Today, in almost any restaurant, cafe or entertainment center you can connect to the Internet for free via a wifi hotspot. However, sometimes situations arise when, for some reason, there is no Internet access in a public place. If you have a laptop or Apple iPhone, you can bypass this problem. This phone can connect to the Internet using 3G or LTE standards.
Internet distribution from iPhone
To activate the ability to distribute the Internet via wifi on an Apple smartphone, you must first go into the settings and enable “3G”, “Cellular data” and “4G/LTE” if such a standard is supported by the phone model. This format will make it possible to transfer data much faster.
After this, select the “Modem Mode” menu item and activate this setting. Now the iPhone smartphone will be able to distribute the Internet via wifi. This is achieved by the phone's ability to operate as a modem for wireless communication. If the smartphone settings menu does not have an item such as “Modem Mode,” then you need to enter the “Cellular Communications” section. Here you can see all the settings that are used by phones to use mobile Internet. Similar information is also available on the official page of each cellular operator whose SIM card is installed in the device.
Here the owner of the smartphone will see three lines, namely: “APN”, “Username” and “Password”. Further down is the “Modem Mode” item. You need to select this part of the menu and copy here the information from the lines “APN”, “Username” and “Password”.
After entering this information, under the line “Cellular Communications” in the previous section of the phone settings, the inscription “Modem Mode” should also appear. By default, this option is disabled. The user needs to move the slider and thereby .
It would be helpful to say that under the line for enabling the phone’s operating mode as a modem, you can see brief instructions on how to configure the device to distribute mobile Internet via wifi.
In addition, in this part of the settings you can set a password for connecting other devices to the wifi network. To do this, you need to select the line “Wi-Fi Password” and in the window that opens, enter a combination of eight characters using the graphic keyboard.
Upon completion of these simple manipulations, the iPhone smartphone will switch to operating mode as a modem and will be able to provide Internet access to other devices connected via wifi to this device. To join the formed network, the user of another phone, tablet or computer will need to select the required connection in the settings and enter the password specified by the iPhone owner.
Need to enable tethering on iPhone 7 plus? There are 3 proven methods. Modern mobile devices have various functional features and applications that can deliver not only a lot of pleasure, but also significantly increase the comfort of using a mobile device.
One of the most interesting features of the iPhone 7 (7 plus) was the modem mode. This function is very convenient and interesting to use. With its help, users can activate this functionality on their own device, and then provide access to the Internet to other users or their computers. Customers will only need to connect to a mobile device and freely use the traffic of any telecom operator: MTS, Tele2, Megafon and Beeline.
Modem mode
iPhone 7 (7 plus) provides quick access to the functionality of a portable modem with other devices in the following ways:
If you use Wi-Fi, the phone will work as a portable router. Its name will be displayed in lists on other devices. After selecting an access point, just enter the password and use the Internet.
When connecting via USB, you need to connect the iPhone cable to another device, such as a personal computer, and turn on the hotspot.
Enable tethering mode on iPhone 7
Modem mode becomes available when cellular data is enabled in the iPhone menu. You need to go to the following items: “Settings” – “Cellular communications” – “Cellular data”. Then you should activate the slider.
Now let's look at the instructions for distributing the Internet in three ways.
WiFi connection
If this method is chosen, then Wi-Fi can only be used to distribute the Internet when the modem function is working.
The following steps must be followed:
- Selecting the “Settings” menu, then “Modem Mode”.
- Select “Wi-Fi Password”, indicate “Password” and click “Finish”.
- We activate “Modem Mode”, click on “Enable Wi-Fi and Bluetooth”.
- Disables Bluetooth function to save battery power.
- On the desired device, find the created network and enter the password for it.
- If the connection is successful, a blue bar will appear on your iPhone indicating the number of connected devices.
This method is common in cases where you need to distribute the Internet to a tablet, smartphone or laptop.
Note! To enable this method, you will need to obtain the APN data, username and password from your telecom operator. Details in the video below.
USB cable
Most often, this method is used to distribute the Internet from an iPhone 7 (7 plus) to a desktop computer or laptop.
The method is simpler than the previous one, follow these steps:
- Activating modem mode: “Settings” - select “Modem mode” and activate the “Modem mode” slider.
- We connect the gadget using a cable to the computer. The Internet connection should happen automatically.
- If this does not happen, then you need to independently select the name of your device from the list of networks.
Bluetooth
This method is the least common, since most users choose the first or second option.
Let's look at the instructions for distributing the Internet via Bluetooth:
- Go through the following points: “Settings” - “Modem mode”. Select “Enable Wi-Fi and Bluetooth”.
- Disable the Wi-Fi function.
- Turn on Bluetooth on the device and make a pair.
- We connect and the Internet should appear on the device.
If something happens to the Wi-Fi module, then Bluetooth, which is available on most laptops and smartphones, is useful for distributing the Internet.
Peculiarities
On the modem mode settings page, you can change passwords for the Wi-Fi network. To do this, you need to click on the password field, and then enter a new password on the keyboard that appears. In addition to the password, you can change the device name, which will be displayed on all devices with a wireless connection in the list of available networks.
iPhone 7 displays the number of connected devices on the lock screen. The number of gadgets is displayed in the status bar and next to the connection icon when the Internet distribution function is turned on.
If you have connected one gadget, and a higher number is displayed in the status bar, then another phone or neighbor has connected to your access point. In such cases, you should immediately change the set password.
It turns out that not everyone knows that the iPhone 4 with firmware 4.3.x can turn into an elegant 3G/Wi-Fi router. In Apple parlance this is called Personal Hotspot.
There are many situations for its use, but the meaning is the same - to help other devices access the World Wide Web. So let's go to Settings -> Personal Hotspot(or look deeper Settings -> Basic -> Net -> Personal Hotspot).
We turn on the slider, in response we are offered a password, something like head7032. Each iPhone has its own.
From this moment on, the phone raises a Wi-Fi network around itself, to which other gadgets can connect - for example, my iPad (which, although 3G, does not have a SIM card). Call up the list of available Wi-Fi networks, find the one with two “donuts” next to the name of your iPhone, enter the password - and now you’re surfing Twitter, reading news feeds, etc.
I remind you that you must have iPhone 4 + iOS 4.3.x.
By the way, if I ever decide to get an iPad 2, it will be a simple model. Because an iPhone will give me 3G.
Update: Wi-Fi point range is more than 10 meters and 2 walls. While “Personal Hotspot” is enabled, the iPhone 4 only receives EDGE/3G, but Wi-Fi detection is not available.
@ Nikita Goryainov: When there is an incoming call, all devices connected to the point are often cut off from the network. And sometimes the point on the iPhone itself is disconnected from the call; this bug was not fixed in 4.3.1
Modem mode on iPhone 6. How to turn on modem mode?
For many mobile device users, an important feature is the so-called “modem mode” (in English it sounds like “Personal Dot”). Personal item access to the network. “This is an option that allows the smartphone to distribute the Internet via Wi-Fi, which in turn is delivered through the mobile network by the telecom operator.
Additionally, the ability to create a Wi-Fi network allows you to connect two iPhones to each other to transfer files (though this can be done in other ways); as well as for sharing games that support multiplayer mode.
In this article, we will talk about how to work with this feature on the newest released iPhone - the sixth generation model.
How to activate modem on iPhone 6?
Let's start with general information. Make your smartphone start spreading the Internet, it's very simple. Just go to “Settings”, where the corresponding element will be available. It's called "Modem Mode". On the iPhone 6, as with other Apple technology running iOS 8, this option is activated with one click.
After that, if you go to the options tab, you will see the Wi-Fi settings, which will tell you how to connect to your network. We'll tell you a little further about how to fill them out.
Problem with iOS 8
Many users who updated the firmware on their device in the 8th generation operating system may experience a problem - it is unknown where to disappear modem mode. On the iPhone 6 - and often a person who needs to create a network with Internet distribution does not know what he needs to do to activate his modem. Some might suggest that this is a system failure. At the very least, iPhone user reviews on forums point to people's misunderstanding where this option is missing.
And indeed, from the outside it probably looks like a problem - the menu item that was previously available, responsible for working as a modem, disappears from the settings. But we assure you that there is nothing to worry about. Available as turn on modem mode on iPhone 6, we will tell you in this article.
Solution
So, after updating the firmware, the element really disappears from the settings - this is a fact. This is due to the fact that the configuration has been lost by the mobile access point to your operator's network. Information on this issue can be found in the Settings section in the Cellular section. After that, to set up tethering mode on your iPhone 6, you need to go to the Cellular Data section, where you will see what the problem is.
Below is a window called “Modem Mode”. It has APN, Username and Password columns. Remember: the same information you filled out and connect to the Internet in another settings window. That is, the iOS 8 developers simply separated the Internet configuration for the phone as a whole and for the modem. This is done, obviously, to prevent unauthorized write-off of traffic.
How enable modem mode on iPhone 6 / on other iPhone models
Turning the modem on or off on iPhone sixth/ Don’t forget to put it and subscribe to the channel, for me this is the best reward.
How turn on modem mode and distribute Wi-Fi in Iphone iOS 8, 9, 10, 11
ONLY FOR THOSE WHO DO NOT HAVE MODEM MODE IN THE MENU! THIS IS WHAT IT IS!!! Last time.
Here is the answer to the question: “Where modem mode on iPhone 6? “This has not disappeared anywhere - you just need to fill out the settings again after the update.
Data to be filled in
In order for readers who use the services of a specific operator to know what information they need to do to get started with dial-up, we are publishing a general set of data about the most popular operators.
- If you have MTS, we indicate internet.mts.ru in the APN, and mts in the other two fields.
- If “Megafon” - in the APN - Internet, and in the fields “username” and “password”. GData.
- For those who have Beeline, you need to write in the APN - internet.beeline.ru, in the remaining fields - beeline.
- Finally, for Tele2 in the APN we write internet.tele2.ru, and the remaining fields are left empty.
If you fill it out correctly, the tethering mode on the iPhone 6 you are using will appear immediately. In this way, you can distribute mobile Internet to your loved ones.
Wi-Fi Settings
Don't forget to also set up the Wi-Fi network that your device will create. The main thing for us is the network name and key access to it (password). By default, the name is "Your name" (which was entered when you first started the phone) with the iPhone prefix. At this point, those who are connected to the network will see that you are distributing it.
The second parameter required to be filled in is the network key. In other words, this is the password that anyone who wants to connect to you must enter. Minimum 8 characters required.
Data exchange
While we're explaining how to enable tethering on your iPhone 6 to give users Internet access, we'd also like to warn you that some carriers have disabled the ability to distribute Internet on unlimited plans. This is done to prevent excessive load on the network. True, the largest players in the communications market, such as MTS, Beeline, Megafon, are not affected by this.
There is another important point here - look at what exactly those to whom you distribute the Internet are doing online. If, for example, you have a few megabytes left in your account and you're tethering while your friend is watching video clips, those megabytes will likely run out soon, at which point your traffic will be charged differently. So, not only do you risk wasting extra money if you don't monitor your network traffic on time.
Selecting a tariff plan
Finally, if you have a constant need to create a Wi-Fi network with your phone, you may need to take care of a suitable data plan. To support multiple devices on the Internet, you obviously need to have a plan with a lot of Internet traffic, or better - even “unlimited”. Benefits Today, operators allow you to choose a tariff plan, depending on what services you want to connect. And many providers even have separate traffic packages that can be ordered “on top” of the services that you receive in the first place (minutes and SMS).
In this article we answered whether there is modem mode on the iPhone 6. It should be emphasized that these instructions are also relevant for other Apple devices based on iOS 8. In particular, the iPad of any generation has a similar difficulty with the fact that after the update, the tethering mode settings disappear. There is nothing to worry about, you already know how to act to spread the Internet again.
The ability to make an access point from an iPhone or iPad on iOS 7 will allow using the Wi-Fi protocol (there is also the possibility of using Bluetooth and USB) to distribute the Internet received through the cellular operator’s network to a desktop computer or any mobile device. Modern mobile Internet in third- or fourth-generation networks has a fairly decent speed, so it will make it possible to fully work with data from the Internet anywhere in the city without the need to constantly search for public Wi-Fi networks.
So how to make a hotspot on iOS 7 from an iPhone and iPad?
1. Go to the “Settings” application of the iOS 7 operating system on your iPhone or iPad, go to the “Cellular” menu:
2. By switching the switches to active mode, enable the ability to transmit cellular data through the mobile networks of the telecom operator, as well as, if necessary, use 3G or 4G:
3. Go to the “Modem Mode” menu of the “Settings” application of the iOS 7 operating system on iPhone and iPad:
4. Set a password for connecting to an access point created using an iPhone or iPad, and confirm the entry with the “Finish” button:
5. Move the switch for the “Modem mode” item to the active position:
When you connect mobile devices or a desktop computer to an iPhone or iPad that is acting as an access point, it will display a blue line under the operating system status bar (it will show the number of connected devices):
Thus, without any additional software, you can turn an iPhone or iPad running the iOS 7 operating system into an access point, with the help of which, using the Wi-Fi protocol (options with Bluetooth and USB are also possible), mobile Internet received via cellular networks will be distributed telecom operator. This solution will make it possible to use Internet data anywhere, eliminating the need to search for public Wi-Fi networks.
