloaded from the Internet.

Most modern satellite receivers allow you to view channels. To decode satellite channels, keys must be entered when the emulator is turned on. Some receivers already have a BISS item in the menu. In others, entry into it is provided through a special code.

Some channel packages (NTV+ for example) are quite difficult or completely impossible to decode. Let's talk about how to decode satellite TV channels, which cannot be decrypted using softcams or plugins. To decode them, an access card is required. A fairly simple, but not entirely free way is sharing. The essence of the method is that one of the subscribers or all together buy one access card. Then it is installed in a special device - a reader.

After this, all that remains is to create a server that will distribute decryption keys to clients. The computer or receiver connects to this server via the Internet or local network. The system will assume that each connected device has an access card installed. With this method, the cost of watching channels for each subscriber drops tenfold.

Satellite television makes it possible to watch a huge number of both Russian and foreign channels. To do this, you just need to correctly configure the receiver (the device that transmits the signal from the satellite to the TV) and enter the channel codes.

You will need

TV;
- receiver;
- channel keys.

Instructions

Other news on the topic:

Every time you try to unlock the TV, remember, or better yet, write down all your actions.

If coding of TV signals had not been invented, we could watch dozens and hundreds without spending a penny on it. However, this fabulous life is not destined to come true due to the fault of channel owners who use various encodings in order to deprive us of the most interesting TV shows. Fortunately, some encodings can be decoded. These include the biss encoding, which is so easy to decode that it seems like a mere formality.

Black screen Other data must be entered in decimal form. Sometimes they are presented in hexadecimal (0xХХХХ). In this case, convert them to decimal form using the Windows calculator, opened in the “engineer” (Windows XP) or “programmer” (Windows 7) view. If the keys are in decimal form, there is nothing wrong with them. Enter the downloaded data into them along with the keys. All fields except the DCW field must be completed. The missing data must be taken from the Channel Properties window. To do this, right-click on the channel in the channel list on the left or right of the ProgDVB window. The Channel Properties window opens. Check that the frequency, symbol rate, polarization and FEC of the signal indicated in it correspond to the channel parameters for which

Instructions

Think about which cable channels you want to decode. This is necessary in order to obtain necessary information such as a password. If you do not have special skills, then it is unlikely that you will be able to hack cable channel encoding methods such as Viaccess, Cryptowoks, Nagravision or Irdeto 2. Here you either need to invite a highly qualified specialist who can decode cable channels, or try to find it in the vastness of the world network keys to encoding.

Go online. As you know, you can find anything there. No one will post open encodings to paid cable channels. Register on several forums on relevant topics and ask for advice from people competent in this matter. Perhaps you will be lucky and you will come across the right forum thread, which already describes the steps necessary for decoding, as well as the keys to encoding pay cable television channels.

Ask your friends. Surely they or someone they know has already had to deal with pay cable television. Perhaps one of them will suggest a suitable specialist who can decode the channel you need. Please note that the signal coming to you from the common distributor is constantly recorded, so you should not get too impudent.

Order a specialist to decode several cable channels. The difference in signal level in this case will be insignificant. In this case, it will be taken as the standard permissible deviation.

If you cannot find a suitable specialist, enter into a personal agreement with the company that provides you with cable TV. Expand your existing package to include several channels you need. In this case, the monthly subscription fee is unlikely to increase significantly.

Cable television has already firmly entered the everyday life of those who like to “look into the TV box.” It replaced the broadcast one, at one point making bulky and clumsy television antennas unnecessary. How to open your own cable TV?

Instructions

Realistically evaluate the prospects for opening cable television in your locality. If it is a small city, then, on the one hand, there will be practically no competition, but on the other hand, the number of subscribers may be small, which will not cover all opening costs.

Immediately calculate the approximate subscription fee, taking into account the cable stretch from the distribution center to the place of residence of the average subscriber. This distance should not exceed 4 kilometers.

Draw up a competent business plan and attract investors to your project. But choose your investors with some caution. If you want to manage the enterprise yourself, and not let everything slide by handing over the management of the business to them. Typically, such a business reaches the break-even point within 5-7 months, and building a network will take at least 3 months.

Register a legal entity with the tax authorities, receive statistics codes and an extract from the Unified State Register of Legal Entities. Open bank accounts.

Enter into an agreement with a relay center in your city in case the satellite connection fails (anything can happen). Sign an agreement with RAO UES.

Find space for an office and editing room. It is better to rent office space in the center. Purchase all necessary equipment and tools.

Interview applicants for positions of office workers, managers and installers. When hiring installers, be sure to ask them to take a short theory test.

If you forget the password for an important information element, do not get upset prematurely. In such a situation, you have a chance to decode the forgotten combination of symbols. But be prepared to spend a certain amount of time decrypting it if your password was quite complex.

You will need

• - PasswordsPro program;
• - Internet access.

Instructions

Use one of the special programs that can decode passwords. As an example, you can take the PasswordsPro program. This utility works using the brute force method, checking word by word. The more complex the original password, the more time the program will take to decrypt. Short, meaningful passwords lend themselves most easily to this method. And also those to which weak encryption was applied.

There are two main ways to guess a password. The first is called a “dictionary attack.” After launching the program, you select a file containing a database of the most commonly used passwords. The program sequentially tries each password option until it finds the one you need or until it goes through all the values ​​in the database.

The second option is a “brute force attack.” This method is appropriate when you do not have any additional information about the password. First, the program iterates through all single-character values. Then he moves on to combinations of two symbols. Then from three and so on. Both password guessing options can take a considerable amount of time. This factor is influenced not only by the complexity of the initial password, but also

By installing satellite television, we count on hundreds of interesting channels to watch. But it turns out that many of them are broadcast in encrypted form. To access them, you must subscribe to an operator who has the right to a specific software package. But there are other ways.

First, let's figure out how satellite TV works. We install an antenna tuned to one or more satellites, a cable is laid into the apartment and connected to the receiver in which the channels are scanned. After this, all channels become available for viewing, except for commercial ones, for which you will have to pay for access. Legal or illegal. Illegal methods will be discussed below. But it should be remembered that these methods of watching closed TV channels are pirated, violate copyright and are punishable by law.

Cardsharing

It is possible to open most encrypted channels, but you will have to pay in any case. True, significantly less than when applying for an official access card. If you have a satellite dish, the Internet and a decoder, you can watch any closed channels in perfect quality using cardsharing. To do this, you need to connect to its server with an official access card, register and receive DW keys for a nominal fee. The setup process is extremely simple, and decoding occurs immediately after connecting and necessary adjustment of the equipment. A number of advantages that cardsharing has:

1. a large selection of channels for an affordable subscription fee;
2. high-quality broadcast;
3. low Internet traffic consumption;
4. independent selection of channels;
5. stable technical support and consulting;
6. convenient payment methods;
7. free testing.

Heavenly Sharing

What about those people who do not have access to the Internet? Craftsmen have found a solution to this problem by offering sharing using a satellite. To do this, you will need to install an additional plate or convector and other equipment. The entire list of necessary items, detailed diagrams and settings can be easily found on specialized websites or you can order installation from specialists.

The main advantage of sky sharing is the absence of Internet fees, and indeed its availability in general. The signal quality is quite high.

What about other methods?

Many users believe in the myth that there are certain keys known to a limited number of people that allow them to hack closed channels absolutely free. Alas! Some encodings are opened by the emulator, but for a short time, and the protection of channels is becoming more sophisticated. So it's easier to pay and enjoy watching with a clear conscience.

Subscribe to news